• Korean Journal of Applied Biomechanics
• /
• v.21 no.1
• /
• pp.1-7
• /
• 2011

The purpose of this study was to investigate changes in kinetic and kinematic variables associated with an increase in upper body weight. Eighteen healthy male university students($175.96{\pm}4.19\;cm$, $70.79{\pm}8.26\;kg$) participated. Eight motion analysis cameras(Qualysis Oqus 500) and 2 force AMTI platforms(Advanced Mechanical Technologies Inc. OR6-7, US) were used to record motion and forces during the drop landing at a frequency of 120 Hz and 1200 Hz, respectively. QTM software(Qualisys Track Manager) was used to record the data, and the variables were analyzed with Visual 3D and Matlab 2009. For the drop landing, a box of $4{\times}2{\times}0.46\;m$ was constructed from wood. Knee and ankle maximum flexion angle, knee flexion angle, knee and ankle angle at landing, time for maximum ankle flexion after landing, and time for maximum knee flexion after landing were calculated. There was a significant change in the time for maximum and minimum ground force reaction and the time for maximum dorsal flexion after landing(p<.05) with increasing weight. There was no significant change for the hip, knee, and ankle ROM, whereas there was an increase in the angle ROM as the weight increased, in the order of ankle, knee, and hip ROM. This result shows that the ankle joint ROM increased with increasing weight for shock attenuation during the drop landing. There was a trend for greater ankle ROM than knee ROM, but there was no clear change in the ROM of the hip joint with increasing weight. In conclusion, this study shows the importance of ankle joint flexibility and strength for safe drop landing.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.4
• /
• pp.545-558
• /
• 2006

The current conditions of large water mains are evaluated by deteriorations and the causes of deterioration are investigated through visual assessments in the field, mechanical tests and analysis of chemical compositions in laboratory for each pipe material, unlined cast iron pipes (CIPs), ductile iron pipes (DCIPs) and steel pipes (SPs) Tubercles and scales from internal and external corrosion of unlined cast iron pipes were identified as the causes of functional performance limitations in large water mains. It is investigated that main causes of internal and external corrosion of water pipes are from lots of depositions of organic and inorganic substances on pipe surface, concentrated pitting, and uniform corrosion by local or global exfoliation or detachment of lining and coatings of DCIPs and SPs. Internal and external corrosion depths of CIPs were higher than those of DCIPs and SPs. Consequently, total corrosion rate summed internal and external corrosion rates of CIPs also were shown to be higher than those of DCIPs and SPs. The failure time from hole generation of CIPs by total corrosion rate was predicted to be taken sixteen years, and DCIPs and SPs were twenty-six years and one hundred and fifty three years. And longitudinal deflection of investigated water mains were not happened and mechanical strengths such as tensile strength, elongation, and hardness also were mostly suited to Korea Standards. It was thought that the weakness of tensile strength of one sample(S-11) was, however, due to higher carbon contents(%) in CIPs. Pipe deterioration score of S-46 was 55.2 and was preferentially assessed to be rehabilitated.

• Journal of architectural history
• /
• v.23 no.6
• /
• pp.7-20
• /
• 2014

The purpose of this paper is to study on the architecture and extension project for the Church of St. Lorenzo. This study is composed of a through analysis of the extension elements on the church building and extension type for extension project of the Church of St. Lorenzo. The results of study are as follows: 1. The extension project for the Church of St. Lorenzo was basically consisted of the concept of a horizontal extension plan through both the interior and exterior space of the church building. This project was the plan of concept of additional or affixing extension through existing spaces with necessary spaces to make up for the previous simple space and form as well as functional aspect. 2. The unit spaces of the nave, the aisle, the small chapels bilaterally adorning the aisles, the transept and the chapels around transepts, and the sacristies by the extension project for the Church of St. Lorenzo is composed of regulation, balance and harmony as geometric space composition according to simple proportion system on whole and parts as well as parts and parts, through the definite articulation by each space zoning. 3. The most important innovative aspect different to previous churches in the extension project for the Church of St. Lorenzo is the compositive system of each other symmetrical spaces through long centrical axis of central part, applying the module system for horizontal arrangement. In particular, the use of regular module on repetition and proportion of rhythm from architectural composition system was precisely composed with the alter that consists of visual focus to express more accurate perspective.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.6
• /
• pp.154-161
• /
• 2008

