• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.314-324
• /
• 2020

Due to the nonlinearity and environmental uncertainties, the design of the ship's steering controller is a long-term challenge. The purpose of this study is to design an intelligent autopilot based on Extended Kalman Filter (EKF) trained Radial Basis Function Neural Network (RBFNN) control algorithm. The newly developed free running model scaled surface vessel was employed to execute the motion control experiments. After describing the design of the EKF trained RBFNN autopilot, the performances of the proposed control system were investigated by conducting experiments using the physical model on lake and simulations using the corresponding mathematical model. The results demonstrate that the developed control system is feasible to be used for the ship's motion control in the presences of environmental disturbances. Moreover, in comparison with the Back-Propagation (BP) neural networks and Proportional-Derivative (PD) based control methods, the EKF RBFNN based control method shows better performance regarding course keeping and trajectory tracking.

• 한국해양공학회지
• /
• 제37권1호
• /
• pp.38-48
• /
• 2023

To maintain the existing systems of ships and introduce autonomous operation technology, it is necessary to improve situational awareness through the sensor fusion of the automatic identification system (AIS) and automatic radar plotting aid (ARPA), which are installed sensors. This study proposes an algorithm for determining whether AIS and ARPA signals are sent to the same ship in real time. To minimize the number of errors caused by the time series and abnormal phenomena of heterogeneous signals, a tracking method based on the combination of the unscented Kalman filter and probabilistic data association filter is performed on ARPA radar signals, and a position prediction method is applied to AIS signals. Especially, the proposed algorithm determines whether the signal is for the same vessel by comparing motion-related components among data of heterogeneous signals to which the corresponding method is applied. Finally, a measurement test is conducted on a training ship. In this process, the proposed algorithm is validated using the AIS and ARPA signal data received by the voyage data recorder for the same ship. In addition, the proposed algorithm is verified by comparing the test results with those obtained from raw data. Therefore, it is recommended to use a sensor fusion algorithm that considers the characteristics of sensors to improve the situational awareness accuracy of existing ship systems.

• 한국통신학회논문지
• /
• 제38C권4호
• /
• pp.371-377
• /
• 2013

5톤 이상의 어선에는 VHF(Very High Frequency) 대역의 DSC(Digital Selective Calling)가 어선법과 선박안전법에 의무화되어 있다. 어선의 무선설비 관련 규정에는 안전운항을 확보하고 해양사고 발생시 신속하게 대응하기 위하여 선박의 소유자는 국토해양부장관의 고시에 따라 어선위치 자동발신 장치를 갖추도록 규정하고 있다. 따라서 어업정보통신국은 2012년 동해를 시작으로 남해와 서해에 연차적으로 VHF 해안국을 설치하고, 웹기반으로 리모트 콘트롤 및 모니터링에 의하여 DSC를 원격으로 운용하는 연안 VMS(Vessel Monitoring System) 구축사업이 추진중에 있다. 모든 어선의 VHF DSC는 GPS와 연동되며 DSC의 호출에 의하여 자동으로 위치정보를 중계소에 전송하게 된다. 본 논문에서는 동해권의 VHF DSC 해안국을 대상으로 통신해역 설정과 운용 그리고 등록선박의 항해에 따른 권역별 로밍서비스를 실현하는 항적추적과 RSSI (Received Signal Strength Indication) 기법을 병행하는 알고리즘을 연구하였다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.320-323
• /
• 2002

This paper presents a new generation of system for pressure vessel and shipbuilding. Typical pressure vessel and ship building weld joint preparations are either traditional V, butt, fillet grooves or have narrow or semi narrow gap profiles. The fillet and U groove are prevalently used in heavy industries and shipbuilding to melt and join the parts. Since the wall thickness can be up to 6" or greater, welds must be made in many layers, each layer containing several passes. However, the welding time for the conventional processes such as SAW(Submerged Arc Welding) and FCAW(Flux Cored Arc Welding) can be many hours. Although SAW and FCAW are normally a mechanized process, pressure vessel and ship structures welding up to now have usually been controlled by a full time operator. The operator has typically been responsible for positioning each individual weld run, for setting weld process parameters, for maintaining flux and wire levels, for removing slag and so on. The aim of the system is to develop a high speed welding system with multitorch for increasing the production speed on the line and to remove the need for the operator so that the system can run automatically for the complete multi-torch multi-layer weld. To achieve this, a laser vision sensor, a rotating torch and an image processing algorithm have been made. Also, the multitorch welding system can be applicable for the fine grained steel because of the high welding speed and lower heat input compare to a conventional welding process.

• 한국항해항만학회지
• /
• 제37권5호
• /
• pp.447-452
• /
• 2013

해상교통관제시스템(VTS)은 선박의 위치, 속도, 침로 등 해상 교통 정보를 획득하기 위하여 다수의 해상감시레이더를 주요 센서로 이용하고 있으며, 거리 및 방위각 바이어스와 같은 2차원 해상감시레이더의 시스템 오차는 레이더 영상 및 표적 추적정보의 정확도를 크게 저하시킬 수 있다. 따라서 해상교통관제시스템에서 정확한 표적정보를 제공하기 위하여 레이더의 시스템 오차는 정밀하게 보정되어야 한다. 본 논문에서는 VTS 관제영역에 설치된 항로표지의 위치정보를 이용하여 2차원 해상감시레이더의 거리 및 방위각 오차를 보정하기 위한 방법을 제안한다. 2차원 레이더 측정값의 표준오차 모델과 항로표지 위치정보로부터 측정 잔차 모델을 유도하고, 레이더 시스템 오차를 추정하기 위한 선형 칼만필터를 설계한다. Monte-Carlo 모의실험을 통하여 제안한 방법을 검증하고, 항로표지 정보의 개수에 따른 레이더 시스템 오차 추정의 수렴 특성 및 정확도를 분석한다.

