The large scaled field test by prefabricated vertical drains was performed to evaluate the superiority of vertical discharge capacity for drain materials through compare and analyze the time-settlement behavior with drain spacing and the compression index and consolidation coefficient obtained by laboratory experiments and field monitoring system 1. The relation of measurement settlement( $S_{m}$) versus design settlement( $S_{t}$) and measurement consolidation ratio( $U_{m}$) versus design consolidation ratio( $U_{t}$) were shown $S_{m}$=(1.0~l.1) $S_{t}$, $U_{m}$=(1.13~l.17) $U_{t}$, at 1.0m drain spacing and $S_{m}$=(0.7~0.8) $S_{t}$, $U_{m}$=(0.92~0.99) $U_{t}$ at 1.5m drain spacing, respectively. 2. The relation of field compression index( $C_{cfield}$) and virgin compression index( $V_{cclab}$) was shown $C_{cfield}$=(1.0~1.2) $V_{cclab}$, But it was nearly same value when considered the error with determination method of virgin compression index and prediction method of total settlement. 3. field consolidation coefficient was larger than laboratory consolidation coefficient, and the consolidation coefficient ratio( $C_{h}$/ $C_{v}$) were $C_{h}$=(2.4 ~ 3.0) $C_{v}$. $C_{h}$=(3.5 ~ 4.3) $C_{v}$ at 1.0m and 1.5m drain spacing and increased with increasing of drain spacingngasing of drain spacingng spacingng
A large scale field test of prefabricated vertical drains was performed to anayze the effect of parameters of the very soft clay at a test site. compression index and the coefficient of horizontal consolidation obtained by back-analysis of settlement data were compared with those obtained by means of laboratory tests. Hyperbolic method, Asaoka meoth and curve fitting method were used to compute final settlement of coefficient of consolidation. The relationships of settlement measurement(Sm) versus design settlement(St) and the measurement consolidation ratio(Um) versus design consolidation (Ut) were shown as Sm=(1.0~1.1) St , Um=(1.13~1.17) Ut at 1.0m spacing of drain and Sm=(0.7~0.8)St, Um= (0.92~0.99) Ut at 1.5 m spacing of drain, respectively . The relationships of the field compression index(CcField) and virgin compression index(vcc lab) were shown as Ccfield =(1.0~1.2)vcc lab . But it was nearly within the same range when considering the error factor with the determination method of virgin compression index and the prediction back-analysis of the settlement data was larger than the coefficient of vertical consolidation, and the ratio of consolidation coefficient (Ch/Cv) was Ch =(2.4~2.9) Cv , Ch=(3.4~4.2) Cv at 1.0m and 1.5m spacing of drain, respectively.
본 연구에서는 부산항 신항 및 부산항 북항의 해성점토, 김해와 양산을 포함한 낙동강 중·하류, 울산지역에 분포하고 있는 연약한 점토층에 대하여 물성 시험 및 표준압밀시험을 실시한 후 결과를 활용하여 물성 특성 중 시료의 교란 여부와 관계없고 개인별 시험오차 발생이 작은 물성인 함수비를 이용하여 압축지수, 처녀압축지수, 압밀계수, 팽창지수, 2차압축지수 등을 회귀분석하여 상관성과 정확도를 평가하여 함수비로 압밀정수를 평가 및 산정할 수 있는 방안을 검토하였다. 압축지수를 산정하기 위해 물성 시험 중 가장 많이 활용되는 함수비 및 간극비, 액성한계와 상관성을 분석한 결과 액성한계가 가장 낮은 상관성을 가지는 것으로 확인되었다. 현재 자연상태의 함수비를 활용하여 압밀정수를 선형회귀분석한 결과 높은 상관성을 보여 침하량 및 침하시간을 결정할 수 있는 관계식을 제시하였다. 본 연구결과 부산, 경남지역에 분포하고 있는 퇴적 점토층의 지반침하 검토 시 함수비를 이용하여 압밀정수를 평가 및 산정할 수 있는 대안으로 활용할 수 있다.
한반도 서, 남해안 해성점토에 대하여 초기간극비와 자연함수비 및 액성한계의 물리적 특성과 압축지수와의 상관성을 규명하기 위해 비교적 신뢰성이 크다고 볼 수 있는 대형 항만 공사용 최근자료를 분석하였다. 시료교란의 정도를 분석하기 위하여 각 표본별 실내압밀시험을 실시하고 Schmertmann이 제안한 방법으로 보정하여 수정압축지수를 산정하였다. 또한 이들 자료를 토대로 실내압밀시험으로부터 얻어진 압축지수를 경험적 방법에 의하여 보정한 후 현장 처녀압축곡선과의 관계를 분석하고, 단순회귀분석, 다중회귀분석 및 비선형 회귀분석을 실시하여 최적의 회귀모델을 구한 후 해성점토에 적용할 수 있는 토질특성과 시료교란의 영향을 고려한 압축지수와의 상관 관계식을 제안하였다. 분석 결과, 시료교란의 영향을 경험적 방법으로 평가해 본 결과 현장 압축지수는 실험실 압축지수의 1.16배정도 크게 평가되었다. 해성점토의 물리적 특성과 압축지수의 상관성에 대한 최적의 회귀모형은 토질정수의 누승식 또는 지수승식 형태의 비선형회귀식이 가장 적합한 것으로 나타났다. 또한, 설계 및 실무에 보다 쉽게 적용할 수 있도록 하기 위하여 선형관계식을 사용하는 경우에는 압축지수의 상관식을 물성치의 구간에 따라 구분하여 사용하는 것이 바람직하다.
