• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.6
• /
• pp.642-648
• /
• 2019

Vessels sail according to the COLREG to prevent a collision. However, it is difficult to apply COLREG under special situation as heavy traffic, at this time personal skills of the operator are required. In this case, traffic control is required through the maritime traffic monitoring system. Therefore, maritime traffic management is globally implemented by VTS. In this system, VTS of icer uses the VTS system to assess risks and recommends possible safety operation to vessels with radio systems. This study considers that the risk analysis method with AI (Artificial Intelligence) technology from the operator's aspect. In addition, the research explains the Maritime Traffic Safety Monitoring System, Including AR (Augmented Reality) technology to increase vessel control efficiency. This system is able to predict hazards and risk priorities, and it leads to sequential elimination of dangerous situations. Especially, the hazard situations can be analyzed from operator's perspective of each vessel instead of the VTS officer's aspect, which is more practical than the conventional method. Furthermore, the result of analysis enables to comprehend quantitative hazardous areas and support recommended routes to avoid a collision. As a result, I firmly believe that the system will support to prevent a collision in complex traffic waters. In particular, it could be adopted as a collision prevention system for Maritime Autonomous Surface Ship, which occupies a significant proportion in Maritime 4th industrial revolution.

• Nuclear Engineering and Technology
• /
• v.48 no.1
• /
• pp.98-113
• /
• 2016

A reactor vessel level monitoring system measures the water level in a reactor during normal operation and abnormal conditions. A drop in the water level can expose nuclear fuel, which may lead to fuel meltdown and radiation spread in accident conditions. A level monitoring system mainly consists of a sensing line and pressure transmitter. Over a period of time boron sediments or other impurities can clog the line which may degrade the accuracy of the monitoring system. The aim of this study is to determine blockage in a sensing line using the energy of the composite signal. An equivalent Pi circuit model is used to simulate blockages in the sensing line and the system's response is examined under different blockage levels. Composite signals obtained from the model and plant's unblocked and blocked channels are decomposed into six levels of details and approximations using a wavelet filter bank. The percentage of energy is calculated at each level for approximations. It is observed that the percentage of energy reduces as the blockage level in the sensing line increases. The results of the model and operational data are well correlated. Thus, in our opinion variation in the energy levels of approximations can be used as an index to determine the presence and degree of blockage in a sensing line.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.spc
• /
• pp.11-17
• /
• 2022

In this study, we address the development of a floating platform system based on a unmanned surface vessel for wide-area sensing and monitoring of hazardous and noxious substances (HNSs). For long endurance, a movable floating platform with no mooring lines was used and modified for HNS sensing and monitoring. The floating platform was equipped with various sensors such as optical and thermal imaging cameras, marine radar, and sensors for detecting HNSs in water and air. Additionally, for experiment validation in real outdoor environments, a portable gas-exposure system (PGS) was built and installed on the monitoring system. The software for carrying out the mission was integrated with the Robot Operating System (ROS) framework. The practical feasibility of the developed system was verified through experimental tests conducted in inland water and real-sea environments.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.15 no.2
• /
• pp.71-78
• /
• 2020

This paper proposes vision sensors and deep learning-based around view monitoring system for ship berthing. Ship berthing to the port requires precise relative position and relative speed information between the mooring facility and the ship. For ships of Handysize or higher, the vesselships must be docked with the help of pilots and tugboats. In the case of ships handling dangerous cargo, tug boats push the ship and dock it in the port, using the distance and velocity information receiving from the berthing aid system (BAS). However, the existing BAS is very expensive and there is a limit on the size of the vessel that can be measured. Also, there is a limitation that it is difficult to measure distance and speed when there are obstacles near the port. This paper proposes a relative distance and speed estimation system that can be used as a ship berthing assist system. The proposed system is verified by comparing the performance with the existing laser-based distance and speed measurement system through the field tests at the actual port.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.08a
• /
• pp.208-216
• /
• 2004