In this paper, a novel method is proposed using color and pattern information for recognizing some emotions included in a fertile. Here we use 10 Kobayashi emotion to represent emotions. - { romantic, clear, natural, casual, elegant chic, dynamic, classic, dandy, modem } The proposed system is composed of feature extraction and classification. To transform the subjective emotions as physical visual features, we extract representative colors and Patterns from textile. Here, the representative color prototypes are extracted by color quantization method, and patterns exacted by wavelet transform followed by statistical analysis. These exacted features are given as input to the neural network (NN)-based classifiers, which decides whether or not a textile had the corresponding emotion. When assessing the effectiveness of the proposed system with 389 textiles collected from various application domains such as interior, fashion, and artificial ones. The results showed that the proposed method has the precision of 100% and the recall of 99%, thereby it can be used in various textile industries.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.9
• /
• pp.179-185
• /
• 2013

In this paper, the RTA-ERP(Response Time Aligned-Evoked Relative Potential) was modelled to analyze the effect of motor activation pattern in response to visual sensory stimuli. Simon effect was analysed using the amplitude response of RTA-ERP and measured response time. The 'odd number' experiments, which identify an odd number mixed with same numbers, was performed with 15 healthy adult participants(9 males and 6 females, whose mean age of 31) for 7 minutes for each participant. Throughout experimentation, we observed that the proposed RTA-ERP can compensate the timing variation due to different neural processing procedures in the brain, and shows enhanced LRP(Lateralized Readiness Potential) and Pe(Error Related Positivity). Regarding to 'congruence' and 'incongruence' testing patterns, the amplitude of RTA-ERP and the response time for the 'congruence' are $0.03{\mu}V$ larger, and 43 ms faster than those for the 'incongruence', respectively. The amplitude characteristics of RTA-ERP, obtained by synchronizing the onset times with respect to response time, corresponds more likely to that of P300 in the ERP pattern (the characteristics of the Simon effect).

• Journal of the Korean Geotechnical Society
• /
• v.28 no.10
• /
• pp.69-77
• /
• 2012

Clogging of drainage pipes by scale is an important problem in civil engineering works. Although scale deposits can be removed by acid treatment or water jetting, these treatments are costly and have many disadvantages. In this study, scale samples from tunnel drainage pipes were analyzed using SEM-EDS and XRD. The main ingredient in scale was $CaCO_3$ of the calcite crystal form. Drainage experiments and recirculation type experiments were conducted to control and remove scale deposits, which were determined through visual and weight measuring analysis. As a result, Quantum Stick has the effect of limiting formation of scale.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.6
• /
• pp.891-898
• /
• 2012

The study for the passenger's comfortableness of vehicles and the arousal of car drivers has been done widely. On the other hand, there are few studies for the locomotive engineers. Human error means that the mistakes made by human, recently it receives attention in the field of safety engineering and human engineering. Comparing the operating condition of train with car, because of the simplification of the visual stimulus, the arousal level on the train goes down easily. The arousal level down makes judgement down, the accident risk from human error is getting bigger. In this study, we measured bio-signals(ECG, EDA, PPG, respiration and EEG) from 6 locomotive engineers to evaluate their arousal state while they operated the train. Also we recorded the 3 axes acceleration signal showing the vibration state of train. Also, the existence of tunnels were simultaneously measured. At the station section where the train speed goes down, the size of vector's sum decreases because of reduced vibration. Beta component in EEG tends to increase at the entering point of each station and tunnel. It is due to the arousal reaction and tension growth. The mean SCR(skin conductance response) was more increased in neutral section. As the button control movement (body movement) increases in the neutral section, it is appeared that SCR increase. RR interval tends to gradually increase during train operation for 1 hour 40 minutes. However, It tends to sharply decrease at the stop station because strong concentration needed to stop train on the exact point. The engineer's arousal reaction can be checked through analysing the bio-signal change during train operation. Therefore, if this analysing result is adopted to the sleepiness prevention caution system, it will be useful for the safety train operation.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.6
• /
• pp.2853-2856
• /
• 2016

