• 한국실내디자인학회논문집
• /
• 제18권4호
• /
• pp.97-104
• /
• 2009

This thesis analyzed arrangement and mixture method of function elements, which are getting more important in museum planning. It used quantitative method, Space Syntax and Visibility Graph Analysis tool to analyze five case museums. Through this analysis, advantages and disadvantages of two methods were derived and case museums' arrangement and mixture attributes were grasped. Results of the analysis were derived differently by two kinds of plan form which were room to room type and open type. Open typed museum recorded similar graphs of Integration, Visual Integration and Visual Connectivity. Since whole space structures were relatively simple and structure of exhibition halls were opened, the results of Space Syntax and Visibility Graph Analysis had similar graphs. Room to room typed museum showed differences in Integration, Visual Integration and Visual Connectivity. In the result, the most accessible space was lobby and Mediation Space became the center of visibility. Also, the exhibition hall, where the opening of room to room typed exhibition hall was penetrated visually, became a center of visibility. Lobby space, which was close to entrance, had the highest Visibility Connectivity. As Space Syntax could analyze the museum as whole space structure, Space Syntax showed strength in room to room typed museum analysis compared to open typed museum analysis which has relatively simple structure. Visibility Graph Analysis could expect the flow of exhibit distance including visibility analysis unlike the flow of exhibit distance with space arrangement. The exhibition hall, which secures the sight to penetration of an opening, couldn't be analyzed in existing Space Syntax. However, it became the biggest advantages in Visibility Graph Analysis of room to room typed museum. Visibility Graph Analysis derived detailed results in exhibit arrangement so it will be the useful method not only for architecture but also for planning of exhibit arrangement in open typed museum. Through this study, various possibilities on Quantitative Analysis Method of Museum Architecture could be verified. However, the analysis still has limitation of second dimension. Therefore, diverse and liberal following study will be expected to accomplish.

• 한국조경학회지
• /
• 제25권2호
• /
• pp.31-42
• /
• 1997

Visibility has been used for Visual Impact Assessment and Buildingheight Control. The purpose of this study is to elaborate visibility analysis technique in GIS, and to design a visual information system baed on this technique for diverse application. The results of this study are as follows : 1) By classifying visibility analysis techniques into two groups, Each one's merits and demerits were investigated. Practically GIS visibility analysis by DTM model using contour map and investigating it by means of site-observation can be the most effective method. 2) A visibility analysis techniquwe for V.I.A. and B.H.C. was presented by studying GIS visibility analysis by means of DTM model using contour map. There were 5 problems. 3) Adequate analysis techniques were presented according to the landscape factor-road, ship-route, port, mountain, etc. 4) Viewing distance from road and ship-route in visual corridor, landma가 visibility and distance, the angle of incidence and invisible region's depth are helpful for land scape management or land use planning.

• 대한건축학회연합논문집
• /
• 제20권6호
• /
• pp.71-80
• /
• 2018

The path and visibility of nurses in general hospital wards have been treated as architectural planning factors. However, the analysis approach of existing studies shows limitations that only fixed physical elements are considered without considering the behavior of users using space. Consider factors for analysis of ward and models based on this study model. Select a case hospital to apply the analysis technique and conduct the nurse questionnaire and route survey of the hospital. Establish a framework for analysis model applied with the path of nurse movements. The analysis model applies to the case hospital. The analysis results are aggregated to derive design suggestion for reference to the spatial improvement of the ward. Visible visibility to observe the bedside in the nursing station, visibility to observe the beds in the nurse's path, and visibility to observe patients moving in the nurse's path were derived from visual access frequency and exposure frequency. The survey of nurses' movements at the site allowed the nurses to calculate the distance required to move. Reflecting the path of nurse movement, a model was presented for a comprehensive analysis of nursing distance and nursing visibility, which could lead to improvement in the observation and visibility of nurses and the layout of patient rooms or day rooms.

