• 대한의용생체공학회:의공학회지
• /
• 제26권1호
• /
• pp.23-30
• /
• 2005

3D virtual endoscopy has been used as an alternative non-invasive procedure for visualization of hollow organs. However, due to computational complexity, this is a time-consuming procedure. In this paper, we propose a fast volume rendering algorithm based on perspective ray casting for virtual endoscopy. As a pre-processing step, the algorithm divides a volume into hierarchical blocks and classifies them into opaque or transparent blocks. Then, in the first step, we perform ray casting only for sub-sampled pixels on the image plane, and determine their pixel values and depth information. In the next step, by reducing the sub-sampling factor by half, we repeat ray casting for newly added pixels, and their pixel values and depth information are determined. Here, the previously obtained depth information is utilized to reduce the processing time. This step is recursively performed until a full-size rendering image is acquired. Experiments conducted on a PC show that the proposed algorithm can reduce the rendering time by 70- 80% for bronchus and colon endoscopy, compared with the brute-force ray casting scheme. Using the proposed algorithm, interactive volume rendering becomes more realizable in a PC environment without any specific hardware.

• International Journal of Computer Science & Network Security
• /
• 제24권2호
• /
• pp.67-78
• /
• 2024

Software-Defined Networking (SDN) is a new emerging networking paradigm that has adopted a logically centralized architecture to increase overall network performance agility and programmability. Combining network virtualization with SDN will guarantees for combined advantages of improved flexibility and network performance. Combining SDN with hypervisors divides the network physical resources into several logical transparent and isolated virtual SDN network (vSDN), where each has its virtual controller. However, SDN hypervisors bring several advantages as well as several challenges to its network operators as for the virtual appliances, their efficient placement, assurance of network performance is mandatory, and their dynamic instantiation with their migration. In this article, we provide a brief and concise review of network virtualization along with its implementation in the SDN network. SDN hypervisors types are discussed, and taxonomy is provided to demonstrate the importance of hypervisors in SDN. A comparison of SDN hypervisors is performed to elaborate on the vital hypervisor software along with their features, and different challenges are discussed faced by the SDN network. A framework is proposed to add combined functionalities of hypervisors to create a more effective and efficient virtual system. The purpose of the framework is to increase network performance through proper configuration of resources, software, control plane isolation functions with defined rules and policies.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.103-107
• /
• 2009

Because individual HRTFs (Head-Related Transfer Functions) vary from a person to a person, a HRTF database has been measured by researchers to investigate the inter-subject variation, and to generate high fidelity virtual sound image. Individual HRTFs not only vary between subjects but also vary due to wearing clothes and glasses in daily life. However, influence of different dressing condition on the measured HRTF was not sufficiently investigated. To quantify the effect of wearing clothes and glasses, dummy's HRTF is measured in an anechoic chamber with various dressing condition, and is evaluated in the sense of spectral distortion. HRTFs are measured both in the median plane and in the horizontal plane. In the median plane, under 6kHz, effect of different wearing clothes and glasses is negligible. Over 6kHz, however, effect of clothing distorts HRTF about 6dB in the sense of spectral distortion. Moreover, at high frequencies, effect of glasses is no longer negligible. In the horizontal plane, at some azimuths, even additional light cloth over the dummy can change the spectrum of HRTF (6dB spectral distortion) especially when sound source is at contralateral positions. Therefore, HRTF measurement with different wearing conditions can broaden the capability of HRTF customization whose technique utilizes a HRTF database.

