• Korean Journal of Food Science and Technology
• /
• v.33 no.2
• /
• pp.195-199
• /
• 2001

A study was carried out to establish a detection method for irradiated black pepper using amylograph characteristics. The maximum viscosity, viscosity at $93^{\circ}C$, viscosity after 15 min at $93^{\circ}C$, viscosity at $45^{\circ}C$, viscosity after 30 min at $45^{\circ}C$, and viscosity after 60 min at $45^{\circ}C$ decreased with increasing irradiation doses, but initial pasting temperatures, maximum viscosity temperatures, breakdown, setback, and consistency did not show great changes. The high correlation coefficients $(R^2>0.97)$ were shown between irradiation doses and amylograph characteristics except for breakdown $(R^2>0.75)$, setback $(R^2>0.88)$ and consistency $(R^2>0.31)$. These results suggest that detection of irradiated black pepper is possible using amylograph characteristics.

• The Korean Journal of Food And Nutrition
• /
• v.12 no.2
• /
• pp.204-208
• /
• 1999

In order to obtain data for use of algin in drink making process solution properties of algin have been investigated at various condition of algin concentration temperature pH and various food additives. At same revolution velosity viscosities of algin were increased as algin concentration raised. Algin solution showed dilatnat type flow in concentration of 0.25% to 0.4% but pseudoplastic type flow in above 0.5% showed dilatant type flow in concentration of 0.25% to 0.4% but pseudoplastic type folw in above 0.5% A maximum viscosity of algin was observed at pH 5.5 and its viscosities were also decreased as the tem-perature increased and heating at 8$0^{\circ}C$ above. Organic acids affected on the viscosity of algin with pH dependently and gel formed in pH below 3.0 Sweetners have no effect to the viscosity of algin. How-ever addition of NaCl and KCL upto 1.0% decreased a little its viscosity and CACl2 MgCl2 and FeCl3 increased the viscosity of algin Glutamic acid decreased the viscosity of algin.

• Food Science of Animal Resources
• /
• v.21 no.1
• /
• pp.32-37
• /
• 2001

The study investigated the effects of protein concentration, EGTA and strength of hydrostatic pressure on pH, viscosity and turbidity for ultra filtrated skim milk retentates. The results showed that hydrostatic pressure treatments up to 600 MPa did not affect the viscosity of skim milk, while the turbidity of skim milk increased at higher than 200 MPa. Addition of EGTA caused reduction in turbidity of skim milk, two times (2SR) and three times (3SR) concentrated skim milk retentates. Viscosity for 2SR and 3SR increased proportionally to the amount of EGTA, but viscosity of skim milk was not influenced by EGTA. High pressure treatment also did not cause any difference in viscosity and turbidity of skim milk. However, this treatment decreased viscosity and turbidity for 2SR and 3SR. In particular, 200 MPa treatment showed to induce a higher decrease in turbidity compared with 400 MPa.

• Food Science and Biotechnology
• /
• v.17 no.1
• /
• pp.80-84
• /
• 2008

The effect of gellan (GE), xanthan (XA), and $\lambda$-carrageenan (LC) on the viscosity, sedimentation, ellagic acid content, and turbidity of grape 'Campbell Early' juice (CEJ) was investigated. CEJ samples with 0.15% each of GE, XA, and LC were tested for the above variables after 0, 5, 10, and 20 days of storage. The samples containing GE (0.15%) showed the least amount of sediment formation, the lowest ellagic acid content and turbidity, and a rise in viscosity. Sedimentation in CEJ decreased with increased viscosity due to the addition of gums which also limited the ellagic acid content and turbidity. GE was the most effective additive for the stabilization of CEJ.

• Journal of Dairy Science and Biotechnology
• /
• v.24 no.1
• /
• pp.65-73
• /
• 2006

This study was to review recent reports in effects of various starter cultures on the viscosity in stirred yogurt. The rheological properties of yogurt have received considerable attention in the literature. Most yogurts are typically made by mixed cultures of Lactobacillus bulgaricus and Streptococcus thermophilus. The viscosity of yogurt made by mixed cultures was much higher than that of yogurt by single cultures. Since texture of stirred yogurt is the result of both acid aggregation of casein micelles and production of exopoly-saccharides, it is suggested that yogurt be made by the exopolysaccharide-producing cultures in order to increase viscosity, Both types of exopolysaccharides are capsule and loose slime(ropy). But it is desirable to use encapsulated nonropy strains. And Bifidobacteria affects adversely to the viscosity of yogurt. Therefore, starter cultures which have an effect on yogurt viscosity have been widely demonstrated. This review is the search for the development of viscosity in stirred yogurt.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.5
• /
• pp.881-889
• /
• 1998

