• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1268-1271
• /
• 2006

This paper introduces what amount of railway vibration level observed from residential area. Five residential area located near the railway were selected to measure the vibration levels generated by the different types of Korean railway vehicles. Those 3-axis vibration measurements are applied to the frequency-dependent weighting functions recommended by ISO 2631-2, which are used to evaluate the 3-axis combined vibration levels such as peak levels, L 10 levels and root-mean-squared values. These evaluated results are shown to indicate the environmental vibration severity for the different residential area. In addition to those physical vibration measurements, the survey of subjective responses of residents was also carried out by distributing the questionnaire suggested by WHO. The questionnaire includes the subjective scales for assessing the annoyance and the sleep-disturbance caused by the environmental vibration. The statistical analysis results collected from 386 respondents are introduced. The highly annoyed population and the highly sleep-disturbed one are examined to identify the .elation between their subjective scale and their corresponding environmental vibration levels. These attempts are shown to lead to the salient model to relate the environmental vibration level and the subjective responses of Korean residents to annoyance and sleep-disturbance.

• 소음진동
• /
• 제7권1호
• /
• pp.117-125
• /
• 1997

The aim of this research is to measure the damage caused by the vibrations of passing trains. In order to determine the vibration levels of the trains, twelve points along the Honam, Cholla and Kyungjun lines were chose. There are two goals to be achieved from the data gathered. The first is to determine whether or not the trains are operating under governmentally determined levels. The second goal is to establish countermeasure in order to minimize the effects of the vibrations on the people who live near the train lines. A vibration level meter was used to measure the vibration levels at all twelve points at times when no trains were travelling and at times when trains were travelling. As a result, it was found that Saemaeulho and Mugunghwaho, had a higher vibration level of 2 - 3 dB than Pidulgiho and freight trans. There were no relationship between speed and vibration level. The vibration levels did change according to capacity and size of the engine. In such cases there was a difference of 2 - 7 dB. Where vibration proof ditches were in place, the vibration level were decreased by 3 - 6 dB. The practical decreases in vibration levels was similar to the theoretical decreases.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.178-185
• /
• 2012

In Korea, researches on the exposure assessment of the hand-transmitted vibration started from the mid-90, however, they were performed in the limited industries such as auto-assembly plants and the evaluation of the vibration was mostly conducted by ISO 5349(1986). Therefore, it was necessary to assess hand-transmitted vibration levels of workplace such as ship building/repairing industry or mining industry where occupational injuries are largely occurred and to evaluate the vibration levels using revised ISO 5349(2001). The SVAN 949 Four Channels Sound & Vibration Analyser was used for the measurement. The workers using a chain saw were exposed to $1.7{\sim}2.8m/s^2$ of daily vibration level. Workers using a rock drill in a coal mining were exposed to the highest vibration acceleration among workers and the levels were $7.1{\sim}10.8m/s^2$. Vibration levels of grinders were different according to the types of grinders. The hand-transmitted vibration of 3 types of grinders were measured and the levels were $3.3{\sim}11.1m/s^2$. Workers using a impact wrench were exposed to $1.5{\sim}1.6m/s^2$ of vibration. Out of 20 kinds of machines, only 4 tools provided the information of vibration acceleration on the instructions. In addition, the current condition of workplaces to control vibration was not much different from the past because there are no vibration exposure limit.

• 한국소음진동공학회논문집
• /
• 제22권10호
• /
• pp.940-948
• /
• 2012

In Korea, researches on the exposure assessment of the hand-transmitted vibration started from the mid-90, however, they were performed in the limited industries such as auto-assembly plants and the evaluation of the vibration was mostly conducted by ISO 5349(1986). Therefore, it was necessary to assess hand-transmitted vibration levels of workplace such as ship building/repairing industry or mining industry where occupational injuries are largely occurred and to evaluate the vibration levels using revised ISO 5349(2001). The SVAN 948 Four Channels Sound & Vibration Analyser was used for the measurement. The workers using a chain saw were exposed to 1.7~2.8 $m/s^2$ of daily vibration level. Workers using a rock drill in a coal mining were exposed to the highest vibration acceleration among workers and the levels were 7.1~10.8 $m/s^2$. Vibration levels of grinders were different according to the types of grinders. The hand-transmitted vibration of 3 types of grinders were measured and the levels were 3.3~11.1 $m/s^2$. Workers using a impact wrench were exposed to 1.5~1.6 $m/s^2$ of vibration. Out of 20 kinds of machines, only 4 tools provided the information of vibration acceleration on the instructions. In addition, the current condition of workplace to control vibration was not much different from the past because there are no vibration exposure limit.

• 한국포장학회지
• /
• 제12권1호
• /
• pp.21-25
• /
• 2006

Measurements of accelerometer levels transmitted from the floor in commercials truck shipments were carried out transportation of 300 Kg-load from Gyungbu Highway(Waegouan-Seoul) to 88 Highway(Gwangju-Daegu). Different characteristics were observed the values measured the vibration levels with directions in the two Highway's as a function of road condition and truck speed. The results showed that the vibration levels of the Gyungbu Highway is much higher than those of the 88 Highway. A following analysis on the obtained values was used to get the acceleration spectral density (ASD) and power spectral density (PSD). For the entire transit route, the results showed that the level of vibration to vertical direction was significant effects for damaging the products carried compared to other directions such as longitudinal and transverse. This paper provides an updated history of measured characteristics of vibration levels for highways using mainly in domestic area.