• 한국소음진동공학회논문집
• /
• 제19권2호
• /
• pp.208-216
• /
• 2009

In this paper, we present the equations of motion by which the natural vibration of a rotating annular disk can be analyzed accurately. These equations are derived from the theory of finite deformation and the principle of virtual work. The radial displacements of annular disk at the steady state where the disk is rotating at a constant angular velocity are determined by non-linear static equations formulated with 1-dimensional finite elements in radial direction. The linearlized equations of the in-plane vibrations at the disturbed state are also formulated with 1-dimensional finite elements in radial direction along the number of nodal diameters. They are expressed as in functions of the radial displacements at the steady state and the disturbed displacements about the steady state. In-plane static deformation modes of an annular disk are used as the displacement functions for the interpolation functions of the 1-dimensional finite elements. The natural vibrations of an annular disk with different boundary conditions are analyzed by using the presented model and the 3-dimensional finite element model to verify accuracy of the presented equations of motion. Its results are compared and discussed.

• 한국통신학회논문지
• /
• 제34권12C호
• /
• pp.1154-1166
• /
• 2009

본 논문에서는 다시점 동영상을 이용한 기저선(baseline)상의 가상시점 영상 생성과 기저선상 외의 가상시점 영상 생성을 위한 기법을 제안한다. 제안한 기법에서는 가상 시점을 생성하기 위하여 영상의 깊이(depth)정보와 고정된 카메라의 기하학적 특성을 이용한 3차원 워핑(warping) 방법을 적용한다. 영상의 실제 3차원 좌표는 영상의 깊이 정보와 카메라의 기하학적 특성을 이용하여 산출되고, 산출된 3차원 좌표는 임의 위치의 가상 카메라에 투영(projection)되어 2차원의 가상 시점 영상이 생성된다. 제안한 방법에 의해 생성된 기저선상의 중간시점 영상은 기존의 방법으로 생성된 중간시점 영상보다 PSNR이 0.5dB 이상 향상된 결과를 나타내었고, 기저선상 외의 가상 시점 영상에서 나타나는 많은 미처리 영역을 보다 효과적으로 처리하여 가상시점 영상을 생성할 수 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1183-1188
• /
• 2005

In this paper, we propose a 3D automated measuring system which measures the mandibular movements and the reference plane of the jaw movements. In diagnosis and treatment of the malocclusions, it is necessary to estimate the mandibular movements and the reference plane of the jaw movements. The proposed system is configured with double stereo-cameras, PC, two moving pattern plates(MPPs), two fixed pattern plates(FPPs) and one orbital marker. The virtual pattern plate is applied to calculate the homogeneous transformation matrices which describe the coordinates systems of the FPP and MPP with respect to the world coordinates system. To estimate the parameters of the hinge axis, the Euler's theorem is applied. The hinge axis points are intersections between the FPPs and the hinge axis. The coordinates of a hinge axis point with respect to the MPP coordinates system are set up to fixed value. And then, the paths of the jaw movement can be calculated by applying the homogeneous transformation matrix to fixed hinge axis point. To examine the accuracy of the measurements, experiments of measuring the hinge axis points and floating paths of them are performed using the jaw motion simulator. As results, the measurement errors of the hinge axis points are within reasonable boundary, and the floating paths are very similar to the simulator's moving path.

• 대한기계학회논문집A
• /
• 제35권8호
• /
• pp.835-846
• /
• 2011

최근 보편화 되고 있는 내측개방형절골술 시에 의도하지 않은 경골후방경사각의 변화로 인한 문제점들이 보고되었다. 이를 해결하기 위해 많은 연구들이 진행되어 왔지만 환자의 다양한 경골의 형상 및 절단면의 기울기에 적용될 수 있는 일반적 해석 모델은 아직 제안되지 못하고 있다. 따라서 본 논문에서는 일반적인 케이스에 적용할 수 있는 근위경골절골술의 해석 모델을 제안한다. 이를 위해 내반교정각만을 조정할 수 있는 가상경골축을 정의하고, 이를 통해 절단면과 경골개방축이 내반교정각에 주는 영향을 나타내는 수학적 모델을 제안하고, 기존의 수술적인 변수들간의 상관관계를 명확히 나타내었다. 또한 내반교정각과 경골후방경사각에 추가로, 새로운 각도인 경골뒤틀림각의 존재를 도입함으로써 수술 시 발생하는 모든 기하학적 변수들간의 관계를 완성된 형태로 표현하였다.

