• 신재생에너지
• /
• 제19권3호
• /
• pp.13-21
• /
• 2023

Smart windows are capable of varying their visible light transmittance (VLT) in response to changing environmental conditions. The VLT variability of architectural windows is highly valuable because it enables indoor lighting and energy environments to align with external changes. However, challenges such as high installation costs and assurance of glass visibility have prompted the exploration of alternative solutions, including models incorporating partially applied smart windows., Prior research focused on useful daylight illuminance (UDI) analysis for south-facing office buildings, pointing out suitable areas for smart-window implementation to enhance lighting control. In this study, we broadened this scope by determining optimal smart-window application zones under changing building orientation. Furthermore, we studied the correlation between building orientation and smart-window deployment areas.

• Transactions on Electrical and Electronic Materials
• /
• 제17권3호
• /
• pp.168-171
• /
• 2016

There has been growing interest and rapid development in transparent electrode films, which are flexible and light and used in mobile, simple information, and electronic devices, and based on recent advancements in nano technology, information technology, and display technology. In particular, studies on developing such films with both high conductivity and high transmittance of visible rays are highly in demand for commercialization. In this study, transparent electrode films were developed for IT using micro patterns that show sheet resistance less than 10 Ω/□, adhesive strength more than 98%, and light transmittance more than 90%. The results of applying a surface emission gradient minimization (Honey Comb) technology to the films was the verification of the sheet resistance, adhesive strength, and light transmittance satisfying the target level of this study through Imprinting and Remolding processes.

• 한국세라믹학회지
• /
• 제32권1호
• /
• pp.57-62
• /
• 1995

The coating condition of reproducible anti-reflective coating film and the light transmittance characteristics of the prepared anti-reflective coating glass were investigated as a study for the preparation of single-layer anti-reflective coating glasss. In case of coating with the sol in which the solvent was substituted with the ethanol with the addition of 0.1 mol HNO3, the coated glass showed the minimum value of the refractive index of 1.464, light transmittance of 94.2% at 550nm standard wavelength which is 3.2% higher than that of the parent glass, and the reflectance in the entire wave range of visible light. The refractive index represented its minimum at the sol concentration of 1.0 mol per 100mols of water and the higher the sol concentration, the higher the refractive index, resulting in the decrease of the light transmitance. The production condition of the reproducible anti-reflective coating on glass with the maximum transmittance of 94.2% was 4cm/min of withdrawal speed, 40$0^{\circ}C$ and 1 hour of heat treatment temperature and time, resulting in the film thickness of 94nm.

• 한국안광학회지
• /
• 제19권2호
• /
• pp.179-188
• /
• 2014

목적: 본 연구에서는 계면활성성분 및 함유량이 다른 콘택트렌즈 관리용액의 세척효율 및 가시광선투과율에 미치는 영향을 알아보고자 하였다. 방법: 다른 재질의 소프트렌즈(etafilcon A 및 hilafilcon B 재질)에 인공누액을 이용하여 각각 단백질을 침착시킨 후 계면활성성분 및 함유량이 다른 6종류의 다목적용액을 사용하여 세척한 후 그에 따른 세척효율 및 광투과율을 비교하였다. 결과: Etafilcon A 재질 렌즈의 경우 다목적용액으로 문지르기를 하여 세척하였을 때 세척효율은 다목적용액의 계면활성성분 농도와 표면장력에 따라 약 23~43%로 다양하게 나타났으며, 계면활성성분 이외에 과산화수소를 함유하는 다목적용액으로 세척 시 가장 높은 세척효율을 보였으나 렌즈에 잔존하는 단백질량이 많았다. 다목적용액으로 세척 후 가시광선투과율은 89.8%~90.8%으로 나타났다. Hilafilcon B 재질 렌즈에서는 인공누액에 7일간 배양하더라도 침착되는 단백질양이 매우 적어 etafilcon A 재질 렌즈의 5~10% 수준의 단백질량을 보였으며 가시광선투과율 감소도 크지 않았다. 다목적용액으로 문질러 세척하였을 경우 45.4~67.4%의 세척효율을 보였으나 etafilcon A 재질 렌즈와는 다른 세척효율 순서를 보였으며, 광투과율은 새 렌즈 수준으로 회복되었다. 결론: 이상의 결과로 소프트렌즈의 단백질 침전물의 올바른 관리를 위하여서는 다목적용액의 계면활성성분이나 원리에 대한 이해를 바탕으로 렌즈 재질과 침착된 단백질량에 따라 적절한 다목적용액을 선택하여야 하며, 제조사의 가이드라인과 상관없이 문지르기를 하여 관리하는 것이 보다 효율적임을 알 수 있었다.

