• Title/Summary/Keyword: Vessel Operation Cost

Search Result 66, Processing Time 0.022 seconds

A Study on the Route Operation & Safety Improvement in Gwangyang Traffic Safety Designated Area Based on ES Model (ES모델을 통한 광양항 교통안전특정해역의 항로운영과 안전성 향상에 관한 연구)

  • Kim, Deug-Bong;Park, Young-Soo
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.22 no.2
    • /
    • pp.153-159
    • /
    • 2016
  • Gwangyang traffic safety designated area is composed of 3 fairways (Deep water fairway, inbound fairway, and outbound fairway). However, inbound vessels can't use this passage because of Samyeo rock and artificial fishing banks in inbound route. The problem with the rocks and artificial fishing banks has been raised by ship navigators and authorities of the port. This research is about the safety evaluation and management plan of the passage, and we conducted maritime traffic simulation using a model based on a ship operator risks. As a result, assuming that future marine traffic volume is the same as the present, and if the ship operators use 3 fairways and not two, it showed risk reduction of 46.4 % (vessels over 50,000 DWT using DW route) and 57.1 % (vessels over 10,000 DWT using DW route). Also, in a traffic volume condition which is the same as the present, to induce vessels over 50,000 DWT to use DW route is effective in mitigating of risks. Meanwhile, in a condition which increased the traffic volume by 150 %, it is more effective to induce vessels to use DW route. This research is the result of analysis using the model based on ship operator risks, and not cost-effectiveness analysis on the removal of Samyeo rock and artifical fishing banks. This research is expected to be used on setting up the sea route and management plan (particularly, restriction on passing DW route).

A Study on the Integrated Utilization of Nationally-Supported Research Vessels Using Cost-Benefit Analysis (비용-편익 분석을 통한 국가 해양 연구·조사선의 최적 통합활용 방안 연구)

  • Park, Cheong Kee;Park, Se Hun;Park, Seong Wook;Lee, Gun Chang
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.23 no.6
    • /
    • pp.719-730
    • /
    • 2017
  • Recently, oceanic research has been carried out investigating global scientific interests and the territorial management of national marine jurisdictional waters, including exclusive economic zones (EEZ) and the open seas. To meet the needs of ocean researchers pursuing these - objectives, acquiring advanced research infrastructure, including research vessels, large facilities, and equipment, is a top priority in ocean science. However, ocean science is a similar to space science, and securing resources and state-of-the-art technology can be expensive. Faced with these challenges, our study focused on establishing a strategy for the efficient operation and management of research vessels, attempting to establish benchmarks from foreign examples that can be adapted to suit the target context. The results of this study provide ways to identify operating systems that could increase the efficiency of joint-use research vessels. The different systems examined in this study included a joint-use committee-based management system (JCMS, Type 1), private enterprise entrusted operating system (PEOS, Type 2), institutional investment operating system (IIOS, Type 3), and commissioned executive operating system (CEOS, Type 4). The efficiencies of JCMS, PEOS, IIOS and CEOS were 9.17, 5.82, 11.2 and -1.72 %, respectively. Given the total costs involved, the most affordable operating system was IIOS. JCMS was the most cost-effective system based on a quantitative cost-benefit analysis, but IIOS also had an acceptable cost-benefit balance. An operational committee would be required and regulations and guidelines shoulde be established to employ, JCMS, while a strategy to yield independent revenue would be needed to utilize an IIOS system.

A study on development strategy of Automated Container Terminal (자동화 컨테이너터미널 개발 전략에 관한 연구)

  • 최형림;박남규;박병주;유동호;권해경
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2004.04a
    • /
    • pp.479-485
    • /
    • 2004
  • The interest of ACT (Automated Container Terminal) is increasing because of expansion of container's transportation quantity, appearance of large-sized and. high-speed vessel, high labor cost of container terminal and the change of technical level. Therefore, the ACT had been developed in several ports in the world, such as ECT (Europe Combined Terminals) and CTA (Container Terminal Altenwerder). They have studied detailed technique for the operation of ACT. In Korea, it also has increased not only expansion and improvement of container terminal, but also necessity of ACT. Now, many projects related to the development of ACT are working in Korea. And the technical improvement of operating system, automated equipments and information system has accomplished by the projects. The ACT consists of the basic equipment and the integrated information system for operating and controlling automated equipments. The productivity of ACT is maximized through efficient connection between them. Thus, the automated degree of container terminal is dependent on the developing time of operating system, reliability, transportation quantity of container, investment amount and technical level. In this paper, we propose important strategy in developing ACT through analyzing the property of each ACT.

