• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 한국염색가공학회 2009년도 학술발표대회
• /
• pp.118-119
• /
• 2009

As the rapid development of the electronics, the demand for portable electronics and wireless sensors is growing faster, also with the increased needs of one material which can power it automatically, and then power the electrical devices. The piezoelectric effect of the PVDF material can be used for this. So in this paper, PVDF multilayer films were made for this aim. Make the PVDF / DMAc solution in the 10% concentration; use the spin coater technique to make films with the optimum process parameters: the spin rate is 1260rpm; the spin time is 70s; the dry temperature is 100$^{\circ}C$; the dry time is 30mins. And also, for obtaining the higher $\beta$-phase crystallinity, put the Ca(NH3)2.4H2O into the PVDF / DMAc solution system.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1472-1475
• /
• 1996

D-E hysteresis loops have been measured for the 65/35 mole % copolymer of vinylidene fluoride and trifIuoroethyIene over wide temperature range. The results were analyzed and discussed. The remanent polarization and the coercive field at room termperature were estimated to be 75 $mC/m^3$ and 55 MV/m respectively. D-E hysteresis loops were observed even below the glass transiation temperature$-20^{\circ}C$) and the remanent polarization and the coercive field were larger than larger, as the temperature lower. It seems that the remanent polarization and the coercive field depend on the amorphous region as well as crystalline region in this copolymer. And the ferroelectric-to-paraelectric phase transition was observed at $90^{\circ}C$ on heating and $80^{\circ}C$ on cooling. Double hysteresis loops were observed at the temperature($85^{\circ}C$) of paraelectric phase.

• Journal of the Korean Applied Science and Technology
• /
• 제32권4호
• /
• pp.718-723
• /
• 2015

For the fabrication of the Si negative electrode in Li-ion batteries (LIBs) containing the cross-linking polymer binder, in this work, the urethane acrylate (UA) oligomer was synthesized via a simple synthetic process. The cross-linked poly(urethane acrylate) (CPUA)/carbone black (CB)/Si composite (CPUA/CB/Si composite) was fabricated through reactions between their reactive vinyl segments in the UA oligomer. Interestingly, the CPUA/CB/Si composite showed better cycle performance than the poly(vinylidene fluoride) (PVdF)/CB/Si composite (PVdF/CB/Si composite) and the polyurethane (PU)/CB/Si composite (PU/CB/Si composite). The CPUA/CB/Si composite had the best lithiation of about $2586mAh\;g^{-1}$. The UA oligomer showed a good compatibility with the electrode materials and current collector after and before a curing process.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.224-225
• /
• 2005

The microstrip patch antenna with PVDF (poly vinylidene fluoride) substrate, were experimentally studied at frequency 6 GHz. During the design of the essential elements of microstrip antenna, EM simulation tool Ensemble V 7.0 is used. We observed the resonant frequency by DC appled electric field in a microstrip patch antenna. This research has been made as an electronically tunable microstrip antenna, taking advantage of the voltage control dielectric substrate and piezoelectric properties substrate. We discuss the effect of substrates, electric field and piezoelectric phenomena in the PVDF microstrip antenna. The antenna frequency can be changed by varying the applied dc voltage. In this paper, we propose, a new technique to agile frequency of the microstrip antenna by using the PVDF piezoelectric substrate.

• Journal of radiological science and technology
• /
• 제23권2호
• /
• pp.33-37
• /
• 2000

The authors fabricated ultrasonic transducer with PVDF[poly(vinylidene fluoride)] piezoelectric polymer film. When impulse waves were applied to the PVDF ultrasonic transducer, the dependence of the response properties on the backing material with copper was investigated through not only theoretical calculations using Mason's equivalent circuit but also experimental measurements. The experimental pulse response properties agree with those of the theoretical calculations and the pulses were shorter than those for a PZT transducer. If such short-pulse properties are used in an medical ultrasonic image diagnosis apparatus, the resolution of the apparatus will be improved. When the insertion loss was calculated theoretically to the PVDF ultrasonic transducer, the frequency characteristics of its showed wideband frequency.

