• Journal of Korean Neurosurgical Society
• /
• 제29권1호
• /
• pp.87-94
• /
• 2000

Objective : Various surgical approaches have been implemented to fulfill the ideal goals of treatment for cervical spondylotic lesions. Conventional approaches are represented by anterior approach with or without fusion and posterior approach. The authors has applied newly developed anterior cervical microforaminotomy for these lesions on minimally invasive basis. Materials and Method : Twenty-one patients, with cervical HIVD, or stenosis, or both, underwent anterior cervical microforaminotomy between March, 1998 and April, 1999. Fifteen patients underwent unilateral decompression, and 6 bilateral decompression via unilateral foraminotomy. Operation of one level was performed in 16 patients, 2 levels in 4 patients, and 3 in 1 patient. The foraminotomy was accomplished by resecting the uncovertebral joint. Through this hole, compressed nerve root was decompressed by removing the spondylotic spur or disc fragment, and diagonal removing of posterior osteophyte from foraminotomy site to begining of contralateral nerve root made spinal cord decompression. Results : The outcome was excellent in 17 patients(81%) and good in 4 patients(19%) based on Odom's criteria. No complication was encounterd, and average post-operation hospital stay was 3.7 days. Conclusions : These results indicate that anterior cervical microforaminotomy provide adequate neural decompression, minimum postoperative discomfort and fast recovery.

• Journal of Korean Neurosurgical Society
• /
• 제29권6호
• /
• pp.738-743
• /
• 2000

Objectives : The less invasive stereotactic surgery of hypertensive intracerebral hematoma has been preferred. Many techniques were developed to facilitate aspiration of a dense blood clot in acute stage. Authors describe a method for evacuation of putaminal hematoma via computerized tomography(CT)-aided free-hand stereotactic infusion of urokinase and frequent negative pressure aspiration. Patients and Methods : A total of ten patients with spontaneous putaminal hematoma underwent surgery with negative pressure aspiration in the three-year period. All procedures were performed within 12 hours of insult. A silicone ventricular catheter was inserted into the center of hematoma through a burr hole at the Kocher's point under local anesthesia. In a typical case of putaminal hematoma, the trajectory of catheter was pointed the center of hematoma parallel to sagittal plane vertically and the external auditory meatus posteriorly. Immediately after the first trial of hematoma aspiration low-dose urokinase solution(2,000IU/5ml saline) was administrated through the catheter and drain was clipped for 30 minutes. Subsequently, the partially liquified hematoma was manually aspirated using a 10ml syringe with a negative pressure of less than 2 to 3ml. The procedure was carefully repeated every 1 hour until the hematoma was near totally evacuated. Results : The patients population consisted composed of 4 men and 6 women with a mean age of 61.6 years. All had major neurological deficits preoperatively. The mean hematoma volume was 44.3 ml and hematoma was drained for 20 to 48 hours. No complications such as rebleeding, meningitis, or malplaced catheter were noted. Outcome was moderately disabled in four patients and good recovery in three patients. Conclusion : Although the frequent negative pressure aspiration and low-dose urokinase infusion has the disadvantage of possbility of rebleeding and infection, it is consisdered to be an effective method because it allows a simple, safe, and complete removal of hematoma.

• 한국통신학회논문지
• /
• 제40권6호
• /
• pp.1058-1069
• /
• 2015

무선 센서 네트워크에서 위치 기반 라우팅은 위치 정보를 이용하여 데이터 메시지를 전달하기에 효과적인 방법으로 알려져 있다. 위치 기반 라우팅에서 대표적인 그리디 포워딩이 불가능할 경우, 페이스 라우팅이 복구 수단으로 쓰이고 있다. 페이스 라우팅은 교차된 연결들을 제거한 평면 그래프를 바탕으로 구성되며 이는 가장 가까운 이웃 노드들의 연결을 제외한 나머지 연결들은 모두 제거됨을 의미한다. 하지만 페이스 라우팅은 무선 반경을 고려하지 않아 한 홉 범위 안에서 멀리 갈 수 있는 링크들이 존재하더라도 평면 그래프의 규칙에 의해 짧은 링크들을 선택한다. 이것은 밀집된 지역에서 페이스 라우팅을 쓰일 경우 에너지 효율성을 저하시킨다. 본 논문에서는 평면 그래프에서 제거된 링크들을 찾고 이용할 수 있는 프로토콜을 제안한다. 본 프로토콜은 작은 크기의 컨트롤 메시지와 함께 무선 반경에서 제거된 링크를 찾는다. 시뮬레이션을 통해 제안 방안이 이전 페이스 라우팅 프로토콜보다 에너지 효율성이 높음을 보인다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1439-1444
• /
• 2005

