• 한국산업정보학회논문지
• /
• 제12권5호
• /
• pp.14-22
• /
• 2007

PACS is an integrated communication network system which is consists of image acquisition devices, storage archiving units, display stations, computer processors, and database management systems. In medical industry, they have been introduced the medical equipments through PACS systems based on the DICOM standard. In this paper, we have reviewed the visual quality performance of various JPEG and JPEG2000 compression options for medical images. Through the realized the transmission mode on DICOM standard, the developed DICOM viewer has been shown in medical applications.

• Structural Engineering and Mechanics
• /
• 제52권2호
• /
• pp.307-322
• /
• 2014

A two-step procedure to detect and quantify damages in structures from changes in curvature mode shapes is presented here. In the first step the maximum difference in curvature mode shapes of the undamaged and damaged structure are used for visual identification of the damaged internal-substructure. In the next step, the identified substructures are searched using unified particle swarm optimization technique for exact identification of damage location and amount. Efficiency of the developed procedure is demonstrated using beam like structures. This methodology may be extended for identifying damages in general frame structures.

• 항공우주시스템공학회지
• /
• 제1권2호
• /
• pp.6-12
• /
• 2007

Flight modes of automatic flight control system for light general aviation flight deck. Garmin G1000, were realized using Stateflow. In developing aircraft, it is difficult to verify the operational flight program in particular branch statement because developer can not see any visual logical steam. So, Stateflow has been used to visualize logical stream, transition from one flight mode to another flight mode. The performance was approved by applying flight mode transition conditions of G1000 to proposed transition system that is composed of states, switches, events, data and transition conditions. DURMI-II was used as 6-DOF simulation model.

• Journal of information and communication convergence engineering
• /
• 제7권4호
• /
• pp.501-506
• /
• 2009

In the H.264/ AVC video coding standard, the intra-prediction coding with various block sizes offers a considerably high improvement in coding efficiency compared to previous standards. In order to achieve this, H.264/AVC uses the Rate-distortion optimization (RDO) technique to select the best intraprediction mode for a macroblock, and it brings about the drastic increase of the computation complexity of H.264 encoder. To reduce the computation complexity and stabilize the coding performance on visual quality, this paper proposed a fast intra-prediction mode decision algorithm using non-parametric thresholds and simplified directional masks. The use of nonparametric thresholds makes the intra-coding performance not be dependent on types of video sequences and simplified directional masks reduces the compuation loads needed by the calculation of local edge information. Experiment results show that the proposed algorithm is able to reduce more than 55% of the whole encoding time with a negligible loss in PSNR and bitrates and provides the stable performance regardless types of video sequences.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권5호
• /
• pp.1711-1725
• /
• 2014

Multi-target tracking is the main purpose of many video surveillance applications. Recently, multi-target tracking based on the particle filter method has achieved robust results by using the data association process. However, this method requires many calculations and it is inadequate for real time applications, because the number of associations exponentially increases with the number of measurements and targets. In this paper, to reduce the computational cost of the data association process, we propose a novel multi-target tracking method that excludes particle samples in the overlapped predictive region between the target to track and marginal targets. Moreover, to resolve the occlusion problem, we define an occlusion mode with the normal dynamic mode. When the targets are occluded, the mode is switched to the occlusion mode and the samples are propagated by Gaussian noise without the sampling process of the particle filter. Experimental results demonstrate the robustness of the proposed multi-target tracking method even in occlusion.

• 제어로봇시스템학회논문지
• /
• 제18권7호
• /
• pp.650-657
• /
• 2012

An effective dual-mode camera system(a passive wide-angle camera and a pan-tilt-zoom camera) is proposed in order to improve the performance of visual surveillance. The fixed wide-angle camera is used to monitor large open areas, but the moving objects on the images are too small to view in detail. And, the PTZ camera is capable of increasing the monitoring area and enhancing the image quality by tracking and zooming in on a specific moving target. However, its FOV (Field of View) is limited when zooming in on a specific target. Therefore, the cooperation of wide-angle and PTZ cameras is complementary. In this paper, we propose an automatic initial set-up algorithm and coordinate transform method from the wide-angle camera coordinate to the PTZ one, which are necessary to achieve the cooperation. The automatic initial set-up algorithm is able to synchronize the views of two cameras. When a moving object appears on the image plane of a wide-angle camera after the initial set-up positioning, the obtained values of the wide-angle camera should be transformed to the PTZ values based on the coordinate transform method. We also develope the PTZ control method. Various in-door and out-door experiments show that the proposed dual-camera system is feasible for the effective visual surveillance.