본 연구는 현재 시공중인 사업부지를 선정하여 시험시공중에 있는 연약지반에서 페이퍼 드레인 공법에 의하여 처리한 지반에서 드레인의 타입간격별 침하거동을 파악하고, 실내시험과 현장계측치로부터 구한 압축지수와 압밀계수를 비교분석하여 배수성능의 우수성을 평가한 것으로 그결과를 요약하면 다음과 같다. 1. 실측침하량($S_m$)과 설계침하량($S_t$)의 관계 및 실측압밀도($U_m$)와 설계압밀도($U_t$)와의 관계는 드레인 타입간격 1.0m에서는 $S_m=(1.0{\sim}1.1)S_t$, $U_m=(1.13{\sim}1.17)U_t$로 나타났고, 드레인 타입간격 1.5m에서는 $S_m=(0.7{\sim}0.8)S_t$, $U_m=0.92{\sim}0.99)U_t$의 범위로 나타났다. 2. 현장압축지수($Cc_{Field}$)와 처녀압축지수($V_{CC_{lab.}}$)와의 관계는 $Cc_{Field}=(1.0{\sim}1.2)V_{CC_{lab.}}$로 나타났으나, 처녀압축지수의 결정밥법과 최종예상 침하량의 적용방법에 따른 오차를 감안하면 거의 동일한 것으로 판단된다. 3. 계측치로부터 역산한 현장압밀계수는 실내시험에서 구한 압밀계수보다 크게 나타났고, 압밀계수비($C_h/C_v$)는 드레인 타입간격 1.0m에서는 $C_h=(2.4{\sim}3.0)C_v$, 드레인 타입간격 1.5m에서는 $C_h=(3.5{\sim}4.3)C_v$의 범위로 타입간격이 넓을수록 크게 나타났다. 4 드레인 타입간격에 따른 드레인 자재별 배수성능 평가기준을 압밀계수비의 결과를 기초로 판단하여 보면, 드레인 타입간격 1.0m에서는 Mebra 드레인, 드레인 타입간격 1.5m에서는 Amer드레인이 약간 우수한 것으로 나타났으나, 동일한 타입간격에서는 재질간의 큰차이가 발생되지 않아 모두 동일한 배수성능을 갖는 것으로 판단된다.
본 연구는 연약지반의 심도가 갚으면서 압밀침하량이 큰 지역에서 연직드레인 공법에 의하여 개량한 지반의 침하거동을 파악하고, 현장계측결과를 기초로 기존의 최종침하량의 예측방법과 현장계측치로부터 역산한 압축지수와 압밀계수의 범위를 실내시험과 비교분석 한 것으로 본 연구 대상지역에서 얻은 결과를 요약하면 다음과 같다. 1. 최종침하량 예측방법에 의하여 구한 최종예상침하량은 쌍곡선 방법이 가장 크고, Asaoka 방법과 Curve fitting 방법은 유사하게 나타났으며, 타입간격이 좁을 경우에는 교란영향을 고려한 설계가 검토되어야 할 것으로 판단된다. 2. 실측압밀도($U_m$)와 설계압밀도($U_t$)와의 관계는 쌍곡선 방법에서 $U_m$=(0.88~1.03)$U_t$으로 약간 작게 나타났고, Asaoka 방법은 $U_m$=(1.07~1.20)$U_t$, Curve fitting 방법은 $U_m$=(1.13~1.17)$U_t$으로 유사하게 나타났다. 3. 실내압축지수($V_{cclab}$)와 현장압축지수($Cc_{field}$)와의 관계는 쌍곡선 방법에서는 $Cc_{field}$=(1.26~1.45)$V_{cclab}$, Asaoka 방법에서는 $Cc_{field}$=(1.08~1.15)$V_{cclab}$, Curve fitting 방법에서는 $Cc_{field}$=(1.04~1.21)$V_{cclab}$의 범위로 쌍곡선방법에서는 약간 크게 나타났고, Asaoka와 Curve fitting 방법은 거의 동일한 값을 나타냈다. 4. 현장계측치로부터 역산한 현장압밀계수 ($C_h$)와 실내시험에서 구한 수직압밀계수($C_v$)와의 비는 ($C_h$/$C_v$) 쌍곡선방법에서는 0.7~0.9. Asaoka 방법에서는 0.9~1.5. Curve fitting 방법에서는 2.4~3.0의 범위로 나타났다. 5. 현장압밀계수는 방치기간이 경과함에 따라서 점차로 감소하는 경향을 나타내므로 압밀이 완료되었을 때에 최종침하량 예측방법에 의하여 재분석한 후 정확한 압밀계수를 산정하는 것이 합리적이라고 판단된다.
