• 자동차안전학회지
• /
• 제16권2호
• /
• pp.60-66
• /
• 2024

Computer simulation significantly reduces the high costs associated with actual crash tests and is expanding due to its ability to analyze various test results quantitatively that are difficult to measure in real tests. Research on evaluation technologies is limited according to the finite element analysis, which aims to replace structural verification testing. In this study, considerations for virtual crash tests were derived, and the validity of the zero-energy mode (hourglass mode) was analyzed as part of the considerations for validating the results of vehicle crash simulations. The study reflects on the considerations for virtual crash tests and the variation in hourglass coefficient values affects the occurrence of the hourglass mode. As the hourglass coefficient changes, the maximum hourglass energy reaches over 5% of the maximum internal energy, necessitating a conservative review. A comprehensive study of the maximum hourglass energy is required, considering additional analysis results for various models and collision conditions.

• 한국자동차공학회논문집
• /
• 제11권5호
• /
• pp.201-209
• /
• 2003

Virtual human models are widely used to save time and expense in vehicle safety studies. A human model is an essential tool to visualize and simulate a vehicle driver in virtual environments. This research is focused on creation and application of a human model fer virtual reality. The Korean anthropometric data published are selected to determine basic human model dimensions. These data are applied to GEBOD, a human body data generation program, which computes the body segment geometry, mass properties, joints locations and mechanical properties. The human model was constituted using MADYMO based on data from GEBOD. Frontal crash and bump passing test were simulated and the driver's motion data calculated were transmitted into the virtual environment. The human model was organized into scene graphs and its motion was visualized by virtual reality techniques including OpenGL Performer. The human model can be controlled by an arm master to test driver's behavior in the virtual environment.

• 자동차안전학회지
• /
• 제15권4호
• /
• pp.39-47
• /
• 2023

Research on the safety of autonomous vehicle is being conducted in various countries, including the European Union, and computer simulation techniques so called 'Virtual Tool Chain' are mainly used. As part of the crash safety study of autonomous vehicle, 25 car to car collision scenarios were provided as a result of a real accident-based accident reproduction analysis study conducted by a domestic research institution, and a vehicle crash analysis was performed using the FE car to car model of the Honda Accord. In order to analyze the results of the car to car simulation and to construct a database, major crash parameters were selected as impact speed, angle, location, and overlap, and a method of defining them in an indexed form was presented. In order to compare the crash severity of each scenario, a value obtained by integrating the resultant acceleration measured by the ACU of the vehicle was applied. The equivalent collision test mode was derived by comparing the crash severity of the regulation test mode, 30 deg rigid barrier mode, in the same way.

• Journal of Mechanical Science and Technology
• /
• 제15권4호
• /
• pp.448-458
• /
• 2001

The primary goal of virtual prototyping is to eliminate the need for fabricating physical prototypes, and to reduce cost and time for developing new products. A virtual prototyping seeks to create a virtual environment where the development of a new model can be flexible as well as rapid, and experiments can be carried out effectively concerning kinematics, dynamics, and control aspects of the model. This paper addresses the virtual environment used for virtual prototyping of a passenger vehicle. It has been developed using the dVISE environment that provides such useful features as actions, events, sounds, and light features. A vehicle model including features, and behaviors is constructed by employing an object-oriented paradigm and contains detailed information about a real-size vehicle. The human model is also implemented not only for visual and reach evaluations of the developed vehicle model, but also for behavioral visualization during a crash test. For the real time driving simulation, a neural network model is incorporated into the virtual environment. The cases of passing bumps with a vehicle are discussed in order to demonstrate the applicability of a set of developed models.

• 자동차안전학회지
• /
• 제3권2호
• /
• pp.17-21
• /
• 2011

Vehicle safety device such as active headrest and rear detection system has been developing as people are interested about rear end collision more than head on or than front. However, there is no any standard or criterion in order to evaluate vehicle safety device for rear end collision. Also there is no test protocol about rear end collision in vehicle experiment. Therefore, this research developed scenario for experiment about rear end collision in vehicle experiment. Also this research evaluated dangerousness about vehicle test and fitness about re-enacting rear end collision using scenario developed using commercial software (PC-Crash) which can re-enact vehicle collision in virtual vehicle experiment. Scenario developed according to statistics from National Highway Traffic Safety Administration and German In-Depth Accident Study. Scenario has twelve cases which composed of Re-LVS (Rear end Leading Vehicle Stop), Re-LVM (Rear end Lead Vehicle Moving) and scenario for evaluation about malfunction of active headrest.

• 대한인간공학회지
• /
• 제21권2호
• /
• pp.13-23
• /
• 2002

Human dummies are essential tools in the development of such products as vehicle have been actively used not only in reach and view field tests. but also in impact perception evaluations. This study attempted to obtain geometric and dynamic model body segments from Korean anthropometric data. The investigation focused on the de both human and dummy for the geometric and inertial properties. The dynamic modeli being suggested is based on rigid body dynamics using fifteen individual body segments by joins. The segments are connected at the locations representing the physical joint body so that each segment has its mass and moment of inertia. For visual three-dimensional graphic was used for easier implementation of the dumn applications. For applications, proposed Korean dummies Were used in dynamic crash and driver's view and reach test modules were developed in virtual environment.

• 한국철도학회논문집
• /
• 제20권2호
• /
• pp.173-181
• /
• 2017

장애물제거기는 선로 내 장애물에 의한 충돌사고 발생 시 장애물을 선로 밖으로 밀어내거나 에너지흡수부재를 통해 충돌에너지를 흡수하여 열차 탈선을 방지하고 충돌사고에 의한 피해를 최소화하기 위한 장치이다. 본 연구에서는 인장형 에너지흡수부재와 4절 링크를 이용하여 장애물제거기의 작동 메커니즘을 구성하여 장애물제거기를 설계하였다. 또한 EN 15227에서 요구하는 정적강도 및 에너지흡수조건을 확인하기 위한 성능검증시험 방법을 고안한 뒤 유한요소해석 및 UTM (Universal Test Machine)을 이용한 성능검증시험을 수행하였다. 본 연구를 통해 EN 15227의 요구조건을 만족하는 장애물제거기를 개발하였으며, 제안된 장애물제거기의 설계 및 검증 절차에 따라 붕괴하중의 조절이 가능하며 이를 실험을 통해 검증할 수 있는 방법을 제안하였다.