• 제목/요약/키워드: Vertical pattern

검색결과 1,032건 처리시간 0.028초

상지동작에 따른 길의 변화에 관한 연구 -입체재단법을 중심으로- (A Study on the Change of Waist Pattern by Upper Limb Motion -By the Method of Tight Fitting Technique-)

  • 이은정;박정순
    • 한국의류학회지
    • /
    • 제20권1호
    • /
    • pp.113-127
    • /
    • 1996
  • In this study, the pattern was copied by the method of Tight Fitting Techinque, which resulted from the changed body by the upper limb motion-front-vertical motion(or vertical motion in front), side-vertical motion, and horizontal motion. And, this study analyzed the change of the pattern and the observed items dimension changed to the pattern. The results are as follows: 1. In the observation of the degree of the pattern change according to the motion of upper limb, the result provides that the motion change in the range of $135^{\circ}$ to $180^{\circ}$ is the largest in front-vertical motion, $45^{circ}~90^{\circ}$ in side-vertical motion, and $0^{circ}~45^{\circ}$ in horizontal motion respectively. 2. The probability test result of the items of the motion is more related with the horizontal width item rather than the vertical length item in the front and back pattern where the back pattern has more effect than the front pattern. And the upper limb-surrounding items are more related than any otheer item. 3. The change of the pattern according to the motion shows the decrese of the neck width and the shoulder legth, the rising of the point of shoulder (or shoulder point) and armpit point, the decrease of the pattern width and the increase of the pattern length. As the angle of the motion grows vertically motion. The change of the shoulder length in the horizontal motion is smaller than that vertical. But as the angle of the motion grows horizontally, it has a tendency of decreas in th width of the front patten and the length of the pattern, whereas the width of the back pattern is noticeably increases.

  • PDF

노후 경사주거지 쇠퇴지표로서의 유휴공간 발생패턴 연구 (A Study on the Occurrence Pattern of Vacant Spaces as the Decline Index in Old Hillside Residential Area)

  • 정인아;우신구
    • 대한건축학회논문집:계획계
    • /
    • 제34권3호
    • /
    • pp.93-104
    • /
    • 2018
  • This study is about occurrence pattern of vacant spaces as a urban decline indicator to consider a decline of old hillside residential area from spatial structure perspective. For investigation based upon vacant space and the street structure, this study selects Ami Chojang-dong in Seo-gu, Busan, of which 79.7% of total area is over a gradient of $10^{\circ}$. Focused on relationship between occurrence pattern of vacant spaces and 'vertical alleys(link)' serving as main movement path of local residents in hillside residential area, the length, numbers, slopes, and use characteristic of vertical alleys were analyzed using Arc GIS 9.3 program to classify characteristic zone types of spacial structure in hillside residential area. After the occurrence pattern of vacant space are interpreted in relation with building density, vertical alleys' number length slope, the social and economic issues have been considered as well. After analyzing the occurrence pattern of vacant space, this study argues that the occurrence pattern of vacant space in old hillside residential area is rather affected by street structure system consisting of vertical alleys than the impacts of social economical issues.

가상착의 시스템을 이용한 팬츠 스타일과 기하학 무늬의 특성에 따른 시각적 효과 (A Visual Effect according to Pants Style and Geometric Pattern - Using a 3D Virtual Garment System -)

  • 박우미
    • 한국의류산업학회지
    • /
    • 제15권4호
    • /
    • pp.504-513
    • /
    • 2013
  • This study evaluates the difference of visual effect according to pant style and geometric pattern. The researcher made 28 stimuli-combination of four pant Stiles (classic, baggy, skinny, and bell-bottom) and seven geometric pattern (large vertical stripe, small vertical stripe, large horizontal stripe, small horizontal stripe, large check, small check, and hound's tooth check). The test involved 96 female college students. The stimuli were made with the i-Designer computer program. The panels tested the computer screen images of all manikins wearing pants. A 7-point scale was used to evaluate each image. For the data analysis, ANOVA and Duncan-test were applied along with an SPSS program. The results of this study are as follows. Three factors (lower-body compensation, abdomen highlight, and length compensation) influenced the visual effect pant styles and geometric patterns. The skinny style and large vertical stripe evaluated positively in elongated height and leg length and a slimmer overall body. It was shown that the vertical stripe pattern was evaluated as more positive than the horizontal stripe pattern in the visual effect; particularly, the results showed distinct aspects in the classic pants style. The mutual influence of the visual effect (according to pants style and geometric pattern) were indicated as two factors of lower-body compensation and length compensation. A more positive visual effects resulted in a higher mutual influence on pant style and geometric pattern.