Background: Many studies have pointed to strategies to cope with patient anxiety in colposcopy. Evidence shows that patients experienced considerable distress with the large loop excision of transformation zone (LLETZ) procedure and suitable interventions should be introduced to reduce anxiety. This study aimed to investigate the effects of music therapy in patients undergoing LLETZ. Materials and Methods: A randomized controlled trial was conducted with patients undergoing LLETZ performed under local anesthesia in an out patient setting at Ramathibodi Hospital, Bangkok, Thailand, from February 2015 to January 2016. After informed consent and demographic data were obtained, we assessed the anxiety level using State Anxiety Inventory pre and post procedures. Music group patients listened to classical songs through headphones, while the control group received the standard care. Pain score was evaluated with a visual analog scale (VAS). Statistical analysis was conducted using Pearson Chi-square, Fisher's Exact test and T-Test and p-values less than 0.05 were considered statistically significant. Results: A total of 73 patients were enrolled and randomized, resulting in 36 women in the music group and 37 women in the non-music control group. The preoperative mean anxiety score was higher in the music group (46.8 VS 45.8 points). The postoperative mean anxiety scores in the music and the non-music groups were 38.7 and 41.3 points, respectively. VAS was lower in music group (2.55 VS 3.33). The percent change of anxiety was greater in the music group, although there was no significant difference between two groups. Conclusions: Music therapy did not significantly reduce anxiety in patients undergoing the LLETZ procedure. However, different interventions should be developed to ease the patients' apprehension during this procedure.

• Journal of the Korean Society of Costume
• /
• v.62 no.4
• /
• pp.81-90
• /
• 2012

The contents of this study are as follows. First, an academic understanding has been achieved by exploring the theoretical concept "allegory", and a new theoretical approached methodology has been sought. Second, an analysis-index of fashion illustration cases has been suggested based on the allegory theory of Craig Owens. Third, in order to draw the characteristics of fashion illustration as viewed from the allegorical viewpoint and find out its feasibility, the case studies has been referred and the internal significance, external significance that combines different characteristics has been extracted. In regards to this study method, literature studies and case studies has been done in parallel with each other. This study was done in the following sequence: the establishment of the study system, the drawing of the allegory-associated concepts and the discovering the characteristics of aesthetic expressions. The results of this study on the expression characteristics of fashion illustration as viewed from the allegorical viewpoint of Craig Owens are as follows. First, the borrowing of image, which is a characteristic of allegory, contains the meaning of uncertainty in the fashion illustration as it expresses the image-synthesis and forms a completely different meaning as the fixed meaning is dissolved and it is utilized as a photo-montage technique. Second, the inference of pictogram is the mixture of linguistic medium and visual medium. Fashion illustration utilizes the characters and transmits the fashion information visually and immanently. It has the characteristic of making the information into pictograms and the internal significances of mutual-text with communication function. Third, the uniqueness of location in the fashion illustration has the special nature of utilized mediums as it is used for advertising or publicizing. The fashion illustration from the viewpoint of allegory has the impermanency of existing only for a limited time and reflects the coincidence that gives the meaning of utilized location according to the season trend. Fourth, the cross-breeding is expressed as the mixture of various materials in the fashion illustration. The expressions made by the mixture of media, such as the use of computer graphic programs mixed together with various materials showed the trend of diversity and genre dissolution.

• Journal of the Korean Society of Costume
• /
• v.57 no.10
• /
• pp.156-168
• /
• 2007

Brands started to manufacture consumer-oriented products and look for active methods to appeal their brands to consumers, in the 1990s. As a result, actively adopting graphic design to clothing designs has recently become an important strategy among others. Graphic design has important significance in contemporary fashion design in the aspect that it has expanded the range of expressive methods by bringing over expressive methods of visual design, and has led to an increase in sales due to consumer satisfaction, but it has been vaguely handled together with textiles design, and research on the topic has been insufficient. Therefore this study aimed to clearly define the idea of graphic design based on documentary research, and analyze applying case and formative features of graphic design expressed in clothing, through case studies from 2004 to 2006, and derive the trends of graphic design expressed in contemporary fashion design. The results of this study are as follows. The common characteristics of images that reflect recent graphic design trends in fashion design are hand writing and irregular composition, and images that actively pursued these pointes were retro and craft images, and modern and sporty images reflected these graphic design trends in a comparatively passive manner. It is important to maintain style differentiation rather than indiscreetly adopting graphic design trends to clothing, and to appropriately apply trend characteristics of fashion design and other design areas. Expressive methods of design are expected to expand through appropriate application and development of graphic design, and can potentially provide a new solution to brand differentiation.