• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.656-661
• /
• 2005

An optimization formulation of unconstrained damping treatment on beams is proposed to minimize vibration responses using a numerical search method. The fractional derivative model is combined with RUK's equivalent stiffness approach in order to represent nonlinearity of complex modulus of damping materials with frequency and temperature. The loss factors of partially covered unconstrained beam are calculated by the modal strain energy method. Vibration responses are calculated by using the modal superposition method, and of which design sensitivity formula with respect to damping layout is derived analytically. Plugging the sensitivity formula into optimization software, we can determine optimally damping treatment region that gives minimum forced response under a given boundary condition. A numerical example shows that the proposed method is very effective in minimizing vibration responses with unconstrained damping layer treatment.

• Structural Engineering and Mechanics
• /
• 제45권1호
• /
• pp.69-93
• /
• 2013

The present study deals with the dynamics of the flapwise (out-of-plane) vibrations of a rotating, internally damped (Kelvin-Voigt model) tapered Bernoulli-Euler beam carrying a heavy tip mass. The centroid of the tip mass is offset from the free end of the beam and is located along its extended axis. The equation of motion and the corresponding boundary conditions are derived via the Hamilton's Principle, leading to a differential eigenvalue problem. Afterwards, this eigenvalue problem is solved by using Frobenius Method of solution in power series. The resulting characteristic equation is then solved numerically. The numerical results are tabulated for a variety of nondimensional rotational speed, tip mass, tip mass offset, mass moment of inertia, internal damping parameter, hub radius and taper ratio. These are compared with the results of a conventional finite element modeling as well, and excellent agreement is obtained.

• 한국음향학회지
• /
• 제8권1호
• /
• pp.31-37
• /
• 1989

구속 점탄성 층을 갖는 복합보를 동흡진기로 이용하는 문제를 다루었다. 이 동흡진기의 효과를 조사하기 위해 양단고정 주진동 보에 설치했을 때의 변위전달율을 구하여 기존 균일 재질보 동흡진기 효과와 비교했다. 해석결과 최적 동흡진기를 구성하는 패러매터 값이 현재 활용되는 재질 측면에서 의미있는 범위내에 존재하고 있고 둘이상의 공진 진동수에서 전달율을 동시에 줄일 수 있었다. 이점으로 기존 제시된 비해 점탄성을 복합보가 유리하게 이용될 수 있음을 확인했다.

• 한국소음진동공학회논문집
• /
• 제15권7호
• /
• pp.829-835
• /
• 2005

An optimization formulation of unconstrained damping treatment on beam is proposed to minimize vibration responses using a numerical search method. The fractional derivative model is combined with RUK's equivalent stiffness approach in order to represent nonlinearity of complex modulus of damping materials with frequency and temperature. Vibration responses are calculated by using the modal superposition principle, and of which design sensitivity formula with respect to damping layout is derived analytically. Plugging the sensitivity formula into optimization software, we can determine optimally damping treatment region that gives minimum forced response under a given boundary condition. A numerical example shows that the proposed method is very effective in suppressing nitration responses by means of unconstrained damping layer treatment.

• 한국소음진동공학회논문집
• /
• 제13권12호
• /
• pp.938-946
• /
• 2003

Length of an unconstrained viscoelastic damping layer on beams is determined to maximizeloss factor using a numerical search method. The fractional derivative model can describe damping characteristics of viscoelastic damping materials accurately, and is used to represent nonlinearity of complex modulus with frequencies and temperatures. Equivalent flexural rigidity of the unconstrained beam is obtained using Ross, Ungar, Kelvin[RUK] equation. The loss factors of partially covered unconstrained beam are calculated by a modal strain energy method. Optimal lengths of the unconstrained viscoelastic damping layer of beams are identified with ambient temperatures and thickness ratios of beam and damping layer by using a finite-difference-based steepest descent method.

• 농업과학연구
• /
• 제23권2호
• /
• pp.233-241
• /
• 1996

The mechanical properties of biological materials depend on numerous factors. The majority of these relationships are still unknown today, especially with regard to their quantitative characteristics. The reason is that biological materials constitute biomechanical systems of very complex construction, whose behavior cannot be characterized by simple physical constants, as for example can that of engineering materials. The objectives of this investigation were to determine the compression creep and recovery properties of rice stalks at various levels of applied load The compression creep and recovery behavior of the rice stalk could be predicted precisely by rheological model which approached closely to the measured values. But the coefficients of the Burgers recovery model were different from those of the creep model. The Steady state creep behavior occurred at the higher level of force and the logarithmic creep behavior occurred at the lower level of force. The mechanical model being expected the creep behavior in relation with the level of applied load, which was well explained that the rice stalk might be visco-elastic material.

