• 대한토목학회논문집
• /
• 제9권1호
• /
• pp.71-78
• /
• 1989

본(本) 논문(論文)은 주거(住居) 및 상가구조물(商街構造物)이 밀집(密集)된 지역(地域)에서 구조물(構造物)의 말뚝기초공사(基礎工事)를 위한 항타작업시(抗打作業時) 야기되는 지반진동(地盤振動)의 영향(影響)을 평가(平價)하기 위해서 디젤해머로 PC콘크리트말뚝을 항타(抗打)하는 동안 발생(發生)되는 지반진동(地盤振動)을 항타지점(抗打地點)으로부터 진동측정거리(振動測定距離)를 변경시키면서 측정(測定) 분석(分析)하였다. 본(本) 논문(論文)의 측정(測定)과 분석(分析)을 통하여 항타진동(抗打振動)의 감소(減素) 및 주파수특성(周波數特性)이 파악되었으며, 이로부터 항타진동(抗打振動)의 크기를 사전(事前)에 예측(豫測)할 수 있는 진동추정식(振動推定式)의 유도 및 항타기(抗打機) 선정(選定)을 비롯한 제반문제에 대하여 고찰(考察)하였다.

• 대한기계학회논문집
• /
• 제14권2호
• /
• pp.339-348
• /
• 1990

Techniques which are able to predict and control dynamic characteristics, not affecting the vibrational characteristics on the modification of structural design, are being studied. As one of these techniques, experimental modal analysis is widely applied by many researchers. In this study, modal analysis is performed using transfer matrix method by a macro computer. The developed program would estimate the structural modal parameters precisely, and the validity of this program is certified by comparing with the experimental results of .GAMMA A. structure. Estimated modal parameters(natural frequency, vibrational mode, equivalent mass, etc.) are in accord with the experimental results. Also, the optimal location of the additive mass is determined by the evaluation of the vibrational mode and the equivalent mass. The relation between the additive mass and the equivalent mass is specified, and we come to know that the ratio of equivalent mass to additive mass alter linearly within the range of 20%.

• 대한기계학회논문집B
• /
• 제40권5호
• /
• pp.313-319
• /
• 2016

액체가 부분적으로 채워져 있는 용기에서 발생하는 슬로싱 현상을 이해하고 이를 효과적으로 제어하는 것은 매우 중요하다. 선행 연구들이 대부분 사인파형(sinusoidal) 가진에 의한 슬로싱 및 공진 현상에 관심을 가진 반면, 본 연구에서는 산업 현장에서 액체 용기를 빠르게 이송시킬 때 발생하는 슬로싱을 이해하고 억제하고자 하였다. 즉, 사각 용기를 수평방향으로 빠르게 이송시킬 때 발생하는 2상 유동을 수치해석으로 구한 후, 용기의 속도 프로파일(특히 가속 및 감속 시간)이 슬로싱에 미치는 영향을 분석하였다. 그 결과 용기의 가감속 시간이 1차 모드 고유주기의 정수배가 될 때 슬로싱이 상당히 억제되는 것을 관찰하였고, 이는 슬로싱 억제 방안으로 활용될 수 있을 것으로 기대된다.

• Earthquakes and Structures
• /
• 제7권6호
• /
• pp.1171-1186
• /
• 2014

Damping is one of the parameters that control the performance of structures when they are subjected to seismic, wind, blast or other transient shock and vibration disturbances. By adding supplemental viscous dampers, the energy input from a transient deformation is absorbed, not only by the structure itself, but also by the supplemental dampers. The aim of this study is to evaluate the values of both damping and ductility reduction factors for steel moment resisting frames with supplemental linear viscous dampers. Two-dimensional finite element models have been established for a range of low to mid rise buildings with different parameters: number of floors; number of bays; and number of dampers with different supplemental damping ratios (from 5% to 30%). A parametric study has been performed using time history analyses and a well-documented research method (N2-method). In addition, an equation has been proposed for each reduction factor based on regression analysis for the obtained results. The results of the Time history analyses are compared with those of a modified N2-method. Moreover, a comparison with values specified in the European code EC8 and the Egyptian code ECP-201 has been performed.

• The Journal of the Acoustical Society of Korea
• /
• 제16권3E호
• /
• pp.50-55
• /
• 1997

Based on the anthropometric data of Korea male adults, a head and torso simulator(HATS) is constructed to measure its head related transfer functions (HRTFs) which can be used for three dimensional (3-D) sound localization. The HRTFs binaural impulse responses, are measured in an anechoic chamber using a burst maximum length sequence (MLS) signal of 65,535 samples and 32,768 samples acquisition at the sampling rate of 75.47kHz. Also measured are the impulse responses of a driving loudspeaker and some headphones for sound reproduction to get the exact HRTF of the HATS-alone. Through a post-processing procedure, the impulse-version HRTFs at the sampling frequency of 44.1 kHz, which have filter lengths of 512 points, are finally obtained. As an application of the measured HRTFs, a 3-D sound processor for headphone reproduction has been developed. The signal intervals to be processed can be selected and each interval is manipulated to have its diretionality and distance information by using corresponding HRTF and energy control.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.299-303
• /
• 2001

