• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.4
• /
• pp.549-559
• /
• 1999

An experimental study was peformed to measure the viscosity of microencapsulated PCM slurries as the functions of its concentration and temperature, and also influence to its fluid dynamics. For the viscosity measurement, a rotary type viscometer, which was equipped with temperature control system, was adopted. The slurry was mixed with water and Sodium Lauryl Sulphate as a surfactant by which its suspended particles were dispersed well without the segregation of particles during the experiment. The viscosity was increased as the concentration of MicroPCM particle added. The surfactant increased 5% of the viscosity over the working fluid without particles. Experiments were proceeded by changing parameters such as PCM particles'concentration as well as the temperature of working fluid. As a result, a model to the functions of temperature for the working fluid and its particle concentration is proposed. The proposed model, for which its standard deviation shows 0.8068, is agreed well with the reference's data. The pressure drop was measured by U-tube manometer, and then the friction factor was obtained. It was noted that the pressure drop was not influenced by the state of PCM phase, that is solid or liquid in its core materials at their same concentration. On the other hand, it was described that the pressure drop of the slurry was much increased over the working fluid without particles. A friction factor was placed on a straight line in all working fluids of the laminar flow regardless of existing particles as we expected.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.5
• /
• pp.1082-1086
• /
• 1999

Dried vegetables, white ginseng and spices, which were exposed to gamma and electron beam irradiation, were used in a detection study by measuring their starch content and viscosity change. The samples tested showed different levels of starch content(15.64~60.86%), which was not directly proportional to the viscosity of the samples. The correlation coefficients between irradiation dose and viscosity change were lower in the samples, such as cabbage, carrot, clean vegetable(chunggyungchae), garlic, mushroom, green onion, and red pepper, while some higher coefficients were found in ginger(R2=0.9271), white ginseng (R2=0.6223) and onion (R2=0.7909). Thus, dried ginger and white ginseng were selected to be used for a detection of irradiated samples using specific parameters(threshold values). Specific parameter for the nonirradiated ginger and ginseng were 13.31 and 13.93, respectively. On the other hand, gamma and electron beam irradiated samples at 2.5 kGy, the lowest dose for a commercial purpose, showed decreased values, 11.92 and 11.15 in ginger, and moreover 4.40 and 5.10 in ginseng. It is expected that a proportional decrease in a specific parameter with the absorbed doses will be a potentially useful index for detecting whether starchy foods have been irradiated or not.

• Electrical & Electronic Materials
• /
• v.10 no.7
• /
• pp.719-726
• /
• 1997

This research was conducted to analyze the change of surface tension, viscosity, streaming current and conductivity of transformer oil when it were injected with the interface active substances.(anionic:S-111, cationic:S-121, amphoteric:S-131) The changes properties of the surface tension and viscosity of the oil which were injected with the interface active substances were divided into the changes area and the minimum reduction area. The surface tension and viscosity of the oil which were injected with three different kinds of interface active substances showed remarkable change at the point where the concentration of the substance in anionic, in cationic and in amphoteric were 100[ppm], 10[ppm] and 1[ppm] respectively. The streaming current and conductivity of the same sample oil were also changed at the same densities of the surface tension and viscosity. For this factor, it was possibile for us to interpret the mechanism of the streaming current and conductivity. Therefore the interface active substances of the three kinds were injected into the oil within the limit of optimal volume, prevention effects of electrification were showed more excellence than unmixed insulating oil.

• Journal of Mechanical Science and Technology
• /
• v.16 no.2
• /
• pp.255-261
• /
• 2002

A newly designed mass-detecting capillary viscometer uses a novel concept to continuously measure non-Newtonian fluids viscosity over a range of shear rates. A single measurement of liquid-mass variation with time replaces the now rate and pressure drop measurements that are usually required by capillary tube viscometers. Using a load cell and a capillary, we measured change in the mass flow rate through a capillary tube with respect to the time, m(t), from which viscosity and shear rate were mathematically calculated. For aqueous polymer solutions, excellent agreement was found between the results from the mass-detecting capillary viscometer and those from a commercially available rotating viscometer. This new method overcomes the drawbacks of conventional capillary viscometers meassuring non-Newtonian fluid viscosity. First, the mass-detecting capillary viscometer can accurately and consistently measure non -Newtonian viscosity over a wide range of shear rate extending as low as 1 s$\^$-1/. Second, this design provides simplicity (i. e., ease of operation, no moving parts), and low cost.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.171-172
• /
• 2017

In order to meet the high performance of the concrete, the viscosity increases with water binder ratio and amount of powder. because of these problems, we use high performance water reducing agent and low viscosity water reducing agent, but side effects may occur when using large amount of water reducing agent. Therefore, in this research, in order to increase the viscosity, I would like to analyze the change in viscosity and flow characteristics of paste by utilizing fly ash and lung limestone which are generally thrown away without using high performance water reducing agent.