• 미술이론과 현장
• /
• 제4호
• /
• pp.105-121
• /
• 2006

The term 'modern', in broader sense, refers to the concepts like modernity, modernization, modernism and the like, which came from Westernization impling the recognition of indigenous culture as being inferior to Western culture by comparison along with the expanded influences of the Empire of Japan. These concepts, however, rather than evolving from Western standards, came into being as a form of civilization led by Japan which had already tasted the fruits of modernization by 1920s. Since 1920s, the policy of, so-called, reconstructing Asian countries by Japan came to create eastern way of modernism, as a new East Asian trend mainly revealed in China which was against colonization after Japan's invasion and conquest of Manchuria. Therefore, Eastern' modern' unlike Western one could be understood in the widespread terminology, 'Modern(摩登)' in Shanghai, reflecting consciousness like 'Fashion' or 'Trend' in female images on a variety of visual media. By 1930s it was the most notable that 'modern' was accepted as something similar with 'Fashion', or 'Trend' in sociocultural contexts. These atmosphere had led commercial arts to enable to communicate with the public in a great deal of supports and success in Shanghai which was widely regarded as the citadel for the inflow of Western culture, among which transformations in female images were remarkable as a representative form of culture. It is also remarkable that 'historical modernity' transforming from the feudal age to modern society was considered a synchronic modernity, and nationalism was regarded as a sort of being modern, while involved in the newly-changed female images as a fashion mode. Changes in fashion including hair style in Shanghai by 1930s, as a way of expressions showing what was modern through commercial artistic productions, were easily noticed in visual media as an outlet of modern women's inner desire revealing their pursuit for new mode of life in metropolitan cities. As a characteristic of the time creating a new code of visual female images, it is notable that there existed another form of 'modern' satisfying socio-cultural needs of the general public seeking for being 'modern'.

• 대한간호학회지
• /
• 제33권5호
• /
• pp.538-543
• /
• 2003

Purpose: The purpose of this study was to identify the stress and the coping methodes in the cancer patients and their caregivers. Method: The stress method was measured by V AS(Visual Analogue Scale). The coping methodes was measured using the modified Ways of Coping Questionnaire. The phases of patient illness consisted of Ist(initial) stage, and 2nd(recurred) stage and 3rd(terminal) stage based on Lewandowski & Jones(1988) method. The data were collected by a survey of convenience sampling of 257 cancer patients and 196 of their caregivers from two hospitals in Seoul. The data were analyzed using paired t-test, unpaired t-test. Result: The stress level of cancer patients was lower than their caregivers. The cancer patients used emotion-focused coping mode than problem-focused coping mode. The caregivers problem-focused coping mode over emotion-focused coping mode. In the problem-focused coping mode, the caregivers significantly used two coping strategies that were ‘positve cope’, ‘information seeking’ more than patients. In emotion-focused coping mode, the caregivers significantly used one coping strategies that was ‘wish’ more than patients. The patients tended to used two coping strategies that were ‘blame’ and ‘emotion expression’ more than the caregivers. Conclusion: Further study needs to be done to positively identify these coping methods and develop interventions to assist patients and their caregivers.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.491-495
• /
• 2002

In the paper, a Visual factory model for a optical-components manufacturing process is built. The optical-components manufacturing process is composed of 3 operation processes; optical sub assembly process, package assembly process, and fiber assembly process. Each process is managed not a batch mode, which is one of most popular manufacturing styles to produce a great deal of industrial output, but though a modular cell. In the processes, a modular cell has to be processed independently of the other cells. Optimization for the composition of assembly cell in the optical-components system is made by the Visual factory model.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.636-639
• /
• 2002

In the paper, a Visual factory model for a optical-components manufacturing process is built. The optical-components manufacturing process is composed of 3 operation processes; optical sub assembly process, package assembly process, and fiber assembly process. Each process is managed not a batch mode, which is one of most popular manufacturing styles to produce a great deal of industrial output, but though a modular cell. In the processes, a modular cell has to be processed independently of the other cells. Optimization for the composition of assembly cell in the optical-components system is made by the Visual factory model.