• 한국생산제조학회지
• /
• 제20권4호
• /
• pp.386-394
• /
• 2011

This paper is concerned with the application of the vision control scheme for robot's point placement task in discontinuous trajectory caused by obstacle. The proposed vision control scheme consists of four models, which are the robot's kinematic model, vision system model, 6-parameters estimation model, and robot's joint angles estimation model. For this study, the discontinuous trajectory by obstacle is divided into two obstacle regions. Each obstacle region consists of 3 cases, according to the variation of number of cameras that can not acquire the vision data. Then, the effects of number of cameras on the proposed robot's vision control scheme are investigated in each obstacle region. Finally, the practicality of the proposed robot's vision control scheme is demonstrated experimentally by performing the robot's point placement task in discontinuous trajectory by obstacle.

• 한국기계가공학회지
• /
• 제17권5호
• /
• pp.161-172
• /
• 2018

This paper proposed the robot vision control method to track a moving rigid body target using the vision system model that can actively control camera parameters even if the relative position between the camera and the robot and the focal length and posture of the camera change. The proposed robotic vision control scheme uses a batch method that uses all the vision data acquired from each moving point of the robot. To process all acquired data, this robot vision control scheme is divided into two cases. One is to give an equal weight for all acquired data, the other is to give weighting for the recent data acquired near the target. Finally, using the two proposed robot vision control schemes, experiments were performed to estimate the positions of a moving rigid body target whose spatial positions are unknown but only the vision data values are known. The efficiency of each control scheme is evaluated by comparing the accuracy through the experimental results of each control scheme.

• 한국정밀공학회지
• /
• 제29권9호
• /
• pp.986-994
• /
• 2012

This paper is concerned with the application of the vision control algorithm with weighting matrix in robot point placement task. The proposed vision control algorithm involves four models, which are the robot kinematic model, vision system model, the parameter estimation scheme and robot joint angle estimation scheme. This proposed algorithm is to make the robot move actively, even if relative position between camera and robot, and camera's focal length are unknown. The parameter estimation scheme and joint angle estimation scheme in this proposed algorithm have form of nonlinear equation. In particular, the joint angle estimation model includes several restrictive conditions. For this study, the weighting matrix which gave various weighting near the target was applied to the parameter estimation scheme. Then, this study is to investigate how this change of the weighting matrix will affect the presented vision control algorithm. Finally, the effect of the weighting matrix of robot vision control algorithm is demonstrated experimentally by performing the robot point placement.

• 한국생산제조학회지
• /
• 제19권1호
• /
• pp.15-25
• /
• 2010

The objective of this study is to investigate the optimal arrangement of cameras used for the robot's vision control scheme. The used robot's vision control scheme involves two estimation models, which are the parameter estimation and robot's joint angle estimation models. In order to perform this study, robot's working region is divided into three work spaces such as left, central and right spaces. Also, cameras are positioned on circular arcs with radius of 1.5m, 2.0m and 2.5m. Seven cameras are placed on each circular arc. For the experiment, nine cases of camera arrangement are selected in each robot's work space, and each case uses three cameras. Six parameters are estimated for each camera using the developed parameter estimation model in order to show the suitability of the vision system model in nine cases of each robot's work space. Finally, the robot's joint angles are estimated using the joint angle estimation model according to the arrangement of cameras for robot's point-position control. Thus, the effect of camera arrangement used for the robot's vision control scheme is shown for robot's point-position control experimentally.

• 한국생산제조학회지
• /
• 제26권1호
• /
• pp.50-58
• /
• 2017

This paper proposes a real-time robotic vision control scheme using the weighting matrix to efficiently process the vision data obtained during robotic movement to a target. This scheme is based on the vision system model that can actively control the camera parameter and robotic position change over previous studies. The vision control algorithm involves parameter estimation, joint angle estimation, and weighting matrix models. To demonstrate the effectiveness of the proposed control scheme, this study is divided into two parts: not applying the weighting matrix and applying the weighting matrix to the vision data obtained while the camera is moving towards the target. Finally, the position accuracy of the two cases is compared by performing the slender bar placement task experimentally.

• 한국정밀공학회지
• /
• 제32권5호
• /
• pp.471-481
• /
• 2015

This paper presents the robot vision control schemes using Extended Kalman Filter (EKF) method for the slender bar placement in the appearance of obstacles during robot movement. The vision system model used for this study involves the six camera parameters($C_1{\sim}C_6$). In order to develop the robot vision control scheme, first, the six parameters are estimated. Then, based on the estimated parameters, the robot's joint angles are estimated for the slender bar placement. Especially, robot trajectory caused by obstacles is divided into three obstacle regions, which are beginning region, middle region and near target region. Finally, the effects of number of obstacles using the proposed robot's vision control schemes are investigated in each obstacle region by performing experiments of the slender bar placement.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.107-108
• /
• 2011

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.63-64
• /
• 2010

• 대한기계학회논문집A
• /
• 제40권3호
• /
• pp.305-315
• /
• 2016

본 논문은 로봇이 이동하는 동안 장애물이 출현하는 불확실한 환경에서 N-R방법을 이용하여 개발된 로봇 비젼제어 기법의 효율성을 알아보고자 한다. 본 연구에 사용되는 비젼 시스템 모델은 6개의 카메라 매개변수(C1~C6)를 포함한다. N-R방법의 일괄처리기법을 이용하여 사용한 각 카메라에 대한 6개의 카메라 매개변수의 추정을 개발하고, 각 카메라에 대한 6개의 매개변수를 사용한 로봇 관절각 기법을 개발하여 얇은 막대 배치 작업을 수행한다. 특히, 불확실한 환경에서 얇은 막대 배치 작업을 위해 장애물에 의한 불연속 궤적은 시작영역, 중간영역, 타겟 근처 영역 등 3개 영역으로 구분하였다. 제안된 로봇 비젼 제어기법을 사용하여 얇은 막대 배치 실험을 통해 각 장애물 영역에서 장애물의 개수 증가에 따른 영향을 조사하고자 한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.180.4-180
• /
• 2001

This paper describes a vision-based line-tracking system for AGV and steering control scheme. For detect the guideline quickly and exactly, We use four line-points which complement and predict each other. This low-cost line-tracking system is efficiently using PC-based real-time vision processing, Steering control is studied through an steering controller with guide-line angle and line-point error. This method is tested via a typical AGV with a single camera in laboratory environment.