• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.6-12
• /
• 2010

철도소음은 공기역학적 소음, 차륜과 레일의 상호작용에 의한 전동소음과 고가구조음으로 나눌 수 있다. 열차의 속도한계에 의해 재래철도의 주소음원은 전동음이라고 알려져 있으며, 전동음에 대한 많은 연구가 이루어졌다. 또한 전동음을 주소음원으로 하여 철도소음에 대한 예측모델을 제시하고, 철도소음의 전파특징에 대한 연구가 다수 이루어졌다. 또한 근래에는 고가선로에 대한 고가진동음에 대한 연구가 진행되고 있다. 한편, 본 연구에서는 국내 고가철교에 거의 설치되어 있지 않은 방음터널에 대한 효과를 파악하고 앞으로 설치가 예상되는 고가철교 방음터널에 대한 설계 자료를 확보하기 위한 기초연구를 수행하였다.

• 화약ㆍ발파
• /
• 제22권2호
• /
• pp.13-20
• /
• 2004

도심지 굴착과 같은 환경적 제약과 사회적 문제가 존재하는 현장에 대하여. 암반제거작업에 있어서 가장 경제적이고 효율적인 발파공법을 적용하기 위해서, 본 연구는 기존의 발파방진기술인 Line Drilling과 Presplitting의 상점을 살리면서, 단점을 보안한 새로운 발파방진 기술인 NPS(New Presplitting)발파법의 효과에 대하여 연구하였다. NPS 발파법의 분석은 안산암과 화강암, 화강편마암의 3종류의 암반을 대상으로 NPS 발파법의 열수를 1열, 2열, 3열, 4열을 적용하여 발파로 인한 진동을 NPS 발파법의 적용전과 후의 발파진동값을 기준으로 NPS 발파법의 전, 후 진동감쇠 효과를 비교하고, 동일 조건을 가정한 경제성을 살펴보았다. 그 결과 NPS 발파법의 3가지 암석에 대한 현장적용 결과 암종에 따른 NPS 발파공법의 진동감쇠효과의 변화보다, NPS 발파법의 적용 pattern에 대한 진동감쇠효과의 변화가 크게 나타났으며 NPS 발파공열이 2열일 때 감쇠범위는 40％∼80％로 가장 효율적으로 나타났으며 3열과 4열의 경우에도 진동감쇠효과는 있으나 그 효율이 크게 향상되지 않을 뿐 아니라 2열에 비하여 경제적으로 불리함을 알 수 있었다. 또한 NPS 발파법은 보안물과의 거리가 가까울수록 더 경제성이 큰 것으로 분석되었다.

• 한국기계가공학회지
• /
• 제17권4호
• /
• pp.113-122
• /
• 2018

A hydraulic breaker is an attachment of an excavator, and it crushes stones. Recently, research to reduce the impact and noise of breakers are ongoing. In this paper, a method to improve the upper, lower, and side dampers, which act as insulation for the attenuation of vibration during breaker operation, is studied through testing and simulation. To obtain the nonlinear material constants required for the simulation, the biaxial tensile test was performed with urethane, which is a material used for dampers. The existing parts and the improved parts were compared and evaluated using the LS-DYNA program. As a result, 50% of the equivalent stress was reduced in the bracket body of the hydraulic breaker, and the equivalent stress of the side damper was also decreased. We verified that the fatigue conditions were satisfied by performing a fatigue analysis.

• Journal of Magnetics
• /
• 제18권4호
• /
• pp.391-394
• /
• 2013

In this study, nickel-zinc ferrite nanoparticles, with the chemical formula of $Ni_{0.3}Zn_{0.7-x}Cu_xFe_2O_4$ (where x = 0.1- 0.6 by step 0.1), were fabricated by the sol-gel method. The effect of copper substitution on the phase formation and crystal structure of the sample was investigated by X-ray diffraction (XRD), thermo-gravimetry (TG), differential thermal analysis (DTA), Fourier transform infrared spectrometry (FT-IR), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The XRD result shows that due to the reduction of Zn content,the crystallite size of the sample increased. The results of the vibration sample magnetometer (VSM) exhibit an increase in saturation magnetization value (Ms) for samples with x ${\leq}$ 0.3 and a linear decrease for samples with x > 0.3. The variation of saturation magnetization and coercivity of the samples were then studied.

• 대한조선학회지
• /
• 제27권1호
• /
• pp.73-83
• /
• 1990

본 연구에서는 축대칭 전단 유동이 추진기면에 유입될 때의 유효반류 계산 방법을 다루었다. 이는 효율적인 추진기 설계와 추진기에서 발생하는 소음의 감소를 위해 선행되어야 할 분야이다. 계측된 공칭반류를 수학적으로 모델링하고 추진기면은 작동원판으로 이상화하여 선형 운동량 이론에 의해 문제를 정식화하였다, 이에 의해 전단 유동이 고려된 축방향 유효반류를 계산하는 전산프로그램을 개발하였으며 계산된 결과를 실험치 및 Huang 등의 계산 결과와 비교하였다. 계산결과 전단 유동의 영향은 허브로 갈수록 크게 나타났으며 유효반류는 추력 계수가 크고 허브에 가까울수록 다른 결과와 차이를 보이나 추력 계수가 작거나 허브에서 멀어질수록 잘 일치하고 있었다.

