• 한국정보처리학회논문지
• /
• 제1권1호
• /
• pp.73-80
• /
• 1994

푸리에 서술자는 물체의 경계를 표현하는 일반적인 방법이다. 본 논문에서는 이 푸리에 서술자를 이용하여 물체를 인식할 수 있는 알고리즘을 구축하고 실제로 8가지 의 도구들을 구분 인식할 수 있는지를 직접 적용하여 알고리즘의 타당성 검토와 여러 분야에 응용될 수 있음을 추론하였다. 이 알고리즘 구축은 이미지 형성과정과 물체 인식 과정으로 분리하여 생각한다. 이미지 형성 과정은 가능한 인식을 용이하도록 적 절한 조도, 투영시각, 배경과 물체간에 선명한 대비를 이루는 것이 중요하다. 물체 인식과정은 푸리에 서술자와 경계선 매칭을 사용하여 여러 물체 가운데 최소 거리를 산출한 것을 인식한다. 또한 물체가 회전, 위치 변위, 확대 축소 변형에도 인식이 가 가능한지를 시험한다. 인식 과정을 신속히 수행하기 위해 푸리에 서술자 1024개중에 1/4 만을 사용하여 이를 달성한다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.614-615
• /
• 2009

For the high reflectance under the ambient light condition, a highly efficient diffractive reflector has been proposed, based on a micro grating structure.[1] This reflector was designed to show highly concentrated distribution of the reflected light to the normal direction of the reflector under specific incident conditions of the light. In order to apply a diffractive reflector to a reflective liquid crystal display, the coupling between the viewing angle characteristics of a liquid crystal (LC) cell and the reflective distribution of the reflector should be considered. Under the optimum configuration confirmed through the analysis of the coupling between a LC cell and a reflector, a reflective vertical alignment (VA) cell with a diffractive reflector shows contrast ratio and brightness much higher than that with a conventional bumpy reflector.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.271-274
• /
• 1999

In this paper, we studied the matrix type Powder AC Electroluminescence using ZnS:Cu,Cl Phosphor. Previously, Powder AC EL was used in Backlighting of LCD. Rescently, organic Thin Film EL was rapidly developed because of high Luminescence and low applied voltage. But Powder AC EL has Superior features that include sheet like flexibility thickness, low weight, self-emission, a wide viewing angle and a fast response time. We tried to change of phosphor thickness and binder mixture rate in order to obtain the good condition of powder AC EL and we obtained the very low breakdown voltage that was just 15V. Till now, we measured the current-voltage(V-I), luminance-voltage(V-L), Luminance-current (L-I), color coordinate (CIE), and phosphor Intensity of variable thickness. In experiment result, the devices has the luminance of 840 cd/$m^2$ and improved color coordinate, x=0.1557, y=0.2145, using a 10kHz drive frequency.

• 대한기관식도과학회:학술대회논문집
• /
• 대한기관식도과학회 1983년도 제17차 학술대회연제순서 및 초록
• /
• pp.10.4-11
• /
• 1983

현대의학의 발달에 따라 병인을 규명하기 위하여 세밀한 관찰과 자료획득이 가능한 각종 내시경이 대두되기에 이르렀다. 이의 일종인 내시경적 성대경으로 종래에는 보기 힘들었던 병변의 관찰은 물론 사진촬영이 동시에 이루어질 수 있어서 병변의 조기발견과 함께 귀중한 자료가 얻어질 수 있게 되었다. 과거 5년 동안 이화여자대학교 의과대학 부속병원 이비인후과 외래에서 시행한 성대경 사용경험에 따른 장단점과 사진촬영으로 얻은 자료를 중심으로 그 결과를 보고하는 바이다. 1) 간접후두경으로 관찰하기 힘들었던 병변을 보다 명확하게 관찰할 수 있었다. 2) 사진촬영 결과를 환자에게 제시할 수 있어서 치료전후의 상태를 확인시킬 수 있었다. 3) 확대된 성대상을 관찰할 수 있어서 미세한 병변의 감별이 용이하였다. 4) 성대관찰시간이 단축되고 조작이 간편하여 외래에서 사용하기 편리하였다.

