• 한국정밀공학회지
• /
• 제15권12호
• /
• pp.142-147
• /
• 1998

Developing robot hands with multi-degree-of-freedom is one of the topics that researchers have recently begun to improve the limitation by adding flexibility and dexterity. In this study, an articulated servo-pneumatic robot hand system with direct-drive joints has been developed whose main feature is the minimization of the dimension. The servo-pneumatic system is advantageous to fabricate a dexterous robot hand system due to the high torque-to-weight and torque-to-volume ratio. This enables the design of a finger joint with an integrated rotary vane type actuator which produces high output torque without reduction gears, being very robust. In order to control the servo-pneumatic finger joints, a miniature proportional valve that can be attached to the robot hand is required. In this paper, a flapper nozzle type 4/3-way proportional directional valve has been designed and tested. The experimental results show that the developed valve can control a finger joint satisfactorily without much vibratory joint movements and acoustic noises.

• 한국항공우주학회지
• /
• 제50권7호
• /
• pp.497-505
• /
• 2022

본 연구에서는 회전익기 통합 해석 코드인 CAMRAD II를 이용하여 풍동 시험용 Lift-offset 동축 반전 로터의 성능 및 허브 진동 하중 해석을 수행하였다. 본 논문에서는 전체 로터의 추력을 트림 목표 값으로 사용하는 트림 조건 및 상/하 로터 각각의 추력을 트림 목표 값으로 이용하는 트림조건을 사용하였다. 두 종류의 트림 기법에 대하여 다양한 전진비 및 Lift-offset 값을 고려하여 해석을 수행하였고, 계산된 결과를 선행연구의 풍동 시험 및 해석 결과와 상호 비교하였다. 두 종류의 트림 기법을 이용한 연구 결과에서 모두 다양한 전진비 및 Lift-offset 값에 대하여 상/하 로터 각각의 양력, 토크 및 전체 로터의 로터 유효 양항비가 선행연구의 풍동 시험 결과와 유사함을 확인하였다. 또한 로터의 2P 허브 진동 하중 해석 결과를 기반으로 Lift-offset 동축 반전 로터 허브의 진동 하중 특성을 확인하였다. 본 연구를 통하여 CAMRAD II를 이용한 풍동 시험용 Lift-offset 동축 반전 로터의 모델링 및 해석 기법을 적절히 구축하였으며, 성공적으로 검증하였다.

• Journal of Electrical Engineering and Technology
• /
• 제3권1호
• /
• pp.60-67
• /
• 2008

The vibrations and noise origin in electric material is due to several coupled physical phenomena. The revolving electric machine complete modeling is complex; it does not allow simple parametric machine structure studies for various operation modes. This work presents a simple electromagnetic model which makes possible the machine principal parts flow estimation from flux density. Special interest is given in determining Switched Reluctance Machine (S.R.M) radial acceleration in accordance with the current supply. Our focus will be only on the magnetic origin efforts that are dominating in the S.R.M. The efforts calculation versus the current is presented in the case of a machine with a linearized rate. These efforts are considered as a tangential force producing the torque and a radial force that generates no torque. The application is realized on a 6/4 low power S.R.M type (6 stator teeth and 4 teeth rotor). The mechanical response is substituted in a transfer function. The model takes account of the power supply of the machine, the relation between the current supply and the efforts as well as the vibratory response of the machine to these efforts. Finally, the model is validated by comparison with similar experimental results within the framework of the definite assumptions.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권5호
• /
• pp.626-634
• /
• 1998

Controllable pitch propeller(CPP) is usually adopted for easy and effective engine controls of a ship in a port. Unfortunately the torsional vibration may occur by a certain variation of engine torque and the major resonance peak may exist within the maximum continuous rating(MCR) In these cases an additional stress concentration on the oil passages such as longitudinal slots notches and circular holes of an oil distributor shaft(ODS) occurs by the torsional vibration of the CPP shaft. In this paper an analysis for the fatigue limit of an ODS system of the 5S70MC engine in a crude oil carrier is done by applying FEM and empirical formulas. Furthermore the additional stress on the ODS is investigated by analyzing the torsional vibration of the shaft system and a control method in which a tuning damper is adopted is introduced in the case of the additional stress exceeds the fatigue limit. The validity of analysis method is verified by comparing the results acquired by an actual measurement of the vibratory torque for the above ODS

