• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 추계학술대회 논문집
• /
• pp.87-92
• /
• 2003

Generally, in jack up rig design for harsh environment, its leg height is a major factor for achieving a sufficient serviceability & operability in terms of the worst environment and the workable depth. Due to difficulties in constructing such a high-slender leg, inaccessibility of yard fabrication equipment, etc. the construction of Jack up rig fur harsh deep sea has not been common. Method using heavy crawler crane, fabrication tower or extension by the floating crane vessel is still conventional construction but, considering high cost fur mobilizing heavy lift vessel (HLV) or additional marine work for implementing preload / full height test at sea, the ground-base construction is much advantageous. Air skidding method (ASM hereafter) is ground-based construction methodology, newly developed due to such requests. ASM could also be extended to similar engineering fields. This paper presents the operating sequence, design parameters and procedure which were verified through successful operation at the end of May 2002.

• 한국해양공학회지
• /
• 제29권2호
• /
• pp.135-142
• /
• 2015

The float over method is the most preferred method for installing heavy topside onto a jacket platform. A very complex platform with multiple jacket structures on a specific field requires multiple installation procedures. This study validated the installation of two topsides using a single installation barge to reduce the operation and installation cost. The hydrodynamic properties of the installation barge during the installation of two topsides were calculated. The tension and fender forces during docking were investigated to show the validity of the proposed dual topside installation method. In conclusion, the operational safety of the proposed procedure was validated through the calculation of the motion of the installation vessel and loads on the jacket legs.

• 해양환경안전학회지
• /
• 제27권7호
• /
• pp.1031-1037
• /
• 2021

국내 선박의 해양사고 발생률은 지속적으로 증가하고 있으며, 총톤수(Gross tonnage) 10톤 미만의 소형선박에서 집중적으로 발생하고 있다. 선박의 전복사고는 인명 및 재산 피해를 동반하기 때문에 반드시 예방되어야 하는 사고임에도 불구하고, 전복사고와 관련이 깊은 운항중인 소형선박의 내항성능 연구는 미진한 상태이며 내항성능과 관련된 국내·외 규정이 존재하지 않는 실정이다. 이에 본 연구에서는 전복사고가 발생한 소형선박의 재결서를 조사하여 전복사고의 주요 원인이 적재상태 불량이라는 점을 파악하고, 대표 선박을 선정하여 유체정역학적 계산 및 내항성능 해석을 수행하였다. 일반적으로 선박은 운항중 6자유도 운동을 하게 되는데 본 연구에서는 전복사고와 관련이 깊은 횡동요(Roll)를 알아보기 위해 대표 선박의 응답진폭연산자(RAO) 및 운동응답 스펙트럼(Response Spectrum)을 계산하고 3시간동안의 파도 정상상태(Stationary)에 대한 단기(Short Term) 통계 해석을 수행하였다. 그 결과 적재상태가 불량할 때에는 선박의 횡동요가 크게 발생하여 선박의 안정성을 크게 감소시킨다는 사실을 알 수 있었다.

• Ocean and Polar Research
• /
• 제37권2호
• /
• pp.119-125
• /
• 2015

This paper focuses on the efficient arrangement plan of buoyancy modules, which plan is used to secure the safe operation and structural stability of a marine riser. The marine riser is connected between a vessel and seabed devices. The movement of the vessel and the seabed devices are affected by the motion of the riser. The riser of a deep-seabed integrated mining system exerts a strong influence on the healthy transfer of minerals. So, buoyancy modules must be equipped to compensate for the problem which is the structure stability and the dynamic motion. Installation locations and quantities of the buoyancy modules are determined by real sea experiments. But this is not easy to do because in real sea experimental conditions the cost is expensive as well as being, time-consuming and dangerous. Therefore, the locations and quantities should be determined by numerical simulation. This method is called simulation-based design. The dynamic analysis models of the riser and the buoyancy modules are built into the commercial software of DAFUL.

• 수산해양기술연구
• /
• 제56권3호
• /
• pp.258-264
• /
• 2020

This study aimed to analyze the economic feasibility of the reduction of working safety accidents in stow net fishery through the prevention education to fishing crews. The benefit was evaluated by estimating insurance payment amount that was reduced through prevention education. The decreasing rate of working safety accidents was presumed to follow the experience in Japan. The cost was assumed as the cost of textbook development. Results indicated that IRR was estimated to be 79.9% in case of scenario assuming no additional operating costs while IRR was 56.3% in case of scenario assuming 10% additional operating costs. In addition, the economic feasibility would be secured when annual operating costs increased to 274 million won according to the result of sensitivity analysis.