• 한국산학기술학회논문지
• /
• 제8권6호
• /
• pp.1376-1380
• /
• 2007

대전입자형 디스플레이는 높은 대조비와 넓은 시야각 그리고 빠른 응답속도를 가졌다. 본 연구에서는 음전하를 띈 노란색 대전입자와 양전하를 띈 검은색 대전입자를 사용하여 화상을 표시하였으며, 기존의 혼합된 대전입자를 충전하는 방식과는 대비 패널의 상판과 하판에 형성된 셀에 두 대전입자를 전계에 의해 각각 어드레싱하였다. 그리고 상판과 하판을 합착한 후 Aging을 하여 패키징을 하였으며, 합착된 패널은 전극 설계에 의해 4 채널의 전극에 Matrix 구동을 했다. 패널에 충전되는 layer 수는 최소 2 layer가 요구되며, 본 연구에서는 대전입자의 layer는 격벽의 높이로 조절하였다. 패키징된 패널의 상판에 양의 전압을 인가한 결과, 노란색 대전입자는 상판의 전극으로 이동하고 검은색 대전입자는 하판의 전극으로 이동하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.74-75
• /
• 2005

Organic Light Emitting Diodes are attractive as alternative display components because of their relative merits of being self-emitting, having large intrinsic viewing angle and fast switching speed. But because of their relatively short history of development, much remains to be studied in terms of their basic device physics and design, manufacturing techniques, stability and so on. We invested electrical properties of N, N-diphenyl-N, N bis (3-methyphenyl)-1, 1'-biphenyl-4, 4'-diamine and tris-8-hydroxyquinoline aluminum when their thickness were changed variedly from 3:7 to 7:3 of their thickness ratios. And we also studied their optimal thickness respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.109-113
• /
• 2005

We have studied a field sequential liquid crystal display (FSLCD) with electrically controlled birefringence (ECB). The ECB mode exhibiting fast response time, high transmittance, low operating voltage and adequate viewing angle. The positive liquid crystal (LC) is better than negative LC on dielectric anisotropy, birefringence and rotational viscosity. Because $K_{11}$ value out of the elastic coefficient of LC is also larger than $K_{22}$ value, decay time of VA-ECB is advantage. However, the transmittance & response time reduced with decreasing the cell gap. This drawback can be overcome by using LC with high ${\Delta}n$ but VA-ECB is occured loss of light efficiency because the $\gamma$ value increased by high ${\Delta}n$ of LC. Consequently, the HA-ECB mode is one of strongest candidate for FSLCD application.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.844-847
• /
• 2003

Display devices are becoming increasingly important as an interface between humans and machines in the growing information society. In display devices, PDP (Plasma Display Panel) has many advantages in that it has wide screen, wide viewing angle and is light weight, thin. In PDP driving method, if the brightness of input image is high, applying the fixed sustain pulse to the PDP panel will raise the PDP power consumption and may damages the PDP panel. To overcome these problems, the Plasma AI driving method was introduced by the Matshushita co. in Japan. The Plasma AI driving module calculates the peak value and average value of 1 frame image and adjusts the gradation and sustain pulses for 1 frame sustain. In this paper, the proposed PDP driving module is based on the Plasma AI driving module. The proposed driving module calculates peak value and average value, and the brightness distribution of 1 frame image. Using brightness distribution, the proposed driving module divides 1 frame input image into 15 image patterns. For each image pattern, minimum sustain pulses and sub-frames are used for the brightness of 1 frame image and the sustain weight for 64, 128, 192 gradation is proposed. Therefore, the sustain power consumption can be reduced.

• 한국정밀공학회지
• /
• 제33권5호
• /
• pp.409-417
• /
• 2016

It is well known that Morpho butterflies show distinctive, brilliant and iridescent colors and have micro-nano scale structures, instead of dyes and pigments, on their wings. This structural coloration is regarded as a novel technique to express color with a long lifetime, ease and precise tenability. Here, we studied optical multilayer thin films with thickness of several tens of nm ($TiO_2$ and $SiO_2$) and lens-shape micro-patterns. Fabrication and characterization of the multilayer stacking structure and the micro-pattern structure were performed and the films were analyzed via several optical measuring techniques. Finally, we discussed how the micro-pattern structure could enhance independence with color changes according to the viewing angle.

• 한국레이저가공학회지
• /
• 제18권1호
• /
• pp.18-22
• /
• 2015

In this paper, controlling shape of optical fiber tip for endoscope was investigated for eliminating blind spot. The blind spot of endoscope is generated by divergence angle of optical fiber, so it is easy to generate blind spot when tightly focusing. In order to eliminate this region, fiber tip is necessary to be controlled as convex or concave. Illumination simulation of convex and concave type of fiber tip in the endoscope was in progress, so the distance of non- blind region was investigated in each case. As well as the simulation, the tip was fabricated as concave shape by UV laser machining. Then the beam radiation was measured to observe the blind region. The result showed that controlling the fiber tip as convex or concave shape makes the narrow blind region of illumination in endoscope.