• 수산경영론집
• /
• 제41권3호
• /
• pp.103-127
• /
• 2010

The FAO reports that IUU fishing activities have widespread economic, social, and management consequences, including depriving legitimate fishers of harvest opportunities. It affects all fisheries from small scale to industrial. It also affects the ability of governments to support sustainable livelihoods for fishers and, more broadly, to achieve food security. The complexity of IUU requires various measures to combat IUU fishing such as adoption of IUU vessel lists; stronger port State controls; improved monitoring, control and surveillance (MCS); implementation of market-related measures to help ensure compliance; and capacity-building assistance. Trade and market measures reduce opportunities for IUU fishing activities by precluding or impeding access to markets for IUU product in a manner consistent with international law. ICCAT, CCAMLR, and IATTC, have put in place trade tracking programs or catch documentation schemes, and WCPFC is considering such a program. Vessel lists assist enforcement authorities in determining which vessels are or are not authorized to be fishing or conducting fishing support activities in specified areas. A number of RFMOs maintain records of IUU vessels: CCAMLR, IATTC, ICCAT, NAFO, NASCO, NPAFC, WCPFC. Section 608 of the US MSRA calling on the Secretary of Commerce, in consultation with the Secretary of State, and in cooperation with relevant regional fishery management councils and any relevant advisory committees, to take actions to improve the effectiveness of international fishery management organizations in conserving and managing stocks under their jurisdiction. EU IUU Regulation entered into force on 1 January 2010, was intended to regulate the highly complex multi-channel fisheries supply system of the European Community (EC) in an effort to improve global fisheries sustainability.

• 제어로봇시스템학회논문지
• /
• 제11권4호
• /
• pp.363-368
• /
• 2005

This paper proposes an LOS(line-of-sight) guidance system of a ship for path following. From the viewpoint of a control configuration, guidance is a special type of compensation algorithm that is placed in front of the controller to accomplish navigational objects. A guidance system generates a reference trajectory for trajectory tracking or path control and decides the desired velocity, position and heading angle. A control system executes commands based on a reliable guidance law during navigation. An LOS vector from the vessel to a point on the path between two way-points in straight-line navigation or a point among turning circle in turning navigation is selected, and then a heading angle is calculated to converge the desired path based on the LOS vector. The LOS guidance law is defined for the straight-line and the turning circle, respectively. The effectiveness of the suggested LOS guidance system is assured through computer simulation.

• 산업경영시스템학회지
• /
• 제34권4호
• /
• pp.11-16
• /
• 2011

Information of freight tracking and tracing is one of core elements in logistics point of view. We can monitor the vehicle or vessel where freights are loaded and get the in-transit data via GPS. However, security problem exists after the shipments are unloaded. RFID is well utilized for securing the container which products are stuffed into. International standard organization sets relevant specification and e-seal appears to be at issue. The paper investigates current status of corresponding technology and proposes the policy for development of logistics industry.

• 한국정보전자통신기술학회논문지
• /
• 제2권3호
• /
• pp.71-78
• /
• 2009

본 논문에서는 측정된 PPG 신호로부터 심박동수를 추정 하는 방법을 제시한다. PPG 신호는 현관에 흐르는 혈류량을 측정한 것으로 심장의 수축과 이완에 영향을 받아 단일 주파수적인 특성을 가지며 이러한 특성을 이용하여 PPG 주파수를 2차 IIR 적응 놋치 필터로 추적한다. 적응 알고리즘을 통하여 지속적으로 필터 계수를 갱신하여 얻어진 PPG 주파수를 바탕으로 사람의 심박동수를추정한다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2000년도 제13회 춘계학술대회 및 임시총회 학술발표 논문집
• /
• pp.902-906
• /
• 2000

망막 혈관 구조의 분석은 망막에 관련된 환자의 진단 및 치료에 중요한 정보를 제공하기 때문에 다양한 연구가 진행되어 왔다. 본 연구에서는 ICG(IndoCyanine Green) 기술을 이용한 망막 영상의 혈관 구조를 분석하기 위해 원의 방정식으로 묘사된 혈관 영역 에너지 함수와 분기점 추정 템플릿을 사용하여 혈관의 특징점들을 추정한 후 혈관의 형체(body)를 자동으로 추적하는 동시에 분기점을 추출하는 방법을 제안한다. 전체 혈관의 자동추적과 분기점 추출을 가능하게 하는 특징점 추정 방법과 혈관 형체의 자동추적 알고리즘 및 분기점 추출 방법을 ICG 망막 영상에 적용하여 실험한 결과 만족할 만한 성능을 보였다.