• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.423-427
• /
• 2003

In this paper, LTCC stacked patch antenna with a radial CPW fed slot and grounded-shorting vertical-via wall for 19GHz band wireless LAN is presented. Suggested antenna employed a patch and grounded-shorting vertical-via wall for radiation element, consist of feeding structure which a radial open feature at the end of the CPW feed line. The optimal design parameters of the antenna using by EM simulation program. We can see that enough to bandwidth 560MHz for 19GHz band WLAN antenna specification by the optimized antenna.

• 마이크로전자및패키징학회지
• /
• 제22권4호
• /
• pp.71-76
• /
• 2015

최근 Light Emitting Diode (LED)의 효율을 높이기 위한 연구가 활발히 진행 되고 있다. 특히 소자 측면에서는 수평형 LED, 수직형 LED, via-hole 구조의 수직형 LED 등의 다양한 구조가 제시되었다. 본 논문에서는 시뮬레이션을 통해 via-hole 구조의 수직형 LED의 새로운 전극 디자인을 제시하였다. 기존 Via-hole 구조의 수직형 LED의 n-contact hole 주변에 전류가 밀집되는 문제점을 해결하면서 유효 발광면적을 극대화 시켜 소자 전체에 균일한 전류를 주입할 수 있는 소자 디자인에 대해 평가하였다. 시뮬레이션 결과를 바탕으로 최적의 전극 디자인을 실제 디바이스로 제작하여 기존의 via-hole 구조의 수직형 LED와 비교 분석하였다. 최적화된 디자인이 적용된 via hole type 수직형 LED의 경우 기존 디자인에 비해 350 mA 주입시 약 0.2 V의 Forward Voltage 감소하였지만 광 출력은 비슷하여 최종적으로 4.2%의 WPE (Wall plug efficiency)가 향상됨을 보였다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제3권1호
• /
• pp.49-56
• /
• 2002

The Z-map is a special farm of discrete non-parametric representation in which the height values at grid points on the xy-plane are stored as a 2D array z[ij]. While the z-map is the simplest farm of representing sculptured surfaces and is the most versatile scheme for modeling non-parametric objects, its practical application in industry (eg, tool-path generation) has aroused much controversy over its weaknesses, namely its inaccuracy, singularity (eg, vertical wall), and some excessive storage needs. Much research or the application of the z-map can be found in various articles, however, research on the systematic analysis of sculptured surface shape representation via the z-map model is rather rare. Presented in this paper are the following: shape modeling power of the simple z-map model, exact (within tolerance) z-map representation of sculptured surfaces which have some feature-shapes such as vertical-walls and real sharp-edges by adopting some complementary z-map models, and some application examples.

• 한국정밀공학회지
• /
• 제15권11호
• /
• pp.180-188
• /
• 1998

Z-map is a special form of discrete nonparametric representation in which the height values at grid points on the xy-plane are stored as a 2D array z[i.j]. While z-map is the simplest form of representing sculptured surfaces and it is the most versatile scheme for modeling nonparametric objects, its practical application in industry (eg, tool-path generation) aroused much controversy over its weaknesses ; accuracy, singularity (eg, vertical wall), and some excessive storage needs. Although z-map has such limitations, much research on the application of z-map can be found in various articles. However, research on the systematic analysis of sculptured surface shape representation via z-map model is rather rare. Presented in this paper are the following: shape modeling power of the simple z-map model, exact (within tolerance) B-map representation of sculptured surfaces which have some feature-shapes such as vertical-walls and real sharp-edges by adopting some complementary B-map models, and some application examples.

• 한국전산유체공학회지
• /
• 제3권2호
• /
• pp.27-38
• /
• 1998

Rotating flow of a stratified fluid contained in a circular cylinder with unstable temperature gradient imposed on the side wall of it has been numerically studied. The temperatures at the endwall disks are constant. The top disk of the container is coider than that of the bottob disk, as much as the temperature difference n${\Delta}$T, (0${\leq}$n${\leq}$3). Flows in the vessel are driven by an impulsive rotation of the hot bottom disk with respect to the central axis of the cylinder. Flow details have been acquired. For this flow, the principal balance in the interior core is characterized by a relationship between the radial temperature gradient and the vertical shear in the azimuthal velocity. As the buoyancy effect becomes appreciable, larger portions of the meridional fluid transport are long-circuit from the bottom disk to the interior region via the side wall.

