• 한국통신학회논문지
• /
• 제31권5C호
• /
• pp.512-518
• /
• 2006

몰입감을 향상시키는 초대형 화면을 생성하기 위하여 여러 개의 프로젝터에서 투사되는 영상을 연결하여 마치 하나의 프로젝터에서 투사되는 영상처럼 보이게 하는 기술에 대한 연구가 활발히 진행 되고 있다. 각 프로젝터의 밝기는 그 모델이나 램프의 사용기간에 따라서 달라진다. 이를 보정하기 위하여 여러 프로젝터에서 투사된 영상들의 밝기를 균일하게 맞추는 일이 중요하다. 기존의 방법들은 프로젝터의 밝기 값만을 고려한 방법으로 밝기 보정을 하면 디스플레이 되는 화면이 어두워지는 경향이 있다. 본 논문에서는 프로젝터의 밝기만을 고려하던 기존의 밝기 보정 방법들과는 달리 프로젝터의 입력 영상의 밝기를 고려한 프로젝터의 밝기 보정방법을 제안하였다. 그 결과 기존의 방법들에 비해 멀티 프로젝터를 사용하여 스크린에 투사된 영상들의 밝기를 개선하여 자연스러운 영상을 얻을 수 있다. 이상의 과정을 simulation하여 그 동작을 확인하였고, 실제 영상에 적용하여 그 성능의 우수성을 입증하였다.

• 대한전자공학회논문지
• /
• 제27권10호
• /
• pp.68-77
• /
• 1990

본 논문에서는 CAD 시스템의 신경망을 이용한 자동 입력기 구축을 위한 논리 심볼 인식방법을 제시한다. 손으로 작성한 도면을 인식하기 위해 특징 추출과 log mapping, 그리고 패턴 인식의 다단계 과정을 거친다. 각 논리 심볼의 현태 정보를 추출하기 위해 억제 가중치를 학습할 수 있는 경쟁 학습법을 제안하고 회전과 크기의 변화를 병진된 결과로 나타내는 log mapping을 하고 형태가 변한 심볼을 인식할 수 있도록 겹쳐지는 수용야(Receptive field)를 준비하여 error back propagation을 이용한 다층망으로 심볼을 인식한다.

• 대한자기공명의과학회:학술대회논문집
• /
• 대한자기공명의과학회 2001년도 제6차 학술대회 초록집
• /
• pp.111-111
• /
• 2001

목적： To evaluate the feasibility of the event-related functional MR study using power grip studying the hand motor system 대상 및 방법： Event-related functional MRI was performed on a 1.5T MR unit in seven norm volunteers (man=7, right-handedness=2, left-handedness=5, mean age： 25 years). A single-shot GRE-EPI sequence (TR/TE/flip angle： 1000ms/40ms/90, FOV = 240 mm matrix= 64$\times$64, slice thickness/gap = 5mm/0mm, 7 true axial slices) was used for functiona MR images. A flow-sensitive conventional gradient echo sequence (TR/TE/flip angl 50ms/4ms/60) was used for high-resolution anatomical images. To minimize the gross hea motion, neck-holders (MJ-200, USA) were used. A series of MR images were obtained in axial planes covering motor areas. To exclude motion-corrupted images, all MR images wer surveyed in a movie procedure and evaluated using the estimation of center of mass of ima signal intensities. Power grip task consisted of the powerful grip of all right fingers and hand movement ta used very fast right finger tapping at a speed of 3 per 1 second. All tasks were visual-guid by LCD projector (SHARP, Japan). Two tasks consisted of 134 phases including 7 activatio and 8 rest periods. Active stimulations were performed during 2 seconds and rest period were 15 seconds and total scan time per one task was 2 min 14 sec. Statistical maps we obtained using cross-correlation method. Reference vector was time-shifted by 4 seconds an Gaussian convolution with a FWHM of 4 seconds was applied to it. The threshold in p val for the activation sites was set to be 0.001. All mapping procedures were peformed usin homemade program an IDL (Research Systems Inc., USA) platform. We evaluated the activation patterns of the motor system of power grip compared to hand movement in t event-related functional MRI.