Induction motors are the most commonly used electrical drives because they are rugged, mechanically simple, adaptable to widely different operating conditions, and simple to control. The most common faults in squirrel-cage induction motors are bearing, stator and rotor faults. Surveys conducted by the IEEE and EPRI show that the most common fault in induction motor is bearing failure (${\sim}$40% of failure). Thence, this paper addresses experimental results for diagnosing faults with different rolling element bearing damage via motor current spectral analysis. Rolling element bearings generally consist of two rings, an inner and outer, between which a set of balls or rollers rotate in raceways. We set the experimental test bed to detect the rolling-element bearing misalignment of 3 type induction motors with normal condition bearing system, shaft deflection system by external force and a hole drilled through the outer race of the shaft end bearing of the four pole test motor. This paper takes the initial step of investigating the efficacy of current monitoring for bearing fault detection by incipient bearing failure. The failure modes are reviewed and the characteristics of bearing frequency associated with the physical construction of the bearings are defined. The effects on the stator current spectrum are described and related frequencies are also determined. This is an important result in the formulation of a fault detection scheme that monitors the stator currents. We utilized the FFT, Wavelet analysis and averaging signal pattern by inner product tool to analyze stator current components. The test results clearly illustrate that the stator signature can be used to identify the presence of a bearing fault.

• 한국전자파학회논문지
• /
• 제28권1호
• /
• pp.80-83
• /
• 2017

본 논문에서는 휘어짐이 가능한 유연한 기판 위에 X-대역에서 동작하는 PIN 다이오드 기반 재구성 주파수 선택 표면구조 (RFSS)를 설계하였다. 제안된 구조는 윗면에 십자형 루프 패턴과 인덕턴스 성분의 스터브 사이에 위치한 PIN 다이오드의 전기적 제어를 통해 C-대역(OFF)과 X-대역(ON)에 대한 주파수 재구성이 가능하며, 그리드 형태의 전원 바이어스 회로와 비아홀구성을 통해 기생 결합을 최소화함으로써 단위구조와의 격리도를 확보하였다. 설계한 결과를 바탕으로 유연한 필름기판위에 제안한 RFSS 를 제작하고, 측정 실험을 통해 입사파의 편파와 입사각 그리고 단일 곡률을 갖는 곡면에 대한 안정적인 투과 특성을 확인하였다.

• 한국세라믹학회지
• /
• 제47권6호
• /
• pp.498-502
• /
• 2010

Aluminium titanate($Al_2TiO_5$) has extremely anisotropic thermal expansion properties in single crystals, and polycrystalline material spontaneously microcracks in the cooling step after sintering process. These fine intergranular cracks limit the strength of the material, but provide an effective mechanism for absorbing strain energy during thermal shock and preventing catastrophic crack propagation. Furthermore, since machinable BN-ceramics used as an insulating substrate in current micro-electronic industry are very expensive, the development of new low-cost machinable substrate ceramics are consistently required. Therefore, cheap $Al_2TiO_5$-machinable ceramics was studied for the replacement of BN ceramics. $Al_2O_3-Al_2TiO_5$ ceramic composite was fabricated via in-situ reaction sintering. $Al_2O_3$ and $TiO_2$ powders were mixed with various mol-ratio and sintered at 1400 to $1600^{\circ}C$ for 1 h. Density, hardness and strength of sintered ceramics were systematically measured. Phase analysis and microstructures were observed by XRD and SEM, respectively. Machinability of each specimens was tested by micro-hole machining. The results of research showed that the $Al_2TiO_5$-composites could be used for low-cost machinable ceramics.

• Advances in Traditional Medicine
• /
• 제7권4호
• /
• pp.409-417
• /
• 2007

We investigated the effect of Arogh, a polyherbal formulation (PHF) on animal models of anxiety based on exploratory behavior. The anxiolytic activity of polyherbal formulation (30, 100, 300 and 500 mg/kg) was studied using various behavioural paradigms such as elevated plus maze (EPM), light/dark apparatus (LDA), open field apparatus (OFA), hole board apparatus (HBA). Diazepam (1 mg/kg) was used as a standard anxiolytic drug. The effect of PHF (100 and 300 mg/kg) on serotonin, dopamine and noradrenaline mediated behaviour was studied by lithium induced head twitches in rats, haloperidol induced catalepsy in mice and clonidine induced hypothermia in rats respectively. In EPM, PHF (100, 300 and 500 mg/kg) significantly (P < 0.05) increased the time spent in open arms and the number of entries in open arms. In LDA, PHF (100, 300 and 500 mg/kg) significantly (P < 0.05) increased the time spent in lit zone. In OFA, PHF (100, 300 and 500 mg/kg) significantly (P < 0.05) increased the number of assisted rearing and the number of squares traversed. In HBA, PHF (100, 300 and 500 mg/kg) significantly (P < 0.05) increased the number of head poking. In lithium induced head twitches, PHF (100 and 300 mg/kg) significantly (P < 0.05) decreased the number of head twitches. In haloperidol induced catalepsy, PHF (300 mg/kg) decreased the duration of catalepsy significantly (P < 0.05) at 60 min. In clonidine-induced hypothermia, PHF (300 mg/kg) did not modify the effect. Drugs must be carefully assessed on EPM test and therefore in the present study EPM is supported by other tests. Present study indicates that Arogh, a polyherbal formulation possess anxiolytic activity. It diminished serotonergic transmission and decreased the duration of catalepsy indicating potentiation of dopaminergic transmission. Thus, Arogh a polyherbal formulation contains bioactive principles which possess anxiolytic activity and modified 5-HT and DA mediated behaviour.

