• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.5
• /
• pp.25-32
• /
• 1998

In this paper, SA (shape adaptive)-DCT is implemented using a datapath with 4 MACs (multiplication & accumulator). DCT is a well-known bottleneck of real-time video compression using MPEG-like schemes. High-speed pipelined MACs presented here implement real-time DCT. A datapath in this paper executes DCT/IDCT algorithms for QCIF 15fps(frame per second), maximum rate of VLBV(very low bitrte video) in MPEG-4. A 32bit accumulator in a MAC prevents distortion caused by fixed-point process. It can be applied to various operations such as ME (motion estimation) and MC(motion compensation) with a absolutor and a halfer.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.5 no.1
• /
• pp.3-8
• /
• 1985

A three dimensional vision is obtained by stereoscopic view using a modified commercial TV set and matching color filter glasses. Two video signals from two CCTV cameras are connected to the RGB (red, green, blue) inputs of picture tube selecting two different colors for two video signals. A synchronizing signal drives a CCTV camera and the color TV set. On the other hand, a delayed synchronizing signal drives the other CCTV camera shifting its image on display. This shift is used in correcting image distortion.

• ETRI Journal
• /
• v.38 no.5
• /
• pp.847-857
• /
• 2016

Broadcasting services such as multi/single channel HDTV and 3DTV/2DTV use a multi-channel encoder that changes the bitrate and composition of the video service depending on the time. However, this type of multi-channel encoder could cause a longer latency owing to the variable bitrate and relatively bigger size of the buffers, which results in the same delay as in 3DTV even for a conventional DTV service. On the other hand, systems built based on separate encoders, each of which is optimized for the target service, might not have such latency problems. Nevertheless, there might be a distortion problem in the image and sound at the time of a switchover between two encoders with different output bitrates and group of picture structures. This paper proposes a system that can realize a seamless video service conversion using two different video encoders optimized for each video service. An overall functional description of the video service change control server, which is a main control block for the proposed system, is also provided. The experiment results confirm the seamless switchover and reduced broadcasting latency of DTV services compared with a broadcasting system composed of a multi-channel encoder system.

• Journal of Broadcast Engineering
• /
• v.16 no.6
• /
• pp.1058-1068
• /
• 2011

Video FRUC (Frame Rate Up Conversion) is one of the main issues that have arisen in recent years with the explosive growth of video sources and display formats in consumer electronics. Most advanced FRUC algorithms adopt an efficient motion interpolation technique to determine the motion vector field of interpolated frames. But, in some application areas such as post processing in receiver side, it is necessary to evaluate how well the MCI (Motion Compensated Interpolation) frame was reconstructed. In order to achieve this aim, first, this paper introduces some cost functions to estimate the reliability of a block in the MCI frame. Then, by using these functions, this paper proposes two distortion estimation models for evaluating how much noise was produced in the MCI frame. Through computer simulations, it is shown that the proposed estimation methods perform effectively in estimating the noises of the MCI frame.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.4
• /
• pp.150-160
• /
• 2008

The present domestic underwater and ocean facilities management depends on analysis with the naked eye. This study performs quantitative analysis to improve conventional methods, analyze spatial situation of underwater facilities. This research is divided into two steps; underwater image distortion correction and image mosaic step. First, underwater image distortion correction step is for the production of underwater target, calculates the correction parameters, and then developed the method that convert the original image point to whose distortion is corrected. Second step is for the obtaining pipe images installed in the underwater, corrects the distortion, and then transforms a coordinates of the correction pipe image. After coordinate transformation, we make the mosaic image using the singularities. As a result, when we measure the distance between pipe and underwater ground and compare with calculation value on mosaic image, it is showed that RMSE is 0.3cm.

• ETRI Journal
• /
• v.29 no.5
• /
• pp.559-568
• /
• 2007

This paper presents a new distortion control scheme with a simple estimation model for the propagation errors incurred by dropping some parts of the bitstream in a frame dropping-coefficient dropping (FD-CD) transcoder. The primary goal of this paper is to facilitate bit-rate conversions and rate-distortion controls in the compressed domain without introducing a full decoding and reencoding system in the pixel domain. First, the error propagation behavior over several frame sequences due to coefficient dropping is investigated on the basis of statistical and empirical properties. Then, such properties are used to develop a simple estimation model for the CD distortion accounting for the characteristics of the underlying coded-frame. Finally, the proposed estimation model allows us to determine the amount of coefficient dropping and to effectively allocate rate-distortions into coded-frames. Experimental results show that the proposed estimation model accurately describes the characteristics of propagation errors adaptively in the compressed domain and can be easily applied to distortion control over different kinds of video sequences.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11a
• /
• pp.280-282
• /
• 2005

In this paper we propose several mapping schemes for streaming video generated by state-of-the-art H.264 codec over IEEE 802.11e enabled wireless LANs. The schemes take advantage of both 802.11e's QoS mechanism and some novel features of the H.264 codec, so as to protect the most important information in terms of visual quality and reduce distortion under network congestion. The proposed methods are evaluated by means of the H.264 reference software codec, network simulation, and objective video quality measurements. Results show that the proposed methods achieve a robust and error resilient H.264 video streaming over wireless LANs than traditional best-effort streaming.

• ETRI Journal
• /
• v.32 no.3
• /
• pp.490-492
• /
• 2010

This letter proposes a robust feature extraction method using a spatially normalized mean for temporal ordinal measurement. Before computing a rank matrix from the mean values of non-overlapped blocks, each block mean is normalized so that it obeys the invariance property against linear additive and subtractive noise effects and is insensitive against multiplied and divided noise effects. Then, the temporal ordinal measures of spatially normalized mean values are computed for the feature matching. The performance of the proposed method showed about 95% accuracy in both precision and recall rates on various distortion environments, which represents the 2.7% higher performance on average compared to the temporal ordinal measurement.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6C
• /
• pp.842-847
• /
• 2004

We present a new video coding technique to tradeoff frame rate and picture quality for low bit rate video coding. We show a model equation for selecting the optimal frame rate from the motion content of the source video. We can determine DCT quantization parameter (QP) using the frame rate and bit rate. For objective video quality measurement we propose a simple and effective error measure for skipped frames. The proposed method enhances the video quality up to 2 ㏈ over the H.263 TMN5 encoder.

• ETRI Journal
• /
• v.32 no.4
• /
• pp.566-576
• /
• 2010

In a multiview video system, interactivity is important for users and should be considered in the design of multiview video coding (MVC). In this paper, we present an interactivity evaluation model for MVC schemes by using both weighted random graph and Markov approaches. The main factors that affect both the interactivity and rate-distortion (RD) performances of MVC schemes are analyzed and discussed in detail. By taking these factors into consideration, a new MVC scheme is proposed for high interactivity and RD gains. Experimental results show that the proposed scheme has a significant interactivity gain with little coding loss, compared to the state-of-the-art benchmark. As an extension to RD performance analysis, the interactivity evaluation model can be used as a design tool of alternative schemes for a future interactive multiview video system.