• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.7
• /
• pp.741-749
• /
• 2014

This paper proposes a machine vision module for PLCs (Programmable Logic Controllers). PLC is the industrial controller most widely used in factory automation system. However most of the machine vision systems are based on PC (Personal Computer). The machine vision system embedded in PLC is required to reduce the cost and improve the convenience of implementation. In this paper, we newly propose a machine vision module based on PLC. The image processing libraries are implemented and integrated with the PLC programming tool. In order to interface the libraries with ladder programming, the ladder instruction set was also designed for each vision library. By use of the developed system, PLC users can implement vision systems easily by ladder programming. The developed system was applied to sample inspection system to verify the performance. The experimental results show that the proposed system can reduce the cost of installing as well as increase the ease-of-implementation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.1120-1123
• /
• 1995

In this paper, an automatic B/STUD inspection system has been developed using the computer aided vision system. Index Table has been used to get the rapid measurement and multi-camera has been used to get the high resolution in mechanical system. Camera calibration was suggested to perform the reliable Inspection. Image processing and data analysis algorithms for B/STUD inspection system has been investigated and were performed quickly with high accuracy. As a result, Inspection system of a B/STUD can be measured with a high resolution in real time.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.1
• /
• pp.82-88
• /
• 2005

The damage inspection of container surface is performed by the expert inspectors at the container terminal gate of harbor. In this paper, we substitute the expert's capability with the damage inspection system using the artificial intelligent control algorithm and vision system, so we can improve the work environment and effectively decrease the inspection time and cost. Firstly, using six CCD cameras attached to the terminal gate, whole container is partially captured according to eleven sensors aligned with the entering direction of container. Captured partial images are inspected by the fuzzy system which the expert's technology is embedded. Next, we compose partial images to be a complete container image through the correlation coefficient method. Complete container image is saved to solve future troublesome problems. In this paper, the effectiveness of the proposed system was verified through the field test.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.118.4-118
• /
• 2001

An Inspection system, composed of sensor head and controller, is presented which is a 3-D laser vision system using principles of optical triangulation for weld quality and chamfer quality. The sensor head id composed of laser diode, micro CCD camera, filter and several optical components. This systems can be used in welding bead and undercut inspection and chamfer quality inspection as well. It is mech more convenient to use and the inspection time is to be greatly shortened compared with conventional inspection method. Furthermore, data saved in controller can be used for statistics afterwards. This system has been begin used in Koje Shipyard of Samsung Heavy Industries and the need is being increased.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.1 no.1
• /
• pp.13-23
• /
• 2001

Most current machine vision systems for industrial inspection were developed with one specific task in mind. Hence, these systems are inflexible in the sense that they cannot easily be adapted to other applications. In this paper, a general vision system framework has been developed that can be easily adapted to a variety of industrial web inspection problems. The objective of this system is to automatically locate and identify \\\"defects\\\" on the surface of the material being inspected. This framework is designed to be robust, to be flexible, and to be as computationally simple as possible. To assure robustness this framework employs a combined strategy of top-down and bottom-up control, hierarchical defect models, and uncertain reasoning methods. To make this framework flexible, a modular Blackboard framework is employed. To minimize computational complexity the system incorporates a simple multi-thresholding segmentation scheme, a fuzzy logic focus of attention mechanism for scene analysis operations, and a partitioning if knowledge that allows concurrent parallel processing during recognition.cognition.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.2 no.2
• /
• pp.67-74
• /
• 2003

This paper presents the development of the Inspection machine for SMD mounted on cream solder of PCB. There are mounting errors of SMD such as misalignment, missing part, wrong orientation, wrong polarity and so on. The main hardware of the system consists of a machine vision part and a motion control part. Operating software has been developed in GUI environment to help user convenience. The Inspection Jobs consist of two procedures, that is, creation of the inspection reference data and automatic inspection. The Inspection reference data has a tree structure of linked list including PCB information, blocks, components, windows, and inspection methods. This paper presents versatile inspection methods which include a section length method, a projection method and histogram method. Therefore, user can choose the suitable procedure for various components. Finally, the automatic Inspection procedure using the reference data checks the mounting errors of components.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.5
• /
• pp.371-381
• /
• 2021

A machine vision inspection system consists of a camera, optics, illumination, and image acquisition system. Especially a scanning system has to be made to measure a large inspection area. Therefore, a machine vision line scan camera needs a line scan light source. A line scan light source should have a high light intensity and a uniform intensity distribution. In this paper, an offset calibration and slope calibration methods are introduced to obtain a uniform light intensity profile. Offset calibration method is to remove the deviation of light intensity among channels through adding intensity difference. Slope calibration is to remove variation of light intensity slope according to the control step among channels through multiplying slope difference. We can obtain an improved light intensity profile through applying offset and slope calibration simultaneously. The proposed method can help to obtain clearer image with a high precision in a machine vision inspection system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.12
• /
• pp.1109-1114
• /
• 2015

This paper presents an improved learning-based visual inspection method for auto parts inspection in severe lighting changes. Automobile sunroof frames are produced automatically by robots in most production lines. In the sunroof frame manufacturing process, there is a quality problem with some parts such as volts are missed. Instead of manual sampling inspection using some mechanical jig instruments, a learning-based machine vision system was proposed in the previous research[1]. But, in applying the actual sunroof frame production process, the inspection accuracy of the proposed vision system is much lowered because of severe illumination changes. In order to overcome this capricious environment, some selective feature vectors and cascade classifiers are used for each auto parts. And we are able to improve the inspection accuracy through the re-learning concept for the misclassified data. The effectiveness of the proposed visual inspection method is verified through sufficient experiments in a real sunroof production line.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.569-571
• /
• 2010

In this paper, we develop a vision inspection system for inspecting flaws on plastic products such as insufficient moldings, spots, scratches. The inspection algorithm for this system consist of image binarization for curved structure of plastic products, image noise removal using morphology operation, labeling methods for candidate regions and image filtering and calibration method for flaw inspection. In order to improve its performance, we also develop fast image processing algorithm based on GUI. To verify the effectiveness of this system, we conducted evaluation for the system accuracy and the inspection algorithm processing time.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3416-3422
• /
• 2014

A shock absorber rod is located in the center of the absorber piston and is responsible for the reciprocating movement portion. If it has surface defects, the damping performance of product will be adversely affected. A rod surface has gloss by heat treatment. Therefore, it is difficult to find a defect, such as dust, imprints, and blowholes. Because a total inspection is achieved by visual inspection by workers, it causes eyestrain and the quality of the product is not constant. In this paper, a machine vision system was developed to find a defect using a line-scan camera. The machine can detect surface defects than 0.3mm. To minimize the occurrence probability of defects on the inspection process, the developed auto inspection system had an automatic feeding system and incorporated a protection system. Through the development of this system, which relies on the operator's visual inspection of the surface of the shock absorber, the Rod inspection system constructed quality inspection standards and standardized tests to ensure improved reliability.