• 대한치과교정학회지
• /
• 제51권5호
• /
• pp.321-328
• /
• 2021

Objective: To examine the accuracy of computer-aided intraoperative navigation (Ci-Navi) in bimaxillary orthognathic surgery by comparing preoperative planning and postoperative outcome. Methods: The study comprised 45 patients with congenital dentomaxillofacial deformities who were scheduled to undergo bimaxillary orthognathic surgery. Virtual bimaxillary orthognathic surgery was simulated using Mimics software. Intraoperatively, a Le Fort I osteotomy of the maxilla was performed using osteotomy guide plates. After the Le Fort I osteotomy and bilateral sagittal split ramus osteotomy of the mandible, the mobilized maxilla and the distal mandibular segment were fixed using an occlusal splint, forming the maxillomandibular complex (MMC). Real-time Ci-Navi was used to lead the MMC in the designated direction. Osteoplasty of the inferior border of the mandible was performed using Ci-Navi when facial symmetry and skeletal harmony were of concern. Linear and angular distinctions between preoperative planning and postoperative outcomes were calculated. Results: The mean linear difference was 0.79 mm (maxilla: 0.62 mm, mandible: 0.88 mm) and the overall mean angular difference was 1.20°. The observed difference in the upper incisor point to the Frankfort horizontal plane, midfacial sagittal plane, and coronal plane was < 1 mm in 40 cases. Conclusions: This study demonstrates the role of Ci-Navi in the accurate positioning of bone segments during bimaxillary orthognathic surgery. Ci-Navi was found to be a reliable method for the accurate transfer of the surgical plan during an operation.

• 대한치과교정학회지
• /
• 제50권4호
• /
• pp.258-267
• /
• 2020

Objective: This study aimed to analyze the correlation of horizontal and sagittal planes used in two-dimensional diagnosis with lip canting by using three-dimensional (3D) analysis. Methods: Fifty-two patients (25 men, 27 women; average age: 24 years) undergoing treatment for dentofacial deformity were enrolled. Computed tomography images were acquired, and digital imaging and communication in medicine files were reconstructed into a 3D virtual model wherein horizontal and sagittal craniofacial planes were measured. Subsequently, the correlations of lip canting with these horizontal and sagittal planes were investigated. Results: The mandibular symmetry plane, the occlusal plane, Camper's plane, the mandibular plane, Broadbent's plane, and the nasal axis plane were correlated with the amount of lip canting (Pearson's correlation coefficients: 0.761, 0.648, 0.556, 0.526, 0.438, and 0.406, respectively). Planes associated with the lower part of the face showed the strongest correlations; the strength of the correlations decreased in the midfacial and cranial regions. None of the planes showed statistically significant differences between patients with clinical lip canting (> 3°) and those without prominent lip canting. Conclusions: The findings of this study suggest that lip canting is strongly correlated with the mandibular symmetry plane, which includes menton deviation. This finding may have clinical implications with regard to the treatment of patients requiring correction of lip canting. Further studies are necessary for evaluating changes in lip canting after orthognathic surgery.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.257-260
• /
• 1997

In this paper, the double inverted pendulum having a single actuator is built and the controller for the system is proposed. The lower link is hinged on the plate to free for rotation in the x-z plane. The upper link is connected to the lower link through a DC motor. The double inverted pendulum built can be kept upright posture by controlling the position of the upper link even though the proposed inverted pendulum has no actuator in lower hinge. The algorithm to control the inverted pendulum is consisted of a state feedback controller within a linearizable range and a fuzzy logic controller coupled with a feedback linearization control for the rest of the range. Concept of the virtual work is employed to drive the linearlized model for the state feedback controller. The feedback linearization controller drives a DC motor with the modified reference joint angle from the fuzzy controller which adjusts a upright posture of a proposed pendulum system. Finally, the experiments are conducted to show the validity of the proposed controller.