• Restorative Dentistry and Endodontics
• /
• v.28 no.3
• /
• pp.209-221
• /
• 2003

The objectiveness of this study was to evaluate whether low-viscosity composite can bond effectively to dentin surface without bonding resin. The low-viscosity composites being 50wt% filler content were made by the inclusion of bonding resin of two self-etching systems(Cleafil SE Bond, Unifil Bond) varied with contents as 0, 10, 20, 30, 40, 50wt%. Exposed dentin surfaces of extracted 3rd molars are used. Dentin bond strengths were measured. The tests were carried out with a micro-shear device placed testing machine at a CHS of 1mm/min after a low-viscosity composite was filled into an iris cut from micro tygon tubing with internal diameter approximately 0.8mm and height of 1.0mm. 1 Flexural strength and modulus was increased with the addition of bonding resin. 2. Micro-shear bond strength to dentin was improved according to content of bonding resin irrespective of applying or not bonding resin in bonding procedure, and that of Clearfil SE Bond groups was higher than Unifil Bond. 3. There were no significant difference whether use of each bonding resin in bonding procedure for S-40, S-50, U-50(p＞0.05). 4. In SEM examination, resin was well infiltrated into dentin after primed with self-etching primer only for S-50 and U-50 in spite of the formation of thinner hybrid layer. Low viscosity composite including some functional monomer may be used as dentin bonding resin without an intermediary bonding agent. It makes a simplified bonding procedure and foresees the possibility of self-adhesive restorative material.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.664-675
• /
• 2010

Recently environment-friendly construction method is major trend in both domestic and world constrction fields. In this paper High Functional Performance Agent(Hi-FA) which has various improved engineering characteristics different with conventional Portland cement grouting, such as high viscosity, liquidity, void filling ability, early hardening, and separation resistance, was analyzed by field and laboratory test. Also soil improvement and existing deep foundation protection works were performed and analyzed using Hi-FA.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.497-502
• /
• 2001

We examined the silicate-based material to develop the surface-treatment agent, which would be used to restore performance of the deteriorated concrete and to inhibit corrosion of the reinforcing bar. As a part of the study, we carried out experiments of the penetration and strengthening properties of concrete treated by the considering agent. The variables of experiment, were the type of silicates, the ratio of distilled water-silicate, the usage of surface-strengthening material, and the usage of biochemical material. The penetrating ability of concrete is assessed by viscosity and surface tension. Also assessments of strengthening effects of concrete are performed on compressive strength, absorption, and water permeability tests.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10b
• /
• pp.1242-1247
• /
• 2000

Results from a study on the effect of the chemical agent on the flowing and setting properties of high flowing.high strength concrete using blast-furnace slag are presented in this paper. The flowing and setting properties of concrete are investigated by slump, slump-flow, flowing velocity, L-flow, velocity of V-funnel, L-spatial passability and setting time. In addition, kinds of chemical agent were composed of naphthalene type, of naphthalene and melamine and melamine type. The results indicate that dispersive capacity can be increased by naphthalene composition. Also, it shows that viscosity and early strength can be increased by melamine composition.

• Elastomers and Composites
• /
• v.50 no.3
• /
• pp.159-166
• /
• 2015

Silica which is used for reinforcing filler in tire industry is widely known as eco-friendly material exerting $CO_2$ reduction effect through decrease of rolling resistance and improvement of wet grip. Generally silica is classified as a highly polar filler because it contains a large number of silanol (Si-OH) group on its surface. And also silica gives a lower reinforcing effect than carbon black due to its poorer rubber-filler interaction. Therefore silica is treated with silane coupling agent or activator, then following the conventional rubber blend method, vulcanized sheets were prepared using a hot press, and cure characteristics, mechanical properties and abrasion resistance of the test specimens were investigated. It was found that with an increase in the silane coupling agent content the tensile strength, 300% modulus and abrasion resistance increased while Mooney viscosity decreased and crosslink density slightly increased with an increase of activator.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.2
• /
• pp.213-218
• /
• 2013