• 한국지반환경공학회 논문집
• /
• 제13권6호
• /
• pp.41-50
• /
• 2012

일반적인 그라우팅 재료는 물속에서 재료 분리가 발생하여 수중 그라우팅 작업시 시공 품질 확보가 매우 어렵다. 최근에는 다양한 혼화제를 첨가하여 수중에서 재료분리가 발생하지 않는 수중 불분리성의 그라우팅 재료들이 개발되고 있다. 본 연구에서는 계면활성제계 개질제를 이용하여 수중에서 재료분리가 발생하지 않으면서도 유동성을 충분히 갖는 점탄성 그라우트재를 개발하고 실내시험을 통해 해수 및 담수에 수중 불분리성 그라우팅 재료와 일반 그라우팅 재료를 시공하였을 때의 공학적 특성을 분석하였다. 본 연구에서 개발한 수중 불분리성 그라우팅 재료는 일반 그라우트재와 비교하여 해수와 담수 상태에서 충분한 강도가 발휘되었으며 수중에서 재료 분리가 발생하지 않아 수중에서도 좋은 시공 품질을 확보할 수 있을 것으로 평가되었다.

• Steel and Composite Structures
• /
• 제23권6호
• /
• pp.691-714
• /
• 2017

Rotating fluid induced vibration and instability of embedded piezoelectric nano-composite separators subjected to magnetic and electric fields is the main contribution of present work. The separator is modeled with cylindrical shell element and the structural damping effects are considered by Kelvin-Voigt model. Single-walled carbon nanotubes (SWCNTs) are used as reinforcement and effective material properties are obtained by mixture rule. The perturbation velocity potential in conjunction with the linearized Bernoulli formula is used for describing the rotating fluid motion. The orthotropic surrounding elastic medium is considered by spring, damper and shear constants. The governing equations are derived on the bases of classical shell theory (CST), first order shear deformation theory (FSDT) and sinusoidal shear deformation theory (SSDT). The nonlinear frequency and critical angular fluid velocity are calculated by differential quadrature method (DQM). The detailed parametric study is conducted, focusing on the combined effects of the external voltage, magnetic field, visco-Pasternak foundation, structural damping and volume percent of SWCNTs on the stability of structure. The numerical results are validated with other published works as well as comparing results obtained by three theories. Numerical results indicate that with increasing volume fraction of SWCNTs, the frequency and critical angular fluid velocity are increased.

• 소음진동
• /
• 제9권2호
• /
• pp.324-330
• /
• 1999

With the increase of track density, high rotational speed and the compatibility for various media such as CD-ROM, CD-R/RW, DVD-ROM/RAM/RW etc. in optical disk drive, the effective anti-vibration design is so crucial for robust operaton. Especailly when the drive is self-excited by unbalanced disk, internal sled base vibration and its external transmission to the case bring about so severe problem. Generally these two consideration points the practical anti-vibration design process to control thses two conflictive properties using finite element analysis. As an example of the design process, Duro 25 and 40 visco-elastic rubber mount was selected and analyzed. The stiffness obtained from FEM rubber model was well matched with the experiments. Also it was confirmed that the internal and external vibration induced from unbalanced disk have good agreement with experimental results. The proposed design process is adopted to the slim-type optical disk drive.

• 한국구조물진단유지관리공학회 논문집
• /
• 제8권2호
• /
• pp.195-204
• /
• 2004

본 연구에서는 약액주입 사질고결토에 대해 일정재하크리프시험과 반복재하크리프시험을 실시하여 점 탄소성 거동 규명과 크리프예측을 수행하였다. 일정재하크리프 시험결과 총 변형률은 탄성, 소성 그리고 점탄성변형률로 구분되었으며 이러한 변형률은 응력의 증가에 비례하여 증가하였고 회복된 변형률은 제하시간에 무관함을 알았다. 일정재하크리프시험 예측결과 일반화된 모델과 지수함수모델은 시험결과와 잘 일치하였다. 반복재하크리프시험에서 순간회복변형률은 반복횟수에 무관하였고 누적소성 변형률은 반복횟수에 따라 증가하였으며 응력레벨에 비례함을 알 수 있었다. 반복재하크리프시험의 예측결과 첫 사이클에서는 잘 일치하였으나 반복횟수가 증가함에 따라 약간의 오차가 발생되었다.