• Proceedings of the Optical Society of Korea Conference
• /
• 한국광학회 2001년도 제12회 정기총회 및 01년도 동계학술발표회
• /
• pp.232-233
• /
• 2001

2차 비선형광학 물질이 높은 응용성을 갖기 위해서는 큰 2차 비선형광학 계수뿐만 아니라 넓은 파장 영역에 걸친 투명성을 가지고 있어야 한다. vinylidene fluoride(VDF)와 trifluoroethylene(TrFE)가 공중합된 f(VDf-TrFE) 공중합체는 이러한 조건을 갖추고 있는 강유전성 물질이다. 우리는 몰비율이 72：28인 P(VDF-TrFE)을 ITO기판위에 casting하고 corona 극화한 뒤, 두 개의 입력 파장(1064nm, 532nm)에 대한 2차 조화파 발생 실험을 실시하고 Herman과 Hayden의 마커무의 식을 이용하여 2차 비선형 광학 계수를 측정하였다. (중략)

• Bulletin of the Korean Chemical Society
• /
• 제30권2호
• /
• pp.319-322
• /
• 2009

Gel polymer electrolytes were prepared by immersing a porous poly(vinylidene fluoride-co-hexafluoropropylene) membrane in an electrolyte solution containing small amounts of polymerizable additive (3,4-ethylenedioxythiophene, thiophene, biphenyl). The organic additives were electrochemically oxidized to form conductive polymer films on the electrode at high potential. With the gel polymer electrolytes containing different organic additive, lithium-ion polymer cells composed of carbon anode and LiCo$O_2$ cathode were assembled and their cycling performances were evaluated. Adding small amounts of thiophene or 3,4-ethylenedioxythiophene to the gel polymer electrolyte was found to reduce the charge transfer resistance in the cell and it thus exhibited less capacity fading and better high rate performance.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.877-878
• /
• 2009

To realize the flexible audible display (FAD), polymer dispersed liquid crystal(PDLC) is deposited on PVDF(Poly-vinylidene fluoride) film with piezoelectric property. With applied audio signal, it makes sound more than 70 dB in 700 Hz-10kHz. In case of transparency it is opaque and transmittance is less than 10% at 550nm wavelength without bias voltage. It is turned to be transparent and show transmittance of 66% with driving voltage of 60V.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• 제27권3호
• /
• pp.184-188
• /
• 2014

The electro-optic properties in Langmuir Blodgett films of poly (vinylidene fluoride trifluoroethylene) are investigated in the crossover region between two and three dimensions. The absence of finite size effect is observed in the films thinner than 20 nm, which confirms that these films are two dimensional ferroelectrics. The copolymer LB film of P(VDF-TrFE) exhibits the largest electro-optic response(26 pm/V) at 10 layer thickness. The cross-over behavior of electro-optic effect around the 10 layer thickness was discussed with the formation of nanomesa after thermal annealing.

• Journal of Electrochemical Science and Technology
• /
• 제9권1호
• /
• pp.1-8
• /
• 2018

The effect of mixing ratio on the corrosion protection of carbon steel coated by a film composed of poly(vinylidene) fluoride (PVDF) and poly(methyl methacrylate) (PMMA) was examined using electrochemical impedance spectroscopy. Surface crystallization behavior and thermal properties of the PVDF/PMMA coated carbon steel were evaluated using polarized optical microscopy and differential scanning calorimetry, respectively. A Maltese cross-pattern spherulite crystal was observed in the PVDF/PMMA coating film, which became more apparent with increasing PVDF content. The highest corrosion protection performance was achieved with 60 wt.% PVDF-coated carbon steel, and delamination and corrosion reactions were observed for 20 wt.% PVDF-coated carbon steel. Further, corrosion protection performance with an amorphous/crystal mixture (PVDF/PMMA, 60/40 (w/w)) was better than those observed in the amorphous domain and the perfect-crystal domain of the PVDF/PMMA blended coating system.