• 대한토목학회논문집
• /
• 제26권3C호
• /
• pp.191-200
• /
• 2006

직경 100~300mm 정도의 보링공에 강봉 또는 강관을 삽입하여 그라우팅 재료로 주입 압력을 가하는 소구경 현장 타설 말뚝의 일종인 마이크로파일 공법은 기계의 소형화, 저진동, 저소음 등의 장점으로 도심지의 협소한 공간에서의 적용 범위가 점차 확대되고 있다. 마이크로파일은 지지력 증가, 지반 변위억제를 통한 구조물 안정성 확보 등에 주로 적용되어져 왔고, 향후 공법의 유효성과 잠재성으로 다양한 방면에 활용될 것으로 예상된다. 본 연구에서는 마이크로파일과 지반과의 상호작용에 초점을 두고 기초의 하부지반(구조물 지지개념) 보강을 실시하였으며, 모형실험 결과 및 지반 변형 분석을 통해서 보강 효과(지지력 증가효과 및 침하억제 효과)를 정성적 정량적으로 분석하여 설계 및 시공에서의 효율성과 적용성을 높이고자 한다.

• Journal of the Korean Wood Science and Technology
• /
• 제18권4호
• /
• pp.65-78
• /
• 1990

For the purpose of Improving the sounding boards for the conventional GAYAKUM, I was making approximately 202 specimens of radial board, 371 specimens of tangential board by cutting along the grain and the part of stem and 31 specimens of the disjointed traditional GAYAKUM made in Paulownia coreana. And it was conducted to measure specific gravity, dynamic Young's modulus, internal friction, resonant frequency, velosity of sound and width of annual ring by the method of the frexural vibration in a free-free bar in the audio frequency range. And it confirmed the juvenile wood by measuring wood fiber length of specimens. It was also conducted to investigate dynamic properties and moisture absorption by various heat-treatment and to test dynamic Young's modulus and internal friction for the disjointed conventional GAYAKUM. The results obtained were summarized as follow: 1. The Juvenile wood is located within about 7 annual rings from the pith in Paulownia coreana. 2. As increased with the specific gravity, the dynamic Young's modulus had more and more increased, but the internal friction had slightly decreased. 3. I think that radial board would be good for sounding board wood. because radial board is higher than tangential board in dynamic Young's mudulus and internal friction is lower than tangential board. 4. The value of mean dynamic Young's modulus on the conventional GAYAKUM, radial board and tangential board of 604 samples is $0.4283\pm0.037(\times10^{11}dyne/cm^2)$, $0.4316\pm(\times10^{11}dyne/cm^2)$ and $0.4234\pm0.112(\times10^{11}dyne/cm^2)$ respectively. The value of the radial board showed little higher than that of conventional GAYAKUM, but It had a similar tendency between conventional GAYAKUM and tangential board. 5. The annual ring width by four aspect is more narrow in north and west than that of others. 6. The values of specific gravity and dynamic Young's modulus in the mature wood showed higher than those of juvenile wood. 7. As the grain angle in the butt wood more increased to bark from pith, the dynamic Young's modulus were low. Then it was not good for sounding board. 8. It appeared that the heat-treatment for sounding board wood had a more effect to do the treatment of hotiron on surface after heat-treatment during 24 hours in $60^{\circ}C$ temperature. 9. As increased with the temperature, the rate of moisture absorption of heat-treatment wood had decreased. In conclusion, I thought that the sounding board wood for GAYAKUM would had the most effect to do the treatment of hotiron on surface after heat-treatment during 24 hours in $60^{\circ}C$ temperature using the radial board of mature wood.

• Structural Engineering and Mechanics
• /
• 제91권1호
• /
• pp.75-86
• /
• 2024

In this paper, the porous metal PM-35 is proposed as the filler material of filled thin-walled tubes (FTTs), and a series of experimental study is conducted to investigate the dynamic behavior and energy absorption performance of PM-35 filled thin-walled tubes under impact loading. Firstly, cylinder solid specimens of PM-35 steel are tested to investigate the impact mechanical behavior by using the Split Hopkinson pressure bar set (SHP); Secondly, the filled thin-walled tube specimens with different geometric parameters are designed and tested to investigate the feasibility of PM-35 steel applied in FTTs by the orthogonal test. According to the results of this research, it is concluded that PM-35 steel is with the excellent characteristics of high energy absorption capacity and low yield strength, which make it a potential filler material for FTTs. The micron-sizes pore structure of PM-35 is the main reason for the macroscopic mechanical behavior of PM-35 steel under impact loading, which makes the material to exhibit greater deformation when subjected to external forces and obviously improve the toughness of the material. In addition, PM-35 steel core-filled thin-wall tube has excellent energy absorption ability under high-speed impact, which shows great application potential in the anti-collision structure facilities of high-speed railway and maglev train. The parameter V0 is most sensitive to the energy absorption of FTT specimens under impact loading, and the sensitivity order of different variations to the energy absorption is loading speed V0>D/t>D/L. The loading efficiency of the FTT is affected by its different geometry, which is mainly determined by the sleeve material and the filling material, which are not sensitive to changes in loading speed V0, D/t and D/L parameters.

• 재활복지
• /
• 제22권3호
• /
• pp.225-257
• /
• 2018

본 연구의 목적은 청각장애인이 경험하는 위험상황과 청각 대체기술로 사용하는 보조기기 사용실태를 조사하여 청각증강 기술 개발의 적용점을 모색하는 데 있다. 이를 위해 청각장애 등급을 판정받은 청각장애인을 대상으로 설문조사하여 총 355명의 자료를 분석에 사용하였다. 연구결과 첫째, 소리 및 진동을 인지한 경험이 없는 상황으로 교통수단, 사물, 자연 영역 순으로 높게 나타났다. 이 중 교통수단의 소리와 진동을 인지하지 못한 비율이 높아 일상생활에서 청각장애인이 경험하는 위험 가능성이 높은 것으로 조사되었다. 둘째, 청각장애인이 경험한 위험상황은 교통사고, 보행사고, 가정에서의 일상생활 순으로 높게 조사되었다. 셋째, 위험상황 인식과 알림을 위한 보조기기로 2G폰/스마트폰, 진동디지털알람시계, 경광등, 진동손목시계의 인지도가 높았으며, 2G폰/스마트폰의 만족도가 가장 높았다. 넷째, 의사소통을 위한 보조기기로 보청기, 스마트폰, 영상전화기, 인공와우, 2G폰 순으로 인지도가 높았으며, 스마트폰을 사용하였을 경우 만족도와 의사소통 개선정도가 가장 높게 조사되었다. 마지막으로 청각증강 기술 개발을 위해 고려할 점으로 휴대/착용 편의성, 가격, 동작 정확도 순으로 선호하였으며, 알림 전달 방식은 시각(문자와 빛)을 활용한 알림방식을 선호하였다. 연구결과에 근거하여 위험상황에서 청각장애인의 청각증강 기술 개발을 위한 정책적, 실천적 방안을 제시하였다.