Since 2000, the authors have been developing remote radar network system to observe the vessel traffic in Tokyo Bay. In December 2002, the first operational remote radar station was set at the National Defense Academy in Yokosuka, and vessel traffic observation was started. However, it was impossible to perform accurate observation in the northern part of Tokyo Bay by this Yokosuka radar station only. In September 2003, the second remote radar station and AIS receiving station were installed at Higashi Ogishima in Kawasaki. This second radar enabled us to carry out accurate observation in that area. Both radars can be remotely controlled from the monitoring station in Tokyo University of Marine Science and Technology. On September 30 and October 1,2003, the vessel traffic observation was carried out using both radars. Combining radar images observed by both radars, the ships' tracks were taken and the dangerous ships were extracted by using SJ value and Bumper Model. The time changes of dangerous ship density in some areas in Tokyo Bay and utilization ratio of the traffic routes were also investigated. In addition, analyzing the AIS date received at Kawasaki station, the positions and speed vectors of the ships equipped with AIS were shown.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.3
• /
• pp.112-118
• /
• 2011

Ship can be faced with more dangerous situations than ground vehicles due to the opened surroundings, sea. Therefore, it is very important to prevent the ship emergency by finding risk factor. In this paper, We propose context-aware monitoring system which that frequently check the condition of ship using the data that get through the installed sensor in the ship as gyro-sensor, strain-gage sensor. We analyzed sensor data through backpropagation algorithm and the Condition and Safety Information of sailing ship is transmitted to the crew's personal mobile device in the ship. Thus, moving crew can check the ship's condition in real time. As a result, we obtained about 95% accuracy for fire risk context and about 89% accuracy for body of Ship risk context in the simulated experiments.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.335-338
• /
• 2006

This report introduces a National Vessel Monitoring System(NVMS) within the General Information Center On Maritime Safety and Security(GICOMS) project and a national legislation system for ship's safety management in Korea. We also represent future directions of NVMS in terms of E-Navigation(E-Nav), which is the new study item for COMSAR and NAV that has been adopted from the Maritime Safety Committee(MSC) 81st session. It concludes the future E-Nav system, when it is built, that all functions of NVMS should be used by NVMS controllers as well as mariners, and we should also consider the existing NVMS infrastructure including S/W and H/W.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.687-692
• /
• 2008

In a nuclear power plant, loose part monitoring and its diagnostic technique is one of the major issues for ensuring the structural integrity of the reactor system. Typically, accelerometers are mounted on the surface of a reactor vessel to localize impact location caused by the impact of metallic substances on the reactor system. However, in some cases, the number of the accelerometers is not enough to estimate the impact location precisely. In such a case, one of alternative plan is to utilize another type sensors that can measure the vibration of the reactor structure even though the measuring frequency ranges are different from each others. The AE sensors installed on the reactor structure can be utilized as additional sensors for loose part monitoring. In this paper, we proposed a new method to estimate impact location by using both accelerometer signal and AE signal, simultaneously. The feasibility of the proposed method is verified by an experiment. The experimental results demonstrate that we can enhance the reliability and precision of the loose part monitoring.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.11
• /
• pp.1143-1149
• /
• 2008

In a nuclear power plant, loose part monitoring and its diagnostic technique is one of the major issues for ensuring the structural integrity of the reactor system. Typically, accelerometers are mounted on the surface of a reactor vessel to localize impact location cavsed by the impact of metallic substances on the reactor system. However, in some cases, the number of the accelerometers is not enough to estimate the impact location precisely. In such a case, one of alternative plan is to utilize another type sensors that can measure the vibration of the reactor structure even though the measuring frequency ranges are different from each others. The AE sensors installed on the reactor structure can be utilized as additional sensors for loose part monitoring. In this paper, we proposed a new method to estimate impact location by using both accelerometer signal and AE signal, simultaneously. The feasibility of the proposed method is verified by an experiment. The experimental results demonstrate that we can enhance the reliability and precision of the loose part monitoring.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.274-276
• /
• 2017

Korean e-Navigation is a system that introduced to reduce maritime accidents. In order to reduce marine accidents, Korean e-Navigation provides the following services-"Vulnerable Vessel Monitoring", "Vulnerable Vessel support & monitoring", "Optimal safety route", "ENC Streaming for Small Vessel", "Tug & Barge Support", "Maritime Safety Information Providing". Each Service is a system separated into finctional units and integrated into Korean e-Navigation. Korean e-Navigation is introducing data middleware to integrate each service and the DDS(Data Distribution Service) is judged to be effective. Thus, this paper analyzed the characteristics of DDS middleware types suitable for each service of e-Navigation.