• 한국안광학회지
• /
• 제18권2호
• /
• pp.107-115
• /
• 2013

목적: 본 연구에서는 눈 화장품인 아이라이너에 노출시킨 소프트 콘택트렌즈의 파라미터가 어떻게 변하는가를 알아보고, 세척방법을 달리하여 세척하였을 때의 세척효과와 렌즈 파라미터의 회복정도를 비교하고자 하였다. 방법: 서로 다른 재질로 제조된 3종류의 소프트 콘택트렌즈에 각각 1시간, 4시간 및 6시간 동안 아이라이너를 침착시킨 후 안경용 초음파 세척 및 손 세척을 시행하였으며, 세척 전후 렌즈의 가시광선 투과도, 직경 및 표면의 변화를 비교하였다. 결과: 소프트 콘택트렌즈의 가시광선 투과도는 아이라이너의 침착시간이 길어질수록 감소하였다. 렌즈의 표면을 관찰한 결과 아이라이너의 침착 양상은 렌즈재질의 물성에 따라 다르게 나타나 narafilcon A 재질 렌즈에서 가장 침착이 큼을 알 수 있었다. 렌즈 직경은 hilafilcon B 및 etafilcon A 재질 렌즈는 감소하였으나, narafilcon A재질 렌즈는 증가하는 것으로 나타났다. 이러한 아이라이너의 침착은 안경용 초음파 세척기를 이용한 세척보다는 다목적 용액을 이용한 손 세척 시 세척효율이 우수한 것으로 나타났으나 렌즈의 직경이나 가시광선 투과도, 렌즈표면 등 렌즈 파라미터가 원래 상태로 회복되는 데에는 한계가 있었다. 결론: 이상의 결과로 소프트렌즈를 착용한 상태에서 눈 화장 하는 것을 최소화하는 것이 옳으며, 반복적으로 눈 화장을 할 때에는 렌즈 파라미터의 변화를 고려한 착용시간의 단축이나 빠른 렌즈의 교체주기가 필요하다고 사료된다.

• 한국정밀공학회지
• /
• 제30권3호
• /
• pp.340-348
• /
• 2013

In Projection Stereolithography Apparatus (PSLA), Digital Micromirror Device (DMD) and Liquid Crystal Display (LCD) are used as a beam pattern generator. The DMD shows high resolution, but it is mostly applied in micro stereolithography due to high cost and fabricable area. In LCD, the size of pattern beam is freely controlled due to various panel sizes. The LCD, however, has some limitations such as short life time by the high power light source, non-uniform light intensity of pattern beam and low transmittance of UV-light. To solve these problems in LCD-based PSLA, a Scanbeam-SLA with LCD of 19 inches and visible LED-array is developed. In this system, the light module works like a scanner for uniform illumination. The system configuration, working principle and fabrication examples are addressed in this study.