• 전력전자학회논문지
• /
• 제20권5호
• /
• pp.429-436
• /
• 2015

Torque ripples generate mechanical vibration at low speed and acoustic noise at high speed. The back emf harmonics of a PM synchronous motor is one of the main sources of torque ripples. To reduce torque ripples resulting from back emf harmonics, dq-axis harmonic currents that reduce the torque ripples are generally compensated to the current controller. Harmonic current compensation is effective at low speed, but it is not applicable at high speed because of the limited bandwidth of the current controller. In this study, dq-axis harmonic voltage compensation that can reduce torque ripples at high speed is proposed. The dq-axis harmonic voltages are calculated from the motor speed and the dq-axis harmonic currents. The effectiveness of the proposed method in reducing torque ripple is verified by a simulation and experiments.

• Journal of Electrical Engineering and Technology
• /
• 제6권5호
• /
• pp.671-676
• /
• 2011

A multilayer square-type piezoelectric transformer with a hole at the center was investigated in this paper. Temperature distribution at the center was improved by using this construction, therefore increasing input voltage and output power. This model was simulated and investigated successfully by applying a finite element method (FEM) in ATILA software. An optimized structure was then fabricated, examined, and compared to the simulation results. Electrical characteristics, including output voltage and output power, were measured at different load resistances. The temperature distribution was also monitored using an infrared camera. The piezoelectric transformer operated at first radial vibration mode and a frequency area of 70 kHz. The 16 W output power was achieved in a three-layer transformer with 96% efficiency and $20^{\circ}C$ temperature rise from room temperature under 115 V driving voltage, 100 ${\Omega}$ matching load, $28{\times}28{\times}1.8mm$ size, and 2 mm hole diameter. With these square-type multilayer piezoelectric transformers, the temperature was concentrated around the hole and lower than in piezoelectric transformers without a hole.

• Structural Engineering and Mechanics
• /
• 제83권4호
• /
• pp.537-549
• /
• 2022

In this paper, a novel multi-feature model predictive control (MPC) framework with real-time and adaptive performances is proposed for intelligent structural control in which some drawbacks of the algorithm including, complex control rule and non-optimality, are alleviated. Hence, Linear Programming (LP) is utilized to simplify the resulted control rule. Afterward, the Whale Optimization Algorithm (WOA) is applied to the optimal and adaptive tuning of the LP weights independently at each time step. The stochastic control rule is also achieved using Kalman Filter (KF) to handle noisy measurements. The Extreme Learning Machine (ELM) is then adopted to develop a data-driven and real-time control algorithm. The efficiency of the developed algorithm is then demonstrated by numerical simulation of a twenty-story high-rise benchmark building subjected to earthquake excitations. The competency of the proposed method is proven from the aspects of optimality, stochasticity, and adaptivity compared to the KF-based MPC (KMPC) and constrained MPC (CMPC) algorithms in vibration suppression of building structures. The average value for performance indices in the near-field and far-field (El earthquakes demonstrates a reduction up to 38.3% and 32.5% compared with KMPC and CMPC, respectively.

• Steel and Composite Structures
• /
• 제21권2호
• /
• pp.249-266
• /
• 2016

The interest of this article lies in the proposition of using bionic method to develop a new sound absorber and analyze the efficient of this absorber in a ski cabin. Inspired by the coupling absorption structure of the skin and feather of a typical silent flying bird - owl, a bionic coupling multi-layer structure model is developed, which is composed of a micro-silt plate, porous fibrous material and a flexible micro-perforated membrane backed with airspace. The finite element simulation method with ACTRAN is applied to calculate the acoustic performance of the multi-layer absorber, the vibration modal of the ski cabin and the sound pressure level (SPL) near the skier's ears before and after pasting the absorber at the flour carpet and seats in the cabin. As expected, the SPL near the ears was significantly reduced after adding sound-absorbing material. Among them, the model 2 and model 5 showed the best sound absorption efficiency and the SPL almost reduced 5 dB. Moreover, it was most effctive for the SPL reduction with full admittance configuration at both the carpet and the seats, and the carpet contribution seems to be predominant.

• 디지털콘텐츠학회 논문지
• /
• 제18권5호
• /
• pp.989-994
• /
• 2017

본 논문은 2D 라이다를 이용해서 포트홀을 검출하는 시스템과 알고리즘을 제안한다. 기존의 포트홀을 검출하는 방법에는 진동, 3D 복원, 영상, 명암을 기반으로 한 방법이 있다. 제안하는 포트홀 검출 시스템은 저가형 LiDAR 두 개를 이용하여 포트홀 검출성능을 개선한다. 포트홀 검출 알고리즘은 LiDAR를 통해 얻은 데이터의 노이즈를 제거하기 위한 전처리과정, 시각화를 위한 클러스터링과 선분추출, 포트홀 검출을 위한 기울기 함수를 구하는 단계로 나뉜다. 기울기 함수를 통해 추출된 데이터의 특징점을 찾아내어 포트홀 여부를 검사하고 포트홀의 깊이와 폭을 측정한다. 2개의 라이다를 활용한 포트홀 검출 시스템을 개발하고, 라이다 장치를 이동하면서 포트홀을 검출함으로써 2D LiDAR를 이용한 3차원 포트홀 검출 시스템의 성능을 보인다.