• Smart Structures and Systems
• /
• 제24권4호
• /
• pp.525-539
• /
• 2019

In this study, vibration characteristics of a gravity-based caisson-foundation breakwater system are investigated for ambient and geometric parameters such as various waves, sea levels, and foundation conditions. To achieve the objective, following approaches are implemented. Firstly, operational modal analysis methods are selected to identify vibration modes from output-only dynamic responses. Secondly, a finite element model of an existing caisson-foundation breakwater system is established by using a structural analysis program, ANSYS. Thirdly, forced vibration analyses are performed on the caisson-foundation system for two types of external forces such as controlled impacts and wave-induced dynamic pressures. For the ideal impact, the wave force is converted to a triangular impulse function. For the wave flow, the wave pressure acting on the system is obtained from wave field analysis. Fourthly, vibration modes of the caisson-foundation system are identified from the forced vibration responses by combined use of the operational modal analysis methods. Finally, vibration characteristics of the caisson-foundation system are investigated under various waves, sea levels, and foundations. Relative effects of foundation conditions on vibration characteristics are distinguished from that induced by waves and sea levels.

• Journal of Nutrition and Health
• /
• 제9권4호
• /
• pp.11-18
• /
• 1976

In this third report influence of vibration on growth and on some metabolism of young growing rats fed on varying levels of protein was investigated. Forty eight (48) young growing male rats weighing about 60 grams were used, grouping to four (4) groups, twelve (12) rats each group. They were fed on 8%, 13%, 19%, and 26% casein diet respectively (See the table 1) for the period of 10 weeks experiment. During the experimental period the half number of the rats of each group were subjected to a given degree of vibration for two (2) hours daily. Observations for growth rate, food and protein efficiency ratios, organs development, cholesterol levels in aorta, total nitrogen, urea nitrogen and creatinine levels in urine may be summarized as follows 1. Growth was impaired by the vibration in all groups including 26% easein diet. 2. There is tendeney that in higher protein diets, the organs (See table 3) developed more well. And also the impairment of the organs development by the vibration revealed less in higher protein diets. 3. Food and protein efficiency ratios were generally decreased under vibration and the food efficiency was improved by increasing the protein level in diet. 4. Total and free cholesteral levels in aorta were increased by the vibration. Ester from/tatal ratio was 17.7% and 17.3% respectively at 8% and 13% protein diets and 54.8% and 54.2% at 19% and 26% protein diets. These show that, in higher protein diets, the vibration doesn't influence the cholesterol ratio. 5. Total nitrogen, urea nirogen and creatinine levels in urine were increased by increasing the protion level in diet and also increased by the vibration. 6. It seems that, according to the above observations, the vibration used in this experiment influenced, in certain extent, on physical development, physiological availability of nutrients, and on body metabolism. And it is also thought that higher protein diets act some good role in protecting body from suffering from vibration.

• 터널과지하공간
• /
• 제10권3호
• /
• pp.486-491
• /
• 2000

발파 진동은 보통 지반진동속도로 계측되며, 발파설계나 구조물의 피해 산정에 적절하게 사용된다. 그러나 발파 진동에 의한 인체의 반응이나 가축의 피해 산정 등의 문제에서는 현행 소음진동규제법에서 명시하는 바, 인체의 감각적 감응척도에 충실한 진동레벨을 주로 사용하므로 변환문제가 발생한다. 본 연구에서는 발파 진동 계측기기로 계측한 데이터를 디지털 필터로 처리하여, 진동레벨로 변환하는 프로그램을 개발하고, 이를 단순조화진동과 실제 발파계측결과에 적용하였다. 그 결과, 단순조화진동은 물론이고 국내에서 널리 사용되고 있는 Instantel Inc.의 Blastmate series에서 계측된 진동데이터도 정밀도 높은 진동레벨로 변환이 가능하였다. 비슷한 정밀도로 계측결과를 ASCII file로 송출할 수 있는 기종에서 계측된 자료도 같은 정도로 처리할 수 있을 것으로 판정되었다.

• 한국암반공학회:학술대회논문집
• /
• 한국암반공학회 2000년도 암반공학문제의 수치해석(Numerical Analysis in Rock Engineering Problems)
• /
• pp.241-246
• /
• 2000

발파 진동은 보통 지반진동속도로 계측되며, 발파설계나 구조물의 피해 산정에 적절하게 사용된다. 그러나 발파 진동에 의한 인체의 반응이나 가축의 피해 산정 등의 문제에서는 현행 소음진동규제법에서 명시하는 바, 인체의 감각적 감응척도에 충실한 진동레벨을 주로 사용하므로 변환문제가 발생한다. 본 연구에서는 발파 진동 계측기기로 계측한 데이터를 디지털 필터로 처리하여, 진동레벨로 변환하는 프로그램을 개발하고, 이를 단순조화진동과 실제 발파계측결과에 적용하였다. 그 결과, 단순조화진동은 물론이고 국내에서 널리 사용되고 있는 Instantel Inc.의 Blastmate series에서 계측된 진동데이터도 정밀도 높은 진동레벨로 변환이 가능하였다. 비슷한 정밀도로 계측결과를 ASCII file로 송출할 수 있는 기종에서 계측된 자료도 같은 정도로 처리할 수 있을 것으로 판정되었다

• 소음진동
• /
• 제9권1호
• /
• pp.25-32
• /
• 1999

Ground vibrations induced from road were investigated to get the basic data that can be used to prepare countermeasures for environmental vibration problems. Vibration levels were measured simultaneously at three points in double distances from road. These data were analyzed with the type of vehicles. roads, media to understand the magnitudes and characteristics of distance attenuation of road vibrations. Vibration levels recorded on tapes were analyzed to understand the characteristics of frequency of road vibration. The range which could be influenced by the road vibration was estimated to take into account the mean of$L_{max}$ and distance attenuation of vibration level 5 m from roadside.