• 한국환경과학회지
• /
• 제9권5호
• /
• pp.385-388
• /
• 2000

Visibility reduction is a barometer of air pollution which people can notice easily. First of all we need to measure quantified visibility continuously in order to examine visibility reduction. Prevailing visibility is not practical to measure visibility depending on observer's expertness. Scattering visibility using Forward Scattering Meter(Belfort Visibility Sensor 6230) has been measured at Kwangan-Dong in Pusan and analysed since July 1998. According to the analysis the correlation coefficient(R) between prevailing visibility and scattering visibility was 0.7235. The visibility appeared that each frequency of poor visibility(under 6km) and good visibility(over 25km) was 10.6%, 9.7% on summertime in Pusan and the visibility range from 10km to 20km ranked high frequency as a half of whole ranges. The order of correlation coefficients between visibility an air pollutants are ranking CO. PM10 and NO2 that values are 0.5878, 0.5369,l 0.5284 respectively. In meteorolgical factor the case of poor visibility presented more weakly wind speed and higher relative humidity than the case of good visibility. The correlation coefficient between calculated visibility of multiple linear regression model and observed visibility was 0.7215. But the trend of calculated and observed visibility variation was similar with the exception of several good visibility cases.

• 대한건축학회연합논문집
• /
• 제21권3호
• /
• pp.11-21
• /
• 2019

The purpose of this study was to present an analysis model for finding the correlation between visibility and evacuation time as users move in the outpatient department of the general hospital. The spatial scope of the study was limited to the first floor and second floor which are used for the outpatient department. Traffic density in outpatient departments was surveyed on site. Based on the surveyed traffic density, the evacuation simulation model was established for calculating the escape route and evacuation time for an individual user. The traffic density of the outpatient department as per the evacuation time was also calculated. With using evacuation simulations, the flow of evacuees was calculated through the density of traffic over the time of evacuation. Visibility data were set in the simulation model for users' escape routes. A correlation analysis between the product of evacuation flow measure and visibility measure of the evacuation population and evacuation time was performed. The analysis result showed negative correlation within a specific distance range. This study presented an analysis model showing that the evacuation condition considering spatial visibility in the outpatient department of general hospital visibility was negatively related to the analyzed evacuation time at the design stage.

• 한국대기환경학회지
• /
• 제14권3호
• /
• pp.229-236
• /
• 1998

Visibility is a good indicator of comprehensive alto quality. The prevailing visibility in Seoul is no better than the past although the average concentration of SO2 and TSP (total suspended particulate) has decreased quite significantly in the past decade, owing to the government efforts to reduce the emission. Then, a question arises why visibility has not been improved. In order to answer this question we have investigated which components of air pollutants are most responsible for the visibility degradation in Seoul. Analysis on the visibility vs the aerosol sixte distribution measured by an optical particle counter shows that the particles of the size interval between 0.5mm and 2.5mm are most responsible for the visibility degradation. Among the criteria air Pollutants, NOB concentration is found to be moot responsible, rather than PM10. ton analysis of the particulate collected by a high volume sampler shows that the nitrate component increases more significantly than other ions when visibility becomes very poor. Therefore, we conclude that the major causes of visibility degradation in Seoul are the increase of NOB, nitrates and the particles of the size range between 0.5mm and 2.5mm.

• 한국전통조경학회지
• /
• 제29권4호
• /
• pp.78-86
• /
• 2011

산성의 복원과정에서 조망 확보를 위해 산림경관에 대한 정비가 요구된다. 본 연구에서 산성에 대한 조망 확보를 위한 산림경관 관리방안이 제시되었다. 관리방안의 검증을 위해 GIS를 이용한 시곡면과 누적가시도 분석이 이용되었다. 경주 명활산성에 대해 경관 분석과 산림정비계획 수립, 수목 제거사업 등의 결과가 비교되었다. 연구결과는 다음과 같다. 첫째, 외부의 주요 조망점에서 명활산성에 대한 누적가시도 분석을 시행하였다. 분석결과를 활용하여 산성에서 우수가시구간의 선정이 가능하였다. 6개의 우수가시구간은 총 길이가 1,937m(전체 구간의 41.2%)이다. 둘째, 우수가 시구간에 대해 수목의 평균높이와 우점종인 소나무의 최대 성장높이를 반영한 시곡면 분석을 비교하였다. 비교결과, 수목의 평균높이를 반영하는 것이 최대 성장높이를 반영한 것보다 식생에 대한 훼손을 최소화하면서 산성의 가시성을 확보하는데 효과가 있을 것으로 판단되었다. 셋째, 도출된 정비구역 중에서 가시빈도가 높은 A구역이 타당성 검토를 위해 선정되었다. 주요 조망점에서의 가시 여부를 검토하면서 A구역에 대한 수목 제거작업이 수행되었다. 비교결과, 정비계획($10,935m^2$)과 제거지역($11,296m^2$)은 미미한 차이(3.3%)가 발생하였다. 이를 통해 산성 주변의 산림경관 정비를 위한 누적가시도와 시곡면 분석법의 효용성이 검증되었다.