In this study, epoxy/mica composite was prepared by mixing with mechanical stirrer together with homogenizer, and the effect of amino-type silane coupling agent was also studied. To reduce the viscosity without any decrement of other properties, 1,4-Butanediol diglycidyl ether (1,4-BDGE) as an aliphatic epoxy reactive diluent was introduced to the epoxy/mica composite in order to use as vanish for high voltage motor and generator stator winding. It was confirmed by scanning electron microscopy (SEM) observation that interfacial characteristics between organic epoxy and inorganic mica was modified by coupling agent treatment so that glass transition temperature increased, and tensile strength and electrical breakdown strength increased. The properties were estimated by Weibull statistical analysis and the ac electrical breakdown strength was 20.2% modified by treating silane coupling agent.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.4
• /
• pp.122-129
• /
• 2012

In this study, environmental problems(i.e., pH elevation and $Cr^{6+}$ detection) occurred by using the cement grout made from CA(calcium aluminate) were evaluated using viscosity agents(MC, chelate polymer). Ordinary portland cement and blaste-furnace slag cement were used by main materials and ACC(blended mixture of calcium aluminate) were used by accelerator for hardening of grout. In addition, viscosity agents were used for preventing pH elevation and heavy metal detection from grouting materials. From the results, it was noted that when chelate polymer was used, pH elevation and $Cr^{6+}$ detection were minimized. However, other cases showed higher pH elevation and $Cr^{6+}$ detection. At test 1 day, $Cr^{6+}$ detection with age presented over 97% of total value and, after that, additional increase was not distinct. As a result of this study, it was acknowledged that, to control pH elevation and heavy-metal (like $Cr^{6+}$) detection, the usage of BSC and chelate polymer is a very useful fact.

• Korean Journal of Food Science and Technology
• /
• v.20 no.2
• /
• pp.148-156
• /
• 1988

A method for the measurement of viscoelastic properties of heat denatured gluten network was developed in order to evaluate the noodle making quality of wheat flour. The stress relaxation of elongated heat denatured gluten network could be expressed by 6-element generallized Maxwell model. The tensile force of heat denatured gluten network increased by the heating time. The elastcity and viscosity of the first exponential term which covers 70-74% of the total relaxation increased as cooking time was extended up to 1q min. The addition of gluten network strengthening agent, potassium bromate, at 1000ppm level reduced the elasticity and viscosity, while weakening agent, L-cystein, increased them. The relaxation time decreased after 11 min of cooking in both cases. The elasticity and viscosity of heat denatured gluten were affected differently by the concentration of added urea.

• Textile Coloration and Finishing
• /
• v.27 no.4
• /
• pp.318-326
• /
• 2015

A pre-treatment process is essential for getting high quality of digital textile printing(DTP). In this study, we have studied three kinds of carrageenan polymer(k-, ${\lambda}$-, i-Carrageenan) as a pre-treatment thickening agent for the first time. Alginate polymer was also examined and its results were compared with that of the three kinds of carrageenan polymer. To confirm the performance of each thickening agent, we examined for a sharpness, color strength and fastness(washing, rub, light). The result showed that ${\lambda}$-Carrageenan has superior property in sharpness with low viscosity and i-Carrageenan was excellent in the color strength among the pre-treatment agents. Washing fastness to color change and staining for the all samples were 4 or 4-5 grade. Both dry and wet rubbing fastness of the samples were 4-5 grade. However, ${\lambda}$-Carrageenan coated sample has the lowest grade in light fastness. As a result, we found the possibility of carrageenan polymer as pre-treatment agent.

• Macromolecular Research
• /
• v.14 no.3
• /
• pp.261-266
• /
• 2006

Blends of silicone rubber (VMQ) and liquid crystalline polymer (LCP) were prepared using a melt blending technique in the presence and absence of glass fiber and coupling agents. The effect of glass fiber and coupling agents on the thermal, dynamic mechanical, morphological pro-perties and cure characteristics of VMQ/LCP blends were studied. The vinyl silane coupling agent showed a significant effect on the above mentioned properties of VMQ/LCP blends by reacting at the interface between VMQ and LCP. The viscosity of the VMQ/LCP blends decreased with the addition of a coupling agent. A substantial improvement in storage modulus of VMQ/LCP blends was observed in the presence of glass fiber and coupling agents. However, as a coupling agent vinyl silane proved to be better than amine for the VMQ/LCP-glass-containing blends. The thermal stability of the pure silicone rubber was higher than those of the blends. This high thermal stability of silicone rubber was attributed to the Si-O-Si bonds. However, the thermal stability of the blends decreased further in the presence of a coupling agent, possibly due to a decrease in blend crystallinity.