In this paper, we introduce the Partial Half-Through Type Plate Girder Bridge proposed by Hyundai Development Co. and KRTC Consortium in Turn-Key Based design last year, and this type of bridge may be adapted to the railway bridge under similar conditions. This bridge across the North Han River was to be concerned its find view and the protection of water source. For its location is inside the dam, it required the long span and the clearance for the flood also. Its new composite section was able to diminish the deflection and vibration. Its shop-fabrication could control its quality easily, and might to be launched. This structural type have satisfied its functions, construction situations, and overall safeties, so this is the field-oriented type. However the composition and connections of the proposed members are different to the recent forms, and difficult to be applied to present specifications. Therefore it requires a certification on the application for more safety by not only analytical verifications but also experimental studies. Nevertheless, this type of bridge may have some more applications from now on.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.133-138
• /
• 2010

This paper describes on aerodynamic characteristics of pantograph system for Next generation high speed train(HEMU-400). The pantograph which supports electric power is located on the roof. Because of this, it generate high drag, severe acoustic noise and vibration which induced unstable flow due to complex configuration. Therefore, the design of high efficient pantograph needs to increase operational speed. In this research, wind tunnel tests were performed to design a high efficient pantograph system using 1/4 scaled model which were KTX-II pantograph, single arm pantograph and periscope type pantograph with square cylinder shape panhead and optimized shape panhead. For real operational condition, flow directions were adapted by rotation of pantograph. From this results of wind tunnel, it is checked that the pantograph with optimized panhead and single arm type or periscope type has better aerodynamic performance. In addition, lift control device and spoiler in pantograph were tested to investigate the validity of application.

• 화약ㆍ발파
• /
• 제21권3호
• /
• pp.1-10
• /
• 2003

터널굴착발파공법의 하나인 V-cut발파공법은 터널굴착기술이 발전되는 과정에서 초기에 개발되어진 기술이나 작업의 간편성과 효율성으로 인하여 많은 터널굴착공사에서 이용되고 있는 발파공법이다. V-cut발파공법은 일자유면 상태에서 V형으로 심발공을 발파하고 심발공에 의해 형성된 자유면을 이용하여 확대공으로 굴착공간을 넓히는 발파 방법이며 심발발파의 굴진장에 의해 단일발파당 굴진장이 결정된다. V-cut발파법이 개발된 이래 V-cut발파의 굴진장을 증대시키기 위한 방법으로 심발발파공의 구속저항을 감소시키기 위해 보조심발공을 발파하여 형성된 자유면에 의해 심발공의 최소저항선거리를 줄여 발파하였으나 심발공의 구속저항이 감소되지 않아 발파효율이 증대되지 않았으며 발파진동 또한 가장 크게 발생하였다. 이와 같은 현상은 최소저항선거리의 감소효과에 대한 발파기술상의 이론에 문제가 있기 때문이다. 본 연구에서는 V-cut발파법의 심발공에 대한 구속저항감소효과가 발현될 수 있는 조건들을 검토하여 최소저항선거리의 감소효과가 발현될 수 있는 조건을 제시 하여 심발공의 발파효율을 증대시키고 발파진동이 적어지는 발파방법을 제안하려 한다.

• 소음진동
• /
• 제9권1호
• /
• pp.184-188
• /
• 1999

Noise regulation of heavy construction machinery is getting stricter： 3 dB per every 4 year in European community. To meet this requirement many engineers have adopted the enclosing structures with thick absorbing materials and small opening, This increases internal temperature of the enclosure which have engine systems such as electric equipment that are vulnerable to heat, and engine block and muffler that can be regarded as heat sources. So noise control engineers have to consider a coupling problem: combining heat balance and noise reduction. This paper describes this approach by introducing simple heat transfer theory and SEA. The enclosing system of the loader whose enclosing structure consists of two rooms is investigated to show the validity of this method. The results represent that the simple heat transfer theory can be useful to estimate cooling performance when it is linked together by the back pressure theory in duct system. and the radiated noise can also be estimated by the SEA. Therefore a designer can use these approaches to define the opening ratio of an enclosure and the mass flow rate of air considering radiating noise.

• 한국산업보건학회지
• /
• 제3권2호
• /
• pp.213-226
• /
• 1993

The purpose of this study is to computerize the design of single source for a duct work system which is essential for the improvement of working places. There are different types of hood, such as general hood, push pull hood and canopy hood. And out of these three types, general hood and canopy hood were used as subjects of this study. The software used here was Quattro Pro 123 programm, and the hardware was IBM PS/SX(type 5510-SK4 S/N 83-05164). And the results are tabulated in