  • PDF

Development of an Underwater Rope-cutter Device and Controller for Removal of Propeller and Shaft Foreign Material for Small Vessel (소형선박용 프로펠러 및 샤프트 이물질 제거를 위한 수중절단기 기구 설계 및 제어기 개발)

  • Lee, Hunseok;Oh, Jin-Seok;Choi, Sun-Hong
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.25 no.7
    • /
    • pp.927-935
    • /
    • 2019
  • Screw-failure accidents in small ships frequently occur in coastal waters. In particular, vessels' propulsion systems are frequently coiled due to objects such as fish-nets and ropes that float on the sea. The failure of the ship's propulsion system can cause primary accidents such as ship operation delays and drifting due to loss of power; furthermore, the possibility of secondary accidents such as those involving operators in the underwater removal of rope stuck in a propeller. Ships that do not have the proper tools to solve these problems must be either lifted onto land to be repaired or divers must dive directly under the ship to solve the problem. Accordingly, some small vessels have been equipped with rope-cutter devices on the propeller shaft to prevent ship propeller system accidents in recent years; however, they are not being applied efficiently due to the cost and time of installation. To solve these problems, this study develops an underwater rope-cutter device and controller for the removal of propeller and shaft foreign material in small vessels. This device has simple structures that use the principle of a saw. Meteor gears and crank pins were used for the straight-line rotation of saw blades of the underwater rope-cutters to allow for long strokes. Furthermore, the underwater rope-cutting machines can be operated by being connected to the ship battery. The user, a non-professional, can ensure convenience and stability by applying reverse current prevention and a speed control circuit so that it can be used more conveniently and safely.

Analysis of productivity and efficiency for mega container ships: Case of Busan Port (초대형 컨테이너 선박의 생산성 및 효율성 분석 -부산항을 중심으로-)

  • Jong-Hoon Kim;Won-Hyeong Ryu;Shin-Woo Park;Hyung-Sik Nam
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2023.05a
    • /
    • pp.121-122
    • /
    • 2023
  • As containerized maritime transport began in earnest, the size of container ships has steadily increased, and recently, the operation of 24,000 TEU-class vessels has become regular. However, concerns about the efficiency and productivity of such mega container ships from a port operational perspective have continued to be raised. The 10th Busan International Port Conference requested an in-depth study on the trends of container ship enlargement by analyzing the order status of ultra-large container ships from major global liners. Generally, the factor that drives the upsizing of ships is the realization of economies of scale that lowers transportation costs per TEU, which leads to a higher level of cost reduction per unit transportation compared to the increase in fuel consumption due to transporting large amounts of cargo with a single ship. However, it is necessary to examine whether this trend of container vessel enlargement is feasible for port operations. To this end, this study compares and analyzes the productivity and efficeiency of different ship sizes to evaluate the effect of ship size on port operations.

  • PDF

Analysis of productivity and efficiency for mega container ships: Case of Busan Port (부산항 터미널별 선박 규모에 따른 선석 생산성 및 항만 효율성 비교분석)

  • Jong-Hoon Kim;Won-Hyeong Ryu;Shin-Woo Park;Hyung-Sik Nam
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2023.11a
    • /
    • pp.72-73
    • /
    • 2023
  • As containerized maritime transport began in earnest, the size of container ships has steadily increased, and recently, the operation of 24,000 TEU-class vessels has become regular. However, concerns about the efficiency and productivity of such mega container ships from a port operational perspective have continued to be raised. The 10th Busan International Port Conference requested an in-depth study on the trends of container ship enlargement by analyzing the order status of ultra-large container ships from major global liners. Generally, the factor that drives the upsizing of ships is the realization of economies of scale that lowers transportation costs per TEU, which leads to a higher level of cost reduction per unit transportation compared to the increase in fuel consumption due to transporting large amounts of cargo with a single ship. However, it is necessary to examine whether this trend of container vessel enlargement is feasible for port operations. To this end, this study compares and analyzes the productivity and efficeiency of different ship sizes to evaluate the effect of ship size on port operations.

  • PDF