• 대한인간공학회지
• /
• 제31권3호
• /
• pp.427-435
• /
• 2012

The aim of this study is to investigate facial temperature changes induced by facial expression and emotional state in order to recognize a persons emotion using facial thermal images. Background: Facial thermal images have two advantages compared to visual images. Firstly, facial temperature measured by thermal camera does not depend on skin color, darkness, and lighting condition. Secondly, facial thermal images are changed not only by facial expression but also emotional state. To our knowledge, there is no study to concurrently investigate these two sources of facial temperature changes. Method: 231 students participated in the experiment. Four kinds of stimuli inducing anger, fear, boredom, and neutral were presented to participants and the facial temperatures were measured by an infrared camera. Each stimulus consisted of baseline and emotion period. Baseline period lasted during 1min and emotion period 1~3min. In the data analysis, the temperature differences between the baseline and emotion state were analyzed. Eyes, mouth, and glabella were selected for facial expression features, and forehead, nose, cheeks were selected for emotional state features. Results: The temperatures of eyes, mouth, glanella, forehead, and nose area were significantly decreased during the emotional experience and the changes were significantly different by the kind of emotion. The result of linear discriminant analysis for emotion recognition showed that the correct classification percentage in four emotions was 62.7% when using both facial expression features and emotional state features. The accuracy was slightly but significantly decreased at 56.7% when using only facial expression features, and the accuracy was 40.2% when using only emotional state features. Conclusion: Facial expression features are essential in emotion recognition, but emotion state features are also important to classify the emotion. Application: The results of this study can be applied to human-computer interaction system in the work places or the automobiles.

• Journal of Korean Neurosurgical Society
• /
• 제53권5호
• /
• pp.312-315
• /
• 2013

Aspergillosis in the central nervous system (CNS) is a very rare disease in immune-competent patients. There was a case of a healthy man without a history of immune-compromised disease who had invasive aspergillosis with unusual radiologic findings. A 48-year-old healthy man with diabetes mellitus, presented with complaints of blurred vision that persisted for one month. Brain magnetic resonance imaging (MRI) showed multiple nodular enhancing lesions on the right cerebral hemisphere. The diffusion image appeared in a high-signal intensity in these areas. Cerebrospinal fluid examination did not show any infection signs. An open biopsy was done and intraoperative findings showed grayish inflammatory and necrotic tissue without a definitive mass lesion. The pathologic result was a brain abscess caused by fungal infection, morphologically aspergillus. Antifungal agents (Amphotericin B, Ambisome and Voriconazole) were used for treatment for 3 months. The visual symptoms improved. There was no recurrence or abscess pocket, but the remaining focal enhanced lesions were visible in the right temporal and occipital area at a one year follow-up MRI. This immune-competent patient showed multiple enhancing CNS aspergillosis in the cerebral hemisphere, which had a good outcome with antifungal agents.

• 대한기계학회논문집B
• /
• 제30권10호
• /
• pp.973-981
• /
• 2006

Recently there is an increasing interest in particulate matter emission because of new emission regulations, health awareness and environmental problems. It requires to improve particulate measurement techniques as well as to reduce soot emissions from combustion systems. As mentioned above, it is demanded that reduction techniques together with measurement techniques of exhausted particulate matters in combustion systems such as vehicles. However, measurement techniques of particulate matters should be prior to reduction techniques of that because it is able to know an increase and a decrease of exhausted particulate matters when measured particulate matters. Therefore, in this study, we report the measurement of soot primary-particle size using time-resolved laser induced incandescence (TIRE-LII) technique in laminar ethylene diffusion flame. As an optical method, laser induced incandescence is one of well known methods to get information for spatial and temporal soot volume fraction and soot primary particle size. Furthermore, TIRE-LII is able to measure soot primary particle size that is decided to solve the decay ate of signal S $(t_1)$ and S $(t_2)$ at two detection time. In laminar ethylene diffusion flame, visual flame height is 40 mm from burner tip and measurement points are height of 15, 20, 27.5, 30 mm above burner tip along radial direction. As increasing the height of the flame from burne. tip, primary particle size was increased to HAB(Height Above Burner tip)=20mm, and then decreased from HAB=27.5 mm to 30 mm. This results show the growth and oxidation processes for soot particles formed by combustion.