• 한국대기환경학회지
• /
• 제12권4호
• /
• pp.377-387
• /
• 1996

This study was carried out to monitor the visibility including measurement and analysis of the various parameters such as particle size distribution, chemical composition, and meteorotical conditions to understand the characteristics and causes of this phenomenon. According to the analysis of intensive sampling, $SO_4^{2-}, NO-3^-, Cl^-, NH_4^+$ ion concentration increased together with the mass concentration around 1 $\mu$m in the case of low visibility. $(NH_4)_2SO_4, NH_4NO_3$, and $NH_4Cl$ were thought to be the major components of fine particles. The statistical analysis showed that the scattering effect of particle was 81.2%, the absorption effect was 14.9%. Therefore, these effects were the major factors to reduce the visibility. In conclusion, the visibility was reduced by the fine particle of sulfate (18.6%), nitrate (14.2%), organic carbon (10.8%), element carbon (25.8%), and residual (24.8%) during this study.

• 한국지형학회지
• /
• 제17권1호
• /
• pp.73-84
• /
• 2010

본 논문은 가시권 분석에서의 지형 요소의 효율성과 활용성에 대한 내용으로써 지형 요소별로 가시권 분석 결과를 비교하여 각 지형 요소와 가시권 분석간의 관련성을 분석한 연구이다. 이를 위해 본 연구에서는 peak, pass, pit, ridge, valley를 지형 요소로 선정하고 조망 지점에서 최대 가시 면적을 확보하는 문제를 가시권 문제로 정의하였다. 또한 다양한 지형적 요인을 고려하기 위해 산악 지역에서부터 평야 지역까지를 대상으로 하였다. 분석 결과는 다음과 같다. 첫째, 해발고도와 가시 면적과의 상관 관계는 낮게 나타났다. 이는 넓은 가시권 확보를 위해 고도가 높은 지점들을 우선적으로 선정하는 방법은 효과적이지 않다는 의미이다. 둘째, 넓은 가시 범위를 보이는 상위 지점들은 해발 고도의 편차가 적다는 점이다. 이는 넓은 가시 범위를 확보하기 위해서는 어느 정도의 해발 고도 지점을 대상으로 해야 한다는 의미이다. 셋째, 가시권 상위 지점들과의 가시권 비교 결과, 모든 연구 지역에 걸쳐 다섯 유형의 지형 요소가 최대 가시권 확보 면적과 유사한 결과를 나타내었다. 이 결과는 가시권 분석에서 지형적 요인의 중요성과 지형 요소의 기여방안에 대한 논의 토대가 될 수 있음을 의미한다. 또한 본 연구의 결과는 향후 최대 가시권 분석에 있어 가시권에 영향을 주는 요인 및 변수 선정에 기여할 것으로 기대할 수 있다.

• 한국조경학회지
• /
• 제26권3호
• /
• pp.78-78
• /
• 1998

The purpose of this research is to develop a CAD-based program for data analysis of digital elevation model(DEM) on the aspect of landscape assessment. When handling DEM data as a visual simulation of topographic landscape, it is basic interest to analyze visible area and visualize visual sensitivity distributions. In reference with landscape assessment, more intuitive and interactive visualizing tools are needed, specially in area of visual approach. For adaptability to landscape assessment, algorithmic approaches to visibility analysis and concepts for visual sensitivity calculation in this study were based on processing techniques of entity data control functions used in AutoCAD drawing database. Also, for the purpose of quantitative analysis, grid-type 3DFACE entities were adopted as mesh unit of DEM structure. Developed programs are composed of main part named VSI written in AutoLISP and two of interface modules written in dialog control language(DCL0 for user-oriented interactive usage. Definitions of camera points(view points) and target points(or observed area) are available alternatively in combined methods of representing scenic landscape, scenery, and sequential landscape. In the case of scene landscape(single camera to fixed target point), only visibility analysis in available. And total visibility, frequency of cumulative visibility, and visual sensitivity analysis are available in other cases. Visual sensitivity was thought as view angle(3 dimensional observed visual area) and the strengths were classified in user defined level referring to statistical characteristics of distribution. Visibility analysis routine of the VSI was proved to be more effective in the accuracy and time comparing with similar modules of existing AutoCAD third utility.