• Current Photovoltaic Research
• /
• 제10권1호
• /
• pp.28-32
• /
• 2022

We investigated the optical and electrical characteristics of ITO/Ag/ITO (IAI) 3-layer thin films prepared by using RF/DC sputtering. To measure the thickness of all thin film samples, we used scanning electron microscopy. As a function of Ag thickness we characterized the optical transmittance and sheet resistance of the IAI samples by using UV-Visible spectroscopy and Hall measurement system, respectively. While the thickness of both ITO thin films in the 3-layered IAI samples were fixed at 50 nm, we varied Ag layer thickness in the range of 0 nm to 11 nm. The optical transmittance and sheet resistance of the 3-layered IAI thin films were found to vary strongly with the thickness of Ag film in the ITO (50 nm)/Ag(t₀)/ITO (50 nm) thin film. For the best transparent conducting oxide (TCO) electrode, we obtained a 3-layered ITO (50 nm)/Ag (t₀ = 8.5 nm)/ITO (50 nm) that showed an avrage optical transmittance, AVT = 90.12% in the visible light region of 380 nm to 780 nm and the sheet resistance, R_□ = 7.24 Ω/□.

• Transactions on Electrical and Electronic Materials
• /
• 제6권4호
• /
• pp.140-143
• /
• 2005

Carbon Nanotube(CNTs) counter electrode is a promising alternative to Platinum counter electrode for dye sensitized solar cells (DSSCs). In this study, CNT counter electrodes having different visible light transmittance were prepared on fluorine-doped tin oxide (FTO) glass surface by spray coating method. Microstructural images show that there are CNT-tangled region coated on FTO glass counter electrodes. Using such CNT counter electrodes and screen printed $TiO_2$ electrodes, DSSCs were assembled and its I-V characteristics have been studied and compared. Light energy conversion efficiency of DSSCs increased with decreasing in light transmittance of CNT counter electrode. Efficiency of DSSCs having CNT counter electrode is compatible to that of Pt counter electrode.

• 반도체디스플레이기술학회지
• /
• 제8권3호
• /
• pp.57-60
• /
• 2009

Transparent electrode ZnO:Al(AZO)films were deposited on a PES (polyethersulfone) polymer substrate for thin film solar cells applications. A PES substrate with a thickness of 0.2mm and transmittance > 90% in the visible range was used because it is light weight and can deform easily. AZO thin films were prepared at a fixed DC power, $PO_2\;=\;P(O_2)/[P(O_2)\;+\;P(Ar)]$, and various substrate temperatures. The properties of AZO thin films were examined by X-ray diffraction, UV/VIS spectroscopy, four-point probe, Hall measurements, and field emission scanning electron microscopy. The lowest resistivity of all the films was $4.493\;{\times}\;10^{-4}\;[\Omega-cm]$ and the transmittance was > 80% in the visible range.

• The Journal of Advanced Prosthodontics
• /
• 제5권4호
• /
• pp.464-470
• /
• 2013

PURPOSE. The aim of this Fourier transform infrared (FTIR) spectroscopic study was to measure the degree of conversion (DC) of dual-cured resin cements light-irradiated through zirconia ceramic disks with different thicknesses using various light-curing methods. MATERIALS AND METHODS. Zirconia ceramic disks (KT12) with three different thicknesses (1.0, 2.0, and 4.0 mm) were prepared. The light transmittance of the disks was measured using ultraviolet visible near-infrared spectroscopy. Four different light-curing protocols were used by combining two curing light modes (Elipar TriLight (standard mode) and bluephase G2 (high power mode)) with light-exposure times of 40 and 120 seconds. The DCs of the two dual-cured resin cements (Duo-Link and Panavia F2.0) light-irradiated through the disks was analyzed at three time intervals (3, 7, and 10 minutes) by FTIR spectroscopy. The data was analyzed using repeated measures ANOVA (${\alpha}$=.05).Two-way ANOVA and Tukey post hoc test were used to analyze the 10 minute DC results. RESULTS. The 1.0 mm thick disk exhibited low light transmittance (<25%), and the transmittance decreased considerably with increasing disk thickness. All groups exhibited significantly higher 10 minute DC values than the 3 or 7 minute values (P<.05), but some exceptions were observed in Duo-Link. Two-way ANOVA revealed that the influence of the zirconia disk thickness on the 10 minute DC was dependent on the light-curing methods (P<.001). This finding was still valid even at 4.0 mm thickness, where substantial light attenuation took place. CONCLUSION. The curing of the dual-cured resin cements was affected significantly by the light-curing technique, even though the additional chemical polymerization mechanism worked effectively.