• Tribology and Lubricants
• /
• 제36권5호
• /
• pp.253-261
• /
• 2020

In this paper, we present an experimental investigation of the frequency characteristics and a visual inspection of an oxidizer pump with a modified rear-floating ring seal for a 7-tonf turbopump. An oxidizer pump typically operates at high rotational speeds and under cryogenic conditions. Despite its low hydraulic efficiency, the floating ring seal is frequently employed as a leakage control solution for turbomachinery because it effectively reduces abrasion by friction. When the oxidizer pump starts up, the floating ring moves excursively but locks up stably against the pump casing when the contact pressure increases. The compressive force on the floating ring depends on the hydrodynamic forces induced by the flow through the floating ring. This force is controlled by the nose position of the floating ring. Based on a validation test for a 7-tonf turbopump with two types of floating rings, we concluded that the floating ring with a small diameter nose can move easily with a low contact pressure in the cooling path. This leads to instability of the pressure fluctuation around the floating ring. In contrast, a floating ring with a large diameter nose has a high contact pressure and attaches strongly to the casing, which causes wear and frictional oxidation between the contact surfaces of the impeller and the floating ring.

• 한국의류학회지
• /
• 제40권4호
• /
• pp.600-614
• /
• 2016

This study specifies the definition and characteristics of fake fashion by categorizing cases through an analytical framework that uses the concept of simulacre, which is one of the theories that explains the reproduction of images and symbols in a modern consumer society. The presentation stages of modern fake fashion based on Baudrillard's concept of simulacre are as follows: Stage 1 focuses on the realistic imitation of the original, Stage 2 maintains a similarity with the original while transforming through the distortion of shape or visual perception, Stage 3 is the reality of the original which has become significantly vague and actively involves the designer's creativity, and Stage 4 forms a new value and an independent aura beyond reproducing the original. The presentation techniques of modern fake fashion viewed in the concept of simulacre can be classified into optical illusions by reproduction, use of a fake object, use of unusual shapes, and re-signifying through borrowing. As a result of applying the collected cases to the analytical framework, image reproduction in Stage 1 with imitative nature is a counterfeit that cannot be regarded as fake fashion, and fake fashion in Stage 4 (that can be referred to as simulacre) is fashion with symbolic and multiple meanings with new and creative designs. Modern fake fashion analyzed in the concept of simulacre transforms or reproduces the preexisting original with the purpose of merely creating original designs as well as acts as a new symbolic signal that creates a new aura and sets a trend with a message.

• 한국의류학회지
• /
• 제41권6호
• /
• pp.1022-1038
• /
• 2017

Wearable smart products contributed to expand the concept of modern clothing in terms of closer communication between wearers and the surrounding environment. This study investigated the concept of wearable smart actuators and characteristics of actuating feedback. The representative product development trends over the past 10 years are examined based on the method of actuating feedback. A first keyword search from Naver and Google reused to select the final 58 products based on the second key keyword actuating feedback. The wearable smart actuator system works in a similar way to a human body system such as those of the information processing process. Actuating feedback is delivered directly to the user as the last signal of the system, which has visual, auditory and tactile feedback. It works in complex at the device to be delivered to the user. Actuator feedback is divided into three types of active and passive, depending on the user situation, the overall purpose of the product, the collected information, and the device dependency. Active actuating feedback determines and actuates the situation on behalf of the user when the user is in an emergency or a disability situation. Passive actuating feedback plays a role in environmental monitoring to help in a healthy daily life.

• 천문학회보
• /
• 제36권2호
• /
• pp.152.1-152.1
• /
• 2011

We report preliminary results of long-slit near-infrared (NIR) spectroscopy of Luminous Blue Variables (LBVs) with moderate resolution of R ~ 2400. We obtained Jshort (1.04-1.26 micron) and Ks (2.02-2.31 micron) band spectra of 4 LBVs and 3 LBV candidates in Southern hemisphere using IRIS2, infrared imager and spectrograph, mounted on the 4-m Anglo-Australian Telescope. All targets are fairly bright in NIR so that we can obtain high signal-to-noise ratio for clear line detection and modeling. They are also widely distributed in the HR diagram so that we can compare the spectral properties of LBVs in different temperature and luminosity ranges. Among them, we present the results of two well-known LBVs AG Car and HR Car. Their spectra show similar properties with hydrogen, He I, and metallic lines such as Fe II and Mg II, most of them in emission. We discuss, in particular, the He I 1.083 micron lines formed in stellar wind because these two LBVs show large variation in their He I line intensities, compared to previous studies. Since the He I 1.083 line is known to be anticorrelated with the photometric variation of LBVs, strong line intensities with P-Cygni profiles in both stars indicate that they are now near the visual minimum phase. We model the obtained spectra using non-LTE atmosphere code CMFGEN of Hillier (1998) to derive stellar parameters such as wind velocity and mass loss rate, and discuss the long-term variability of stellar parameters of these LBVs. deduced from our otometric solution.