For the application of the commercially modified starch in frozen and retort foods, apparent viscosity and water loss were measured at each stages of heating, sterilization and freezing-thawing stages. Apparent viscosity showed the exponential increase with concentration and the slopes of apparent viscosity against concentration in the Firm-Tex(hydroxypropyl distarch phosphate), Hi-Flo(acetylated distarch adipate) and Colflo 67(acetylated distarch adipate) from waxy maize starch were higher than those of Amyloacetate M20(starch acetate) and X-amylo 250(distarch phosphare) from potato starch. In the presence of 1 or 2% NaCl, X-amylo 250 among modified starches showed the increase in water loss and the decrease in apparent viscosity, whereas Colflo 67, Hi-Flo and Firm-Tex were little affected by NaCl. In the presence of 1 or 2% sucrose, water loss and apparent viscosity of the modified starches were not affected. In the range of pH 4~8, water loss and apparent viscosity of the modified starches had no change but the differences were detected to some extent between each of heating, sterilization and freezing-thawing stages. In the apparent viscosity and water loss of the modified starches after 3 week storage from heating and sterilization, Hi-Flo, Amyloacetate M20 and X-amylo 250 were not changed at the storage period, and the overall acceptability of retort food containing the modified starches such as Firm-Tex and Amyloacetate M20 were favored more than others. In the apparent viscosity and water loss of the modified starches which have been frozen and thawed three times repeatedly, Colflo 67, Hi-Flo and Firm-Tex were not changed in freezingthawing, and the overall acceptability of frozen food containing Firm-Tex was most favored.

• Journal of the Korean Society of Food Culture
• /
• v.24 no.4
• /
• pp.419-425
• /
• 2009

This study examined the effects of added amounts of shrimp powder on the physical and sensory properties of Jook for elderly foodservice operation. According to the amylograph data, the composite shrimp flour-wheat flour samples increased the gelatinization temperature, with increasing shrimp-flour content; moreover, initial viscosity at $95^{\circ}C$, viscosity at $95^{\circ}C$ after 15 minutes, and maximum viscosity were reduced. As the level of shrimp powder in samples increased, L-values decreased, and a-values and b-values increased. In addition, the Jook had higher viscosity and lower spreadability values as the amount of shrimp powder increased. Sensory characteristics, such as nutty taste, color, viscosity, and overall preference increased significantly with the addition of shrimp powder. In conclusion, to enhance the quality of Jook, a 3% addition of shrimp powder would be the most beneficial.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.5
• /
• pp.509-512
• /
• 1991

Rheological property and apparent viscosity(η)of several semi-solid foods were measured with extrusion capillary viscometer. Apparent viscosities of several semi-solid foods ranged from 0.2714 Pa.s to 2.6453 Pa.s Rheological property of spread type semi-solid foods was pseudoplastic (with yield value). Especially, as the moisture content and temperature of Chungkook-jang spread increased, apparent viscosity decreased. On the contrary, as the added soybean oil content of Chungkook-jang spread increased, apparent viscosity also increased.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.9
• /
• pp.1407-1413
• /
• 2015

The objective of this study was to investigate the rheological and pasting properties of potato flour dispersions at different concentrations (3, 4, 5, 6, and 7%, w/w). A potato cultivar 'Goun', used in this study, was developed by Highland Agriculture Research Center, RDA. Potato flour dispersions showed shear-thinning behaviors (n=0.44~0.51) at $25^{\circ}C$. Apparent viscosity (${\eta}_{a,100}$), consistency index (K), and yield stress (${\sigma}_{oc}$) significantly increased with an increase in potato flour concentration. Storage modulus (G') and loss modulus (G") significantly increased, whereas complex viscosity (${\eta}^*$) was significantly reduced with increasing frequency (${\omega}$) from 0.63 to 63.8 rad/s. Magnitudes of G' and G" were significantly increased with elevation of potato flour concentration. G' values were considerably greater than G" over the entire range of frequency (${\omega}$) with a high dependence on ${\omega}$. Cox-Merz rule was not applicable to potato flour dispersions. Rapid Visco Analyzer data showed that peak viscosity, trough viscosity, breakdown viscosity, final viscosity, and set back viscosity of samples significantly increased with an increase in potato flour concentration.

• Food Science and Biotechnology
• /
• v.16 no.5
• /
• pp.783-788
• /
• 2007

An advantage to the extrusion of raw potatoes is a reduction in the energy input required to process potato products; however, the effects of extrusion on the properties of raw potato have not been studied. The purposes of this study were to develop a workable extrusion process for raw potato and to study the effects of extrusion conditions on the pasting properties of extruded potato products. The peak viscosity, final viscosity, pasting temperature, water solubility index, and water absorption index of pressed and pressed-dried potato extrudates decreased as die exit temperature increased, whereas they did not change as screw speed increased. The peak viscosity, final viscosity, and water solubility of steam-cooked potato products decreased with extrusion processing; however, they did not change with increasing die exit temperature and screw speed. Potato products with different degrees of depolymerization of extruded potato starch, depending on die exit temperature, were produced from raw potatoes.