• Aerospace Engineering and Technology
• /
• v.9 no.2
• /
• pp.44-50
• /
• 2010

COMS accommodates multiple payloads; Meteorological Image(MI), Ocean Color Imager(GOCI) and Ka-band communication payloads. In order to improve the quality of MI visible channel, the moon image has been taken into account as backup reference in addition to Albedo monitoring. However, obtaining the moon image by adding special mission schedule is not recommended after IOT, because we may miss chances to obtain meteorological images during the time slots for special imaging. As an alternative solution, an approach extracting moon image from MI FD(Full Disk) image has been proposed when the moon is positioned near to the earth. However, prediction of acquisition time of moon image is somewhat difficult as the moon moves while the MI is scanning type sensor. And the moon can not be seen when it is behind the earth or outside of FD field of view. This paper discusses how effectively the moon can be detected by the MI FD imaging. For that purpose, this paper describes an approach taken to predict the time when the moon image is achievable and then introduces the results obtained from computer simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.5
• /
• pp.1096-1101
• /
• 2004

The 3-D shape use to effect of movie, animation, industrial design, medical treatment service, education, engineering etc.... But it's not easy to make 3-D shape from the information of 2-D image. There are two methods in restoring 3-D video image through 2-D image; First the method of using a laser; Secondly the method of acquiring 3-D image through stereo vision. Instead of doing two methods with many difficulties, I figure out the method of simple 3-D image in this research paper. We present here a simple and efficient method, called direct calibration, which doesn't require any equations at all. The direct calibration procedure builds a lookup table(LUT) linking image and 3-D coordinates by a real 3-D triangulation system. The LUT is built by measuring the image coordinates of a grid of known 3-D points, and recording both image and world coordinates for each point; the depth values of all other visible points are obtained by interpolation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.390-392
• /
• 2005

The digital radiation detectors are used clinically by diagnostic apparatus. However the digital radiation detector are some problem like high operating voltage, light blurring, low conversion efficiency, low fill factor, etc. Thus we propose a new radiation detector that the photoconductor layer and liquid crystal layer are coupled in sandwich structure. X-ray absorption in the photoconductor layer controls the state of the liquid crystal via creation of charge carrier and the light modulation of liquid crystal make image formation. The advantage of the new radiation detector is that high resolution image is acquired and the signal amplification is possible by external visible light source. In this study, we study the optical properties and electrical properties of the new radiation detector to irradiate X-ray. The Mercury Iodide($HgI_2$) was used by photoconductor material, and the aluminum is used by reflective layer. The thickness of Mercury Iodide is about $200{\mu}m$, the operating voltage of the liquid crystal is 1.5~5V. The electrical properties of Mercury Iodide was measured, and the transmission efficiency of liquid crystal was measured by modulation potential.

• The Korean Journal of Franchise Management
• /
• v.12 no.3
• /
• pp.21-34
• /
• 2021

Purpose: As the visual expression cue that can easily reveal and imprint the brand image to consumers becomes more important, franchise coffee shops are making various efforts to establish design elements and brand identity. Therefore, the purpose of this study is to examine the structural model between design elements, brand identity, brand association, brand personality, and brand image of franchise coffee shops from various angles, and to suggest a plan for using visual elements makes a brand image on the franchise in the future. Research design, data, and methodology: This study tests the structural relationship between design elements, brand identity, brand association, brand personality, and brand image of franchise coffee shops. design elements are divided into three attributes (interior design, product design). And brand identity is divided into two attributes (brand name, brand symbol/logo). In order to achieve the purposes of this research, research model and hypotheses were developed based on previous researches. All constructs were measured with multiple items developed and tested in the previous studies. The data were collected from 380 customers who visited franchise coffee shops and were analyzed through SPSS 26.0 and SmartPLS 3.0 statistical package program. Result: As a result of this study, first, it is confirmed that product design has a positive effect on brand association toward coffee shops. Second, interior design and product design have a positive effect on brand personality. Third, all brand identity have a significant positive impact on brand association and brand personality. Finally, brand association and brand personality of coffee specialty shops have a positive effect on brand image. Conclusions: The following implications of this study are as follows. This study is confirmed that there is an effect of design elements attributes and brand identity attributes on brand association and brand personality. And, the brand image was found to be influenced by brand association and brand personality. This suggests that it can be used to establish visible marketing strategies for franchise coffee shops. Therefore, it is necessary to further improve efforts to raise the level of the brand image through visual factors such as unusual interior design, product packages.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.6
• /
• pp.773-778
• /
• 1993

A new approach is proposed for the DCT which is widely utilized in the image processing, The approach replaces mutiplications with shift and additions, In the image restored by the proposed DCT and IDCT, no visible degration is observed and PSNR(Peak to Peak Signal to Noise Ratio) is greater than 35 dB for all cases, proving the usefulness of the proposal.