• 한국소음진동공학회논문집
• /
• 제25권5호
• /
• pp.321-328
• /
• 2015

최근 극지 선박의 수요가 늘어나고 있고 IACS(국제선급연합)에서는 대빙 선박에 대한 새로운 기준이 적용되고 있다. 이 선박에서는 추진시스템에 대한 대빙 설계 기준으로 빙 충격 토크는 프로펠러 날개 수를 중심으로 한 조화 함수로 규정되어 있다. 그러나 실 상황에서는 이러한 주기적인 기진 토크보다는 불규칙한 빙의 충격 토크가 발생할 수 있는 확률이 오히려 크다. 이 논문에서는 비틀림진동이 비교적 큰 6개의 실린더를 갖는 디젤엔진을 주 기관으로 한 추진시스템의 안정성을 검토하고자 한다. 특히 불규칙한 빙 충격 토크와 디젤엔진에서 발생하는 진동토크를 동시에 고려하여 비틀림진동의 공진점을 통과할 과도 비틀림 진동 응답을 이론적으로 해석하였다. 여기서 빙 충격토크는 빙이 프로펠러에 부딪칠 때를 여러 유형별로 가상하여 선급에서 규정된 방법에 의해서 구하였다. 전체적인 시스템의 과도응답 해석은 직접적분방법의 하나인 뉴마크(Newmark) 법을 이용하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.44-50
• /
• 2002

Theoretical analysis on the transient torsional vibration was started from early 1960's for high power synchronous motor application. As for marine engineering, simulation and measuring techniques of transient torsional vibration have been steadily studied by manufacturer of flexible coupling and designer of four stroke marine diesel engine. In this paper, the simulation method of transient torsional vibration for four stroke marine diesel engine application using Newmark method is introduced.

• 선박안전
• /
• 통권21호
• /
• pp.4-14
• /
• 2006

Marine diesel engine production and refinements sought a continuous increase on mean effective pressure and thermal efficiency. These results in increased maximum combustion pressure within the cylinder and vibratory torque in crankshaft. As such, crankshaft should be designed and compacted within its fatigue strength. In this paper, the 8H25/33P(3,155ps 900rpm) engine for ship propulsion was selected as a case study, and the strength analysis of its crankshaft is carried out by: simplified method recommended by IACS M53 and a detailed method with the crankshaft assumed as a continuous beam and bearing supported in its flexibility. The results of these two methods are compared with each other.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.90-95
• /
• 2008

Medium and high speed marine diesel engines have been widely used as prime mover in small car ferries and fishing vessels with reduction gear. These propulsion shafting system should be installed and matched the elastic coupling between engine and reduction gear to isolate the vibratory torque. In this paper, the elastic dynamic characteristics of coupling with rubber type circular segments is confirmed by the theoretical analysis using the FEM and the hydraulic exciting test at shop. And its adaptation is investigated in the torsional vibration test in factory shop.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권3호
• /
• pp.359-368
• /
• 2006

The trend on marine diesel engine productions and refinements has led to a higher mean effective pressure and thermal efficiency. These resulted in increased maximum combustion pressure within the cylinder and vibratory torque in crankshaft. In view of this. the crankshaft should be able to withstand the dynamic stresses caused by load variations. Different factors including size, material and stress concentration factors should also be considered to ensure the reliability of the shafting system. As such, crankshaft must be designed and compacted within its fatigue strength. In this paper, the strength analysis of crankshaft Is carried out by: simplified method recommended by IACS(International Association Classification Societies) M53 and a detailed method with the crankshaft assumed as a continuous beam and bearing supported in its flexibility. The results of these two methods are then compared.

• 한국소음진동공학회논문집
• /
• 제21권4호
• /
• pp.346-351
• /
• 2011

Medium and high speed marine diesel engines with reduction gear have been widely used as prime mover in small car ferries and fishing vessels. The elastic coupling should be installed and complemented the propulsion shafting system to isolate the vibratory torque between engine and reduction gear. In this paper, the dynamic characteristics of elastic coupling with rubber type circular segments is confirmed by theoretical analysis using the FEM and the hydraulic excitation test at shop. Further adaptation was investigated with the torsional vibration test at diesel engine factory shop.