Building on/with expansive soils with no treatment brings complications. Compacted expansive soils specifically fall short in satisfying the minimum requirements for transport embankment infrastructures, requiring the adoption of hauled virgin mineral aggregates or a sustainable alternative. Use of hauled aggregates comes at a high carbon and economical cost. On average, every 9m high embankment built with quarried/hauled soils cost $12600MJ.m^{-2}$ Embodied Energy (EE). A prospect of using mixed cutting-arising expansive soils with industrial/domestic wastes can reduce the carbon cost and ease the pressure on landfills. The widespread use of recycled materials has been extensively limited due to concerns over their long-term performance, generally low shear strength and stiffness. In this contribution, hydromechanical properties of a waste tyre sand-sized rubber (a mixture of polybutadiene, polyisoprene, elastomers, and styrene-butadiene) and expansive silt is studied, allowing the short- and long-term behaviour of optimum compacted composites to be better established. The inclusion of tyre shred substantially decreased the swelling potential/pressure and modestly lowered the compression index. Silt-Tyre powder replacement lowered the bulk density, allowing construction of lighter reinforced earth structures. The shear strength and stiffness decreased on addition of tyre powder, yet the contribution of matric suction to the shear strength remained constant for tyre shred contents up to 20%. Reinforced soils adopted a ductile post-peak plastic behaviour with enhanced failure strain, offering the opportunity to build more flexible subgrades as recommended for expansive soils. Residual water content and tyre shred content are directly correlated; tyre-reinforced silt showed a greater capacity of water storage (than natural silts) and hence a sustainable solution to waterlogging and surficial flooding particularly in urban settings. Crushed fine tyre shred mixed with expansive silts/sands at 15 to 20 wt% appear to offer the maximum reduction in swelling-shrinking properties at minimum cracking, strength loss and enhanced compressibility expenses.
기초 구조물 설계에 있어서 지지력 및 압밀 침하량 산정식을 각각 단일 모우드 거동함수(perfor trance function)로 설정하여 실측된 토성자초를 확률변수로 취해서 기술류계학적 분석을 기행했다. 이 분석결과로서 얕은 기초가 파괴상태에 이르렀을 때의 신뢰도와 그 때에 거동되고 있는 설계변수치(check points)를 "Advanced first-order second moment method"로 구했다. 설계변수들 사이의 관계를 무연관-정규분포, 무상관-비정규분포, 유상관-정규분포 및 유상관-비정규분포 등의 유형 으로 분류하여 신뢰도 및 설계변수치를 비교 검토하여 얻은 주요한 결론은 다음과 같다. 1. 지지력 모우드 1) CU test 의한 점착력과 tans사이에는 약한 음상관치 있으며, 각각 대규분포 및 대수정륜 분포를 한다. 2) 신뢰지수를 2.34로 제한했을 경우, 유상관-대수정규분포 유형의 지지력은 18.6t/m2으로서 가장 낮게 되므로, 이 이외의 유형은 지반조건을 과대평가할 우려가 있다. 2. 압밀 침하량 모우드 1) 압축비(compression ratio) 및 선행 압밀응력은 각각 정규분포 및 대수정규분포를 이루며, 이들의 상관성은 연계적 독립변수로 취급해도 좋을 만큼 매우 낮다. 2) 압밀 침하량을 확정론적 방법으로 산출한 16cm보다 더 낮게 취하면, 유상관일대수정규분포류 형의 신뇌맥가 가장 낮게 평가된다. 따라서, 얕은 기초 구조물을 신뇌도나 파괴확률을 해석하는 데 있어서, 정확한 확률밀도함수로서 복잡한 수치적분에 의한 엄밀해보다는 개략적인 확률분포형태와 비교적 쉽게 얻어지는 공분산까지를 고려하면, 기초의 지반조건이 과소평가될 우려가 없다.가될 우려가 없다.의 뽕밭에 발생한 발아불량현상의 원인은 주인이 저온에 의한 동해라고 볼 수 있으며 지역적으로는 붕소결핍에 의한 발아불량현상도 적지 않았고 특히 붕소결핍이 동해피해를 가속화시켰다고 볼 수 있다.dard deviation)were estimated, and diagram which shows the relationship between mean annual maximum rainfall($$) and frequency factor for each durations were drawn. PMP was estimated by statistical method using the PMP frequency factor obtained from the diagram and statistics($$, Sn). The PMP-Duration Equation was derived from the envelope curve in order to obtain the PMP for an arbitrary duration. The isohyetal map of 24 hours PMP and PMP. DAD curve for the whole of Korea were drawn in accordance with the point PMP values.el size는 거의 차이가 없었는데, 특히 수당영화수 및 sink용량에 대한 주연효과정도는 계통에 따라 상당한 차이를 보였다. 계통의 자체경쟁정도는 출수후보다는 출수전 생식생장기간에 더욱 심하고 계통간차이도 큰 것 같았다. 일반적으로 수당sink용량이 클수록 출수전 자체경쟁정도가 심한 경향이었으나 계통에 따라서는 수당 sink용량이 작으면서 자체경쟁도가 심한 것(수원264호 등)이
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.