• Earthquakes and Structures
• /
• 제8권6호
• /
• pp.1363-1386
• /
• 2015

The October 23 2011 Van Earthquake is studied from an earthquake engineering point of view. Strong ground motion processing was performed to investigate features of the earthquake source, forward directivity effects during the rupture process as well as local site effects. Strong motion characteristics were investigated in terms of peak ground motion and spectral acceleration values. Directiviy effects were discussed in detail via elastic response spectra and wide band spectograms to see the high frequency energy distributions. Source parameters and slip distribution results of the earthquake which had been proposed by different researchers were summarized. Influence of the source parameters on structural response were shown by comparing elastic response spectra of Muradiye synthetic records which were performed by broadband strong motion simulations of the earthquake. It has been emphasized that characteristics of the earthquake rupture dynamics and their effects on structural design might be investigated from a multidisciplinary point of view. Seismotectonic calculations (e.g., slip pattern, rupture velocity) may be extended relating different engineering parameters (e.g., interstorey drifts, spectral accelerations) across different disciplines while using code based seismic design approaches. Current state of the art building codes still far from fully reflecting earthquake source related parameters into design rules. Some of those deficiencies and recent efforts to overcome these problems were also mentioned. Next generation ground motion prediction equations (GMPEs) may be incorporated with certain site categories for site effects. Likewise in the 2011 Van Earthquake, Reverse/Oblique earthquakes indicate that GMPEs need to be feasible to a wider range of magnitudes and distances in engineering practice. Due to the reverse faulting with large slip and dip angles, vertical displacements along with directivity and fault normal effects might significantly affect the engineering structures. Main reason of excessive damage in the town of Erciş can be attributed to these factors. Such effects should be considered in advance through the establishment of vertical design spectra and effects might be incorporated in the available GMPEs.

• Journal of Korean Neurosurgical Society
• /
• 제54권1호
• /
• pp.25-29
• /
• 2013

Objective : To clarify the landmark for deciding the entry point for C1 lateral mass screws via the posterior arch by using 3-dimensional (3D) computed images. Methods : Resnick insisted that the C1 posterior arch could be divided into pure posterior and lateral lamina (C1 pedicle). Authors studied where this transition point (TP) is located between the posterior lamina and the C1 pedicle and how it can be recognized. The 3D computed images of 86 cadaver C1s (M : F=45 : 41) were used in this study. Results : The superior ridge of the C1 posterior arch had 2 types of orientation. One was in the vertical direction in the C1 posterior lamina and the other was in the horizontal direction in the C1 pedicle. The TP was located at the border between the 2 areas, the same site as the posterior end of the groove of the vertebral artery. On posterior-anterior projection, the posterior arch was sharpened abruptly at TP. We were unable to identify the TP in 6.4% of specimens due to complete or partial osseous bridges. A total of 93.8% of the TP were located between the most enlarged point of the spinal canal and the medial wall of the vertebral artery. Conclusion : The anatomic entry zone of C1 lateral laminar screws was clarified and identified based on the TP by using preoperative 3D computed images.

• 대한토목학회논문집
• /
• 제28권5B호
• /
• pp.547-558
• /
• 2008

최근 폭증하는 해상물동량으로 인해 선박은 날로 대형화되며 현재 우리나라에서는 이러한 추이에 대응하기 위해 초대형 항만건설이 서둘러 진행되고 있으며 그 중 일부는 이미 부분적으로 완성되어 운영 중이거나 계속적인 확장이 예정되어있다. 초대형 항만의 경우 항 정온도 확보를 위해 대형 직립형 방파제가 수반되기 마련이나 비교적 높은 반사율로 인해 장주기의 파랑에 취약한 구조적 문제를 지닌다. 장주기 파랑의 효과적 제어를 위해 본 고에서는 아치형 curtain wall과 유수실로 구성된 된 장파 제어체 -Eco-breaker 2- 가 제시되며 Eco-breaker 2의 수리특성을 수치적으로 규명하였다. 수치모형은 가장 강건한 파랑모형인 Navier-Stokes Eq.과 SPH(Smoothed Particle Hydrodynamics), LES(Large Eddy Simulation) 기법에 기초하여 구성하였다. 수치모형의 검증을 위한 수리모형실험도 병행하였다. 수치모의 결과 Eco-breaker 2는 유수실 내부에 생성되어 아치형 curtain wall 전면 수역과 유수실을 주기적으로 넘나드는 대규모 구조적 와로 장파를 효과적으로 제어할 수 있었다. 또한 대규모 구조적 와의 생성 영역과 세기는 내습하는 파랑의 주기에 종속하며 유수실 체류시간이 입사파 주기의 반을 하회하는 경우 반사계수는 최대 0.18까지 낮아진다. 이러한 결과는 Eco-breaker 2가 환경친화적 항의 개발에 적극적으로 활용될 수 있음을 시사하는 것으로 이를 위해 그 구체적 제원도 함께 제시하였다.