• Journal of the Korean housing association
• /
• v.16 no.4
• /
• pp.57-64
• /
• 2005

The purpose of this paper is to find out and to show that the probability of the adaption of YURAGI theory of wall covering in interior design. By using personal computer, visible image of wall covering is inputted to a computer program as 'bmp' file, Windows bitmap file format, for Fourier transform. The evaluation indexes such as 'Map', 'YURAGI coefficient', 'Rest error', and 'Linearity' are defined to display the analytical result. The result of this study is shown by visual image and numerical value. As a result of this paper, we can understand that the psychological evaluations about wall coverings are different according to the YURAGI coefficient which came out by fluctuation analysis method as YURAGI theory. So, now we are able to know that the adaptation of YURAGI theory is very useful at psychological evaluation about wall covering.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.1 no.1
• /
• pp.55-60
• /
• 2009

Drag&Drop mechanism was formerly the clipboard of Microsoft Windows. Drag&Drop means that copy and paste functions using the clipboard are processed by a mouse event. The touch interface come info the spotlight not to speak of PCs, laptops and mobile phones. Mouse and touch interfaces make an environment to work easier and intuitive through visible interactions. In this paper, we implemented a web image collector to utilize Drag&Drop. And we proposed the how to apply and a utilizable plan from it.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.1
• /
• pp.420-427
• /
• 2017

This paper proposes a new method using Wide Line Detector based statistical shape Feature (WLDF) to identify whether or not a tongue is cracked; a cracked tongue is one of the most frequently used visible features for diagnosis in traditional Chinese Medicine (TCM). We first detected a wide line in the tongue image, and then extracted WLDF, such as the maximum length of each detected region, and the ratio between maximum length and the area of the detected region. We trained a binary support vector machine (SVM) based on the WLDF to build a classifier for cracked tongues. We conducted an experiment based on our proposed scheme, using 196 samples of cracked tongues and 245 samples of non-cracked tongues. The results of the experiment indicate that the recognition accuracy of the proposed method is greater than 95%. In addition, we provide an analysis of the results of this experiment with different parameters, demonstrating the feasibility and effectiveness of the proposed scheme.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1553-1558
• /
• 2007

This paper presents a vision based autonomous inspection system for welding quality control of car sinking seat. In order to overcome the precision error that arises from a visible inspection by operator in the manufacturing process of a car sinking seat, this paper proposes the MVWQC (machine vision based welding quality control) system. This system consists of the CMOS camera and NI machine vision system. The image processing software for the system has been developed using the NI vision builder system. The geometry of welding bead, which is the welding quality criteria, is measured by using the captured image with median filter applied on it. Experiments have been performed to verify the proposed MVWQC of car sinking seat.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.4 no.4
• /
• pp.34-38
• /
• 2005

This is a widespread requirement for low cost lightweight thermal imaging sensors for both military and civilian applications. Today, a large number of uncooled infrared detector developments are under progress due to the availability of silicon technology that enables realization of low cost IR sensor. System prices are continuing to drop, and swelling production volume will soon drive process substantially lower. The feasibility of micromechanical optical and infrared (IR) detection using microcantilevers is demonstrated. Microcantilevers provide a simple Structurefor developing single- and multi-element sensors for visible and infrared radiation that are smaller, more sensitive and lower in cost than quantum or thermal detectors. Microcantilevers coated with a heat absorbing layer undergo bending due to the differential stress originating from the bimetallic effect. This paper reports a micromachined silicon uncooled thermal imager intended for applications in automated process control. This paper presents the design, fabrication, and the behavior of cantilever for thermomechanical sensing.