• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.336-336
• /
• 2011

Over the past decades, organic semiconductors have been investigated intensely for their potential in a wide range of optoelectronic device applications since the organic materials have advantages for very light, flexible and low cost device fabrications. In this study, we fabricated small-molecule organic solar cells (OSCs) based on chloro[subphthalocyaninato]boron(III) (SubPc) as an electron donor and $C_{60}$ as an electron acceptor material. Recently SubPc, a cone-shaped molecule with $14{\pi}$-electrons in its aromatic system, has attracted growing attention in small-molecule OSC applications as an electron-donating material for its greater open-circuit voltage (VOC), extinction coefficient and dielectric constant compared to conventional planar metal phthalocyanines. In spite of the power conversion efficiency (PCE) enhancement of small-molecule OSC using SubPc and $C_{60}$, however, the study on the interface between donor-acceptor heterojunction of this system is limited. In this work, SubPc thin films at various thicknesses were deposited by organic molecular beam deposition (OMBD) and the evolution of surface morphology was observed using atomic force microscopy (AFM) and field emission scanning electron microscopy (FE-SEM). We also investigated the influence of film thickness and surface morphology on the PCE of small-molecule OSC devices.

• International Journal of Precision Engineering and Manufacturing
• /
• v.5 no.3
• /
• pp.35-42
• /
• 2004

This research describes that the cutting characteristics and tool wear behavior in the micro cutting of three kinds of wear resistant cemented carbides (WC-Co; V40, V50 and V60) using PCD (Poly Crystalline Diamond) and PCBN (Poly crystalline Cubic Boron Nitride) cutting tools by use of the SEM (Scanning Electron Microscope) direct observation method. The purpose of this research is to present reasonable cutting conditions from the viewpoint of high efficient cutting refer to a precise finished surface and tool wear. Summary of the results is as follows: (1) The cutting forces tend to increase as the increase of the weight percentage of WC particles, and the thrust forces was larger than the principal forces in the cutting of WC-Co. These phenomena were different from the ordinary cutting such as cutting of steel or cast iron. (2) The cutting speed hardly influenced the thrust force, because of the frictional force between the cutting tool edge and small WC particles at low cutting speed region such as 2$\mu\textrm{m}$/s. It seemed that the thrust cutting force occurred by the contact between the flank face and work material near the cutting edge. (3) The wear mechanism for PCD tools is abrasion by hard WC particles of the work materials, which leads diamond grain to be detached from the bond. (4) From the SEM direct observation in cutting the WC-Co, it seems that WC particles are broken and come into contact with the tool edge directly. This causes tool wear, resulting in severe tool damage. (5) In the orthogonal micro cutting of WC-Co, the tool wear in the flank face was formed bigger than that in the rake face on orthogonal micro cutting. And the machining surface integrity on the side of the cutting tool with a negative rake angle was better than that with a positive one, as well as burr in the case of using the cutting tool with a negative rake angle was formed very little compared to the that with a positive one.

• Journal of Korean Ophthalmic Optics Society
• /
• v.8 no.1
• /
• pp.17-22
• /
• 2003

The experimental FT-IR spectra and DTA curves of the $PbO-Bi_2O_3-B_2O_3-SiO_2$ glasses have been investigated. The composition ratio dependence of glass transition temperature showed that the structure of this glass system changes at 60 mol% $Bi_2O_3$. We have observed that the FT-IR spectra of the investigated samples with high bismuth content are dominated by bands associated to the structural units of the heaviest cation, $Bi^{3+}$ and the boron atoms in the treated samples are three and four coordinated even for very high $Bi_2O_3$ content. The low intensity of these non-bridging oxygen bands, for high PbO content glasses, can be attributed to the strong network-forming roles of PbO. The glasses absorption bands exhibited a greater change in intensities on crystallization.

• Korean Journal of Soil Science and Fertilizer
• /
• v.6 no.4
• /
• pp.205-211
• /
• 1973

General physical and chemical characteristics of eleven apple orchard soils derived from granite, granodiorite, diorite, arkose sandstone and shale were investigated in relation to soil profile. The results are summerized as follows: 1. Soils were mostly sandy and showed pH 4.35 to 6.75, 1.14 to 5.58 of organic matter, 0.065 to 0.209% of nitrogen. All properties decreased with depth. 2. Total exchangeable bases of surface soils were comparablly low (4.89 to 17.81me/100g, Ca>Mg>K>Na). Cation exchange capacity ranged from 7.74 to 21.72 mg/100g and base saturation percentage from 22.52 to 94.62%. 3. Phosphorus content of surface soil was very low (less than 35.5 mg/100g). The contents of potassium (7.2-79.2 mg/100g), available copper (1.0-16.9 ppm) and water soluble boron (0.18-0.72 ppm) were high in surface soil but low with depth. The content of manganese showed clear difference with pH, that is, at pH 4 to 6 water soluble manganese ranged from 0.42 to 17.8 ppm and exchangeable manganese from 9.82 to 66.38 ppm but above pH 6 the water soluble was less than 0.70 ppm and the exchangeable less than 22.25 ppm.

• Korean Journal of Soil Science and Fertilizer
• /
• v.4 no.1
• /
• pp.13-19
• /
• 1971

In order to establish the method of improving ill drained paddy soil where the accumulation of absorption inhibitor is worried in the earlier stages of rice growth, proper soil is selected and an field experiment is designed having treatments such as lime materials, none sulfate fertilizers, boron and straw etc. The data of yield and plant analysis in different stages of rice growth is eveluated and discussed to obtain following summaries. (1) Significant yield increase was made by the treatment of lime materials such as slacked lime or wollastonite powder, materials inhibiting the activity of microorganisms such as boron and of none sulfate fertilizers lacking inhibitor producing sources. (2) The crop scientifice causes of decreasing yield are the decreasing the number of panicles per hill, grains per panicle and the weight of grains. (3) The plant nutritional causes of decreasing yield are the lowering of nitrogen content throughout the life, phosphate content since young premodia formation stage of plant and the decreased content of magnesium, calcium and silicate in straw at harvesting stage. (4) The causes of lowering the content of various elements in rice plant grown in ill drained paddy soil are suggested as root damage by producing and accumulating absorption inhibitors such as organic acids and hydrogen sulfide etc, from the following observed facts; (a) In young premodia formation stage, attaining to the maximum production and accumulation of absorption inhibitor, the phosphate accumulation in plant was smaller in the phosphate plots than without phosphate plots and much higher in the neutralized plots by adding lime materials. (b) In the plots of straw addition, the potassium content in plant at the young premodia formation stage is very low probabley due to root damage by absorption inhibitor produced from the process of straw decomposition but higher at the stage of harvesting probably due to the immetabolic negative absorption of damaged roots. (c) The effect of boron, known as the inhibitor of microorganism activity to decompose organic matter, is apparent. (d) The effect of nonsulfate fertilizer treatment, having no source of producing inhibitor such as hydrogen sulfide, was significant. (e) All the yield components, decided around the young premodia formation stage attaining to the maximum inhibitor concentration in soil and minimum root activity, are significantly decreased.