• The Journal of Korean Medicine
• /
• v.15 no.2 s.28
• /
• pp.212-232
• /
• 1994

I selected the theory of blood stasis and wetness-phlegm among the major 4 causes of Joong Poong(C.V.A.)(wind. fire. deficiency of vital energy and wetness-phlegm) and recent etiology of blood stasis. An experimental studies were done to investigate the effects of Danggieum (removing blood stasis and promoting blood circulation) and Ijintang(dissipating wetness-phlegm) on thrombosis and elevated blood viscosity. The results were as follows; 1. The number of platelets were significantly increased in only Danggieum group. 2. Related to the amount of fibrinogen. only Danggieum group revealed some increase. but both groups revealed no significance. 3. Related to the prothrombin time. Danggieum and Ijintang groups had significant decrease. but Danggieum group revealed more significance. 4. Related to the degree of concentration of FDP, only Danggieum group had significant decrease. 5. Whole blood viscosity and plasma viscosity in lower shear rates. both groups of Danggieum and Ijintang had significant decrease. 6. Related to the amount of RBC. both groups of Danggieum and Ijintang had significant decrease. 7. Related to the change of hematocrit. only Danggieum group, and the change of hemoglobin. only Ijintang group had significant decrease. 8. Related to the change of body temperature. only Ijintang group had significant raise. 9. Related to the changes of WBC. glucose, albumin, total protein and body weight. Danggieum and Ijintang groups had each increase or decrease. but no significance. According to the above results, Danggieum had more significant effect than Ijintang on the thrombosis. and Ijintang had more significant effect than Danggieum on the elevated blood viscosity. And it is considered that it might be more effective in treating Joong-Poong(C.V.A) to take medicines regarding patient's constitution and symptoms as well as the causes of Joong-Poong(C.V.A)

• Korean Journal of Food Science and Technology
• /
• v.33 no.2
• /
• pp.195-199
• /
• 2001

A study was carried out to establish a detection method for irradiated black pepper using amylograph characteristics. The maximum viscosity, viscosity at $93^{\circ}C$, viscosity after 15 min at $93^{\circ}C$, viscosity at $45^{\circ}C$, viscosity after 30 min at $45^{\circ}C$, and viscosity after 60 min at $45^{\circ}C$ decreased with increasing irradiation doses, but initial pasting temperatures, maximum viscosity temperatures, breakdown, setback, and consistency did not show great changes. The high correlation coefficients $(R^2>0.97)$ were shown between irradiation doses and amylograph characteristics except for breakdown $(R^2>0.75)$, setback $(R^2>0.88)$ and consistency $(R^2>0.31)$. These results suggest that detection of irradiated black pepper is possible using amylograph characteristics.

• Korean Journal of Materials Research
• /
• v.21 no.2
• /
• pp.100-105
• /
• 2011

The relative viscosity was measured at different filler loadings for a cycloaliphatic epoxy resin and hexahydro-4-methylphthalic anhydride hardener system filled with micro/nano hybrid silica. Various empirical models were fitted to the experimental data and a fitting parameter such as critical filler fractions (${\phi}_{max}$) was estimated. Among the models, the Zhang-Evans model gave the best fit to the viscosity data. For all the silica loadings used, ln (relative viscosity) varied linearly with filler loadings. Using the Zhang-Evans model and the linearity characteristics of the viscosity change, simple methods to predict the relative viscosity below ${\phi}_{max}$ are presented in this work. The predicted viscosity values from the two methods at hybrid silica fractions of $\phi$ = 0.086 and 0.1506 were confirmed for a micro:nano = 1:1 hybrid filler. As a result, the difference between measured and predicted values was less than 11%, indicating that the proposed predicting methods are in good agreement with the experiment.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.33 no.2
• /
• pp.138-143
• /
• 2016

In the present study, silk fibroin (SF) was dissolved in $CaCl_2/H_2O/EtOH$ solution at $85^{\circ}C$. After the dissolution, the SF solution was cooled down and stored at $4^{\circ}C$ for 28 d. The stability of the solution's viscosity and electrospinnability was observed to examine the stability of SF molecules during storage in $CaCl_2/H_2O/EtOH$ solution. The viscosities of $SF/CaCl_2/H_2O/EtOH$ solution and SF formic acid solution did not change during 28 days' storage of SF in $CaCl_2/H_2O/EtOH$ solution. The electrospinnability of the SF solution, mean diameter of the electrospun SF fiber, and crystallinity index of electrospun SF web did not change, regardless of the length of the storage period. These results imply that SF molecules do not degrade during 28 days' storage in $CaCl_2/H_2O/EtOH$ solution.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.19 no.2
• /
• pp.49-57
• /
• 2001

This thesis attempts to study ink transition for on the polycarbonate multicalculator plate for automobile. For this study, the change of weight by screen printed ink transition on polycarbonate material by ink viscosity(be diluted ; 0%, 5%, 10%, 20%) was observed. The weight by screen printed ink is depended on amount of added solvent. We have studied change of the weight by the transition of the ink that was screen-printed on polycarbonate which is to be printed according to the viscosity of the ink (diluent: undiluted solution 5%, 10%, 15%, 20%). This shows that ink transition become activated since the amount of ink(or/and the viscosity of ink) is increased.