• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.939-942
• /
• 2004

In this study, we report simulation results of single-panel LCOS (liquid crystal on silicon). Reflective LCOS microdisplays are widely used in various projection and near-eye application. For one panel system, liquid crystal response time is an important variable. The panel must switch fast enough to support the display of Field color sequential with high field rates. In order to have fast response and good contrast, a vertical alignment (VA) cell was used in this study. With suitable selection on LC parameters like temperature, viscosity, elastic constant and birefringence, it is possible to get response time of around 2ms from a 2.0 um-thick vertical alignment cell. This result also indicates an ease of production control on 2.0 um cells than 1.0 um cells.

• Journal of Information Display
• /
• 제9권4호
• /
• pp.1-5
• /
• 2008

This paper investigates the effect of the electrode edge of a patterned vertical alignment (PVA) liquid crystal (LC) device on the viewing angle characteristics. In general, a transmissive LCD applies an LC layer with half-wave retardation for a bright state and with zero retardation for a dark state. The retardation of the LC layer would be distorted in each point, however, when a voltage is applied because of the non-uniform voltage distribution in the electrode edge effect. In this paper, the feasibility of the full effect of the electrode edge on the viewing angle property is considered, and the optical viewing angles of the VA LCD with a uniform half-wave LC layer and the PVA LCD with a practical non-uniform LC layer are compared.

• Journal of Information Display
• /
• 제11권4호
• /
• pp.144-148
• /
• 2010

In this paper, vertically aligned (VA) liquid crystal (LC) modes were investigated using the alkyl chain ordering effect of self-assembled monolayers (SAMs) prepared on the anisotropic inorganic surface. On the anisotropic surface prepared through oblique ion beam irradiations, the SAM molecules are adsorbed, producing macroscopic alkyl chain ordering, which can determine the pretilt direction of the vertically aligned LC molecules through the intermolecular interactions on the surface.

• 한국전기전자재료학회논문지
• /
• 제17권6호
• /
• pp.622-632
• /
• 2004

We have studied how liquid crystal's rubbing direction and voltage driving method affect generation of disclination line. At first, generation of disclination line in vertical alignment(VA) cell and VA-twisted nematic(TN) cell has been examined. When liquid crystal's rubbing direction of bottom substrate was 0$^{\circ}$, the degree of generated disclination line was the smallest value. Further, the generation of disclination line above the electrode is less in the frame inversion than in the line inversion. Secondly, we have examined a generation of disclination line in reflective fringe-field switching cell. When the distance between common electrodes is over 3 ${\mu}{\textrm}{m}$ with on-state of one pixel and off-state of neighboring pixels, the reflectance appears only on-state pixel without generating reflectance in adjacent pixels.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.898-899
• /
• 2008

In this paper we propose a new method for obtaining two way switchable LCD. For this two domain vertical alignment LCD is used. A two way LCD is able to show different images on the same screen based on left and right perspectives. Viewing angle dependence of different grey levels of transmittance for the polar angles 0, +45 and -45 degree are also found out.

• Journal of Information Display
• /
• 제8권3호
• /
• pp.17-21
• /
• 2007

We introduce a new electrode structure for the patterned vertical alignment (PVA) mode, which has a lower color-shift at large viewing angle than the one-domain VA mode. By manipulating the period of electrode structure, we can make more multi-domains and use the existing fabrication processes without having to use additional materials.

• 한국전기전자재료학회논문지
• /
• 제16권4호
• /
• pp.322-329
• /
• 2003

We have studied how surface pretilt angle affects generation of disclination line in liquid-crystal-on silicon cells for 45$^{\circ}$-twisted nematic (TN) and vertical alignment (VA) modes with pixel size of 15$\mu\textrm{m}$. Our studies show that when the pretilt angle is increased from 0$^{\circ}$to 3$^{\circ}$ in the 45$^{\circ}$-TN cell, the disclination line at left side of on-pixel becomes weak and is well suppressed with $\theta$$\_$p/=3$^{\circ}$ although the pixel size Is decreased. In the VA cell, when the pretilt angle is decreased from 89$^{\circ}$ to 86$^{\circ}$, the disclination line at right side of the on-pixel is suppressed well and even for a smaller pixel size, it does not exist when $\theta$$\_$p/=86$^{\circ}$. The results inform that the pretilt angle strongly affects the image quality of microdisplays.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.371-371
• /
• 2007

In this study, liquid crystal (LC) aligning capabilities for vertical alignment on the $CeO_x$ thin film by thermal evaporation method were investigated. Also, the control of pretilt angles and thermal stabilities of the NLC treated on $CeO_x$ thin film were investgated. The uniform LC alignment on the $CeO_x$ thin film surfaces and good thermal stabilities with thermal evaporation can be achieved. It is considerated that the LC alignment on the $CeO_x$ thin film by thermal evaporation is attributed to elastic interaction between LC molecules and micro-grooves at the $CeO_x$ thin film surface created by evaporation. In addition, it can be achieved the good electro-optical (EO) properties of the VA-LCD on $CeO_x$ thin film layer with oblique thermal evaporation.

• 폴리머
• /
• 제35권4호
• /
• pp.337-341
• /
• 2011

수직배향 액정디스플레이의 시야각 향상을 위한 광대역 보상필름을 개발하였다. 상용화된 수직배향 액정디스플레이는 측면 시야각을 보상하는 위상차 필름을 필요로 한다. 일반적으로 triacetylcellulose(TAC)에 광학첨가제를 첨가한 후 제막연신을 통하여 수직배향 액정디스플레이용 위상차 필름을 제작하는데, 첨가되는 광학첨가제의 화학구조에 따라 필름의 위상차와 파장분산 특성이 달라진다. 본 연구에서는 첨가제에 따른 분극률 이방성을 양자역학적으로 계산하고 선택된 중심 이성질체에 사이드 그룹을 치환시켜 파장별 분극률 이방성을 또한 계산하였다. 특히, 치환기가 methoxy와 proplonate인 경우에 치환위치와 숫자에 따른 파장별 분극률 이방성을 비교하였다. 2개의 propionate 그룹이 meta위치에 있을 경우가 파장분산 특성이 가장 완만한 것을 양자역학적 계산을 통하여 예측하였으며 이를 실험을 통해 증명하였다. 파장분산 특성이 완만하다는 것은 LCD 시야각 특성이 광원의 파장에 따라 덜 변한다는 의미이며, 현재 수준보다 우수한 화질을 구현할 수 있다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.186-186
• /
• 2009

Most liquid crystal display modes, including the twisted nematic (TN) $mode^1$, the in-plane switching (IPS) $mode^2$, the fringe field switching (FFS) $mode^3$, and the vertically aligned (VA) $mode^4$ are based on either a horizontal or a vertical alignment. However, for some applications, such as no-bias-bend (NBB) pi cell or bistable bend-splay display, an intermediate pretilt angle is essential$^5$. NBB pi cells have been a focus of interest because of their fast response time; however, the reliable control of the intermediate pretilt angle of liquid crystals that is required for the fabrication of NBB pi cells is challenging. The controllable pre-tilt angle of liquid crystals was investigated using a blend of horizontal and vertical polyimide prepared by a rubbing method. Various pretilt angles in the range from 0^{\circ}$ to 90^{\circ}$ were achieved as a function of the vertical polyimide content. We observed uniform liquid crystal alignment on the rubbing-treated blended polyimide layer. A NBB pi cell with an intermediate pretilt angle of 47.8^{\circ}$ was manufactured. This cell had no initial bias voltage and a low threshold voltage, which indicates that it has low power consumption. In addition, the response time of the NBB pi cell was rapid.