• Ocean and Polar Research
• /
• 제21권2호
• /
• pp.117-126
• /
• 1999

To meet increasing needs for environmentally sustainable management of coastal area, there has been compelling pressure to establish a cost-effective and long-term coastal water quality (CWQ) monitoring system. A remote CWQ monitoring system, STAMP, has been developed and is in operation along the route between Kyema harbor and Anma Island in the southwestern coastal area of Korea. STAMP uses a PCS phone as a telemetry unit to transmit acquired data for monitoring general water quality parameters, and a routinely operating coastal passenger ship or car ferry. STAMP has various merits of low-cost operations; long-term monitoring with secure instrumentation; and stable real-time telemetry of acquired data with-out the loss and noise. It is expected that the system will serve as a very useful tool in the CWQ managing programs of Korea taking the advantage of many coastal passenger ships in various routes including the ships departing from the coastal industrial cities. The acquired data compiled on suspended surface sediment concentrations (SSSC) will be also valuably helpful in understanding the sediment budget across the routes of the vessel.

• 수산해양교육연구
• /
• 제26권1호
• /
• pp.49-58
• /
• 2014

Variability factors of transship cargo in the container transportation market analysis short term factors. In the past, studies on the factor of variability in container cargo volume have focused on long term volume forecast and increase in investment and competitiveness from strategic perspectives. Unlike previous studies, this paper analyzes factors of variability in transshipment volume rapidly varying in short term and seeks measures. Since it was identified that transshipment volume depends on vessel operation cost and port volume in long term but effectively on special strategies launched by port authorities in short term, the port authority experienced rapid drop in volume should continue to observe strategies of competition ports and to make use of strategies seeking appropriate countermeasures.

• 한국소음진동공학회논문집
• /
• 제27권1호
• /
• pp.14-19
• /
• 2017

Fuel oil consumption cost varies depending on every ship operation and this roughly amounts to 70 % of shipping companies' total revenue. As such, efforts towards improved fuel economy are being pursued. An annual 1 % reduction in fuel consumption is perceived to result in saving tens million US dollars on the global fleet operation. One approach is the application of power take-off configurations which are seen to increase fuel oil economy and are suitable for power generation. In this study, the dynamic properties of a shaft generator coupled on a 10S90ME main engine of an 18 600 TEU container vessel is presented. The vibratory torque and angular velocity variation was examined through theoretical analysis and actual vibration measurement. The result of the study suggests a review on existing classification rules for generator design and the lowering of vibratory torque and angular velocity variation guideline.

• 수산해양교육연구
• /
• 제27권1호
• /
• pp.308-318
• /
• 2015

In order to improve the competitiveness of Korean large purse seine fishery, the purpose of this study is to find out the problems and present the improvement of the production structure of Korean large purse seine fishery by comparing to the production structure of Norwegian purse seine fishery. Norwegian purse seine fishery has been operating labor and energy-saving systems through a single wire operation and avoiding fishing competition through the introduction of IVQ system with different types of fishing vessel and obtaining benefits from Leading fishery management integrated with fish pumps and cooling water systems. In contrast, our country has a large purse seine fishery issues such as high cost and low efficiency of production structures, the volatility of mackerel resources, the lack of leading fishery management after catching fishes, the reduction of fishing ground in accordance with the North East Asia EEZ system. To solve these problems, initiatives to improve the structure of our large purse seine fishery are as follows: First, Implementing the promotion of the effective immature fishes management and establishing Korea-China-Japan resource management system. Second, the promotion of reduction of fleet size, the review of possible single fishing operation, leading out to strengthen its competitiveness by switching to energy-efficient production systems through enhanced efforts at fisheries catches steps. Third, it is necessary to realize corporate through the diversification of business areas and the large-scale commercialization of production structure.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 추계학술대회
• /
• pp.127-132
• /
• 2004

최근 초대형 선박이 운항을 개시하면서 6,000TEU급을 최대 수용선박으로 하여 건설된 기존 항만의 인프라 및 하역시스템 전반에 큰 변화가 올 수 밖에 없다. 그러나, 대부분 국내 컨테이너 터미널은 컨테이너 처리량에 비해 장치장 규모가 협소한 편이다. 이에 안벽장비를 추가 투입함으로써 안벽의 생산성 및 선석점유율, 선박의 대기율을 크게 향상 시킬 수 있고, 동시에 장치장 규모를 늘림으로써 비용을 낮출 수 있다. 본 연구에서는 장비를 추가 투입함으로써 향상되는 하역능력과 터미널 규모의 변화에 대해 장비비, 인건비, 건설비, 운영비 측면에서의 경제성을 기존 건설 방식과 비교${\cdot}$분석을 통해 보다 합리적인 터미널 건설 방향을 제시한다.