• Journal of the Optical Society of Korea
• /
• 제14권4호
• /
• pp.321-325
• /
• 2010

We analyze the current density - voltage (J - V) curve of a Cu(In,Ga)$Se_2$ (CIGS) thin-film solar cell measured at different irradiation power densities. For the solar-cell sample investigated in this study, the fill factor and power conversion efficiency decreased as the irradiation power density (IPD) increased in the range of 2 to 5 sun. Characteristic parameters of solar cell including the series resistance ($r_s$), the shunt resistance ($r_{sh}$), the photocurrent density ($J_L$), the saturation current density ($J_s$) of an ideal diode, and the coefficient ($C_s$) of the diode current due to electron-hole recombination via ionized traps at the p-n interface are determined from a theoretical fit to the experimental data of the J - V curve using a two-diode model. As IPD increased, both $r_s$ and $r_{sh}$ decreased, but $C_s$ increased.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.246-246
• /
• 2010

As the trench width in the interconnect technology decreases down to nano-scale below 50 nm, superconformal gap-filling process of Cu becomes very critical for Cu interconnect. Obtaining superconfomral gap-filling of Cu in the nano-scale trench or via hole using MOCVD is essential to control nucleation and growth of Cu. Therefore, nucleation of Cu must be suppressed near the entrance surface of the trench while Cu layer nucleates and grows at the bottom of the trench. In this study, suppression of Cu nucleation was achieved by treating the Ru barrier metal surface with capacitively coupled hydrogen plasma. Effect of hydrogen plasma pretreatment on Cu nucleation was investigated during MOCVD on atomic-layer deposited (ALD)-Ru barrier surface. It was found that the nucleation and growth of Cu was affected by hydrogen plasma treatment condition. In particular, as the plasma pretreatment time and electrode power increased, Cu nucleation was inhibited. Experimental data suggests that hydrogen atoms from the plasma was implanted onto the Ru surface, which resulted in suppression of Cu nucleation owing to prevention of adsorption of Cu precursor molecules. Due to the hydrogen plasma treatment of the trench on Ru barrier surface, the suppression of Cu nucleation near the entrance of the trenches was achieved and then led to the superconformal gap filling of the nano-scale trenches. In the case for without hydrogen plasma treatments, however, over-grown Cu covered the whole entrance of nano-scale trenches. Detailed mechanism of nucleation suppression and resulting in nano-scale superconformal gap-filling of Cu will be discussed in detail.

• Bulletin of the Korean Chemical Society
• /
• 제35권2호
• /
• pp.441-447
• /
• 2014

$AgI/AgCl/H_2WO_4$ double heterojunctions photocatalyst was prepared via deposition-precipitation followed by ion exchange method. The structure, crystallinity, morphology, chemical content and other physical-chemical properties of the samples are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive x-ray spectra (EDX), UV-vis diffuse reflectance spectroscopy (DRS), and photoluminescence (PL). The photocatalytic activity of the $AgI/AgCl/H_2WO_4$ was evaluated by degrading methyl orange (MO) under visible light irradiation (${\lambda}$ > 400 nm). The double heterojunctions photocatalyst displayed more efficient photocatalytic activity than pure AgI, AgCl, $H_2WO_4$ and AgCl/$H_2WO_4$. Based on the reactive species and energy band structure, the enhanced photocatalytic activity mechanism of $AgI/AgCl/H_2WO_4$ was discussed in detail. The improved photocatalytic performance of $AgI/AgCl/H_2WO_4$ double heterojunctions could be ascribed to the enhanced interfacial charge transfer and the inhibited recombination of electron-hole pairs, which was in close relation with the $AgI/AgCl/H_2WO_4$ heterojunctions formed between AgI, AgCl and $H_2WO_4$.