Application of the Through-Transmitted Ultrasonic Signal for the Identification of Two-Phase Flow Patterns in a Simulated High Temperature Vertical Channel

  • Chu In-Cheol;Song Chul-Hwa;Baek Won-Pil
    • Nuclear Engineering and Technology
    • /
    • 제36권1호
    • /
    • pp.12-23
    • /
    • 2004
  • In the present study a new measurement technique has been developed, which uses an ultrasonic transmission signal in order to identify the vertical two phase flow pattern. The ultrasonic measurement system developed in the present study not only provides the information required for the identification of vertical two phase flow patterns but also makes real time identification possible. Various vertical two phase flow patterns such as bubbly, slug, churn, annular flow etc. have been accurately identified with the present ultrasonic measurement system under atmospheric condition. In addition, the present test apparatus can practically simulate the ultrasonic propagation characteristics under high temperature and high pressure systems. Therefore, it is expected that the present ultrasonic flow pattern identification technique could be applicable to the vertical two phase flow systems under high temperature and high pressure conditions.

Overall 패턴 설계를 위한 기초 연구 (제1보) (A Study on the Proper Pattern of Overall (I))

  • 서미아;조승혜
    • 복식문화연구
    • /
    • 제5권2호
    • /
    • pp.245-252
    • /
    • 1997
  • In this study, the comfortable as well as good-looking overall patterns were investigated. To measure the maximum vertical spaces caused by the body movements, basic foundation type of overall pattern was made. The vertical spaces, which were measured using the CRO-SS-CUT method. The Result was as followings : The Maximum vertical space was 19.7㎝. The Maximum vertical space was 4.2㎝. The vertical space increased as the leg-movement angle increased.

  • PDF

한반도 서해상으로 장거리 이동하는 SO2의 농도 및 연직분포 특징 (The Vertical Distribution Patterns of Long Range Transported SO2 in Korea Peninsula)

  • 한진석;안준영;홍유덕;공부주;이석조;선우영
    • 한국대기환경학회지
    • /
    • 제20권5호
    • /
    • pp.671-683
    • /
    • 2004
  • This study was carried out to understand long-range transport of $SO_2$ using aircraft measurements for the identification of it's horizontal and vertical concentration and distribution pattern. Thirteen missions of aircraft measurements have been done around 37$^{\circ}$00'/124$^{\circ}$30' from October 1997 to November 2001. Concentrations of $SO_2$ was 1.5~2.0 ppb in the below mixing layer, 0.6~1.1 ppb in the above mixing layer. $SO_2$ was found to be relatively higher than marine background level, 0.08~0.2ppb, indicating the western coast being influenced by long-range transport except for the summer season. The vertical distribution of $SO_2$ was classified into 3 groups using its vertical sounding and meteorology pattern; the first is linear decay pattern, the second is exponential decay pattern, and the last is gaussian distribution pattern in the below mixing layer, 2 patterns of linear decay and gaussian distribution patterns in the upper layer. It is founded that vertical distribution pattern is strongly dependent on meteorological condition, for example atmospheric stability and predominant air flow.

바지 원형 설계에 직물의 신축성을 적용하는 방법에 대한 사례 연구 (A Case Study on Methodology Applying Fabric Stretch Property for Pants Pattern Drafting)

  • 천종숙;석은영;박순지
    • 한국의류학회지
    • /
    • 제22권2호
    • /
    • pp.185-192
    • /
    • 1998
  • The methodology of applying fabric stretch ratio in the grants pattern drafting was evaluated. The experimental fabrics employed in this study were 3 different knit fabrics with various stretch ratio in vertical or horizontal direction. The firm fitting pants pattern was modified by applying the fabric stretch ratio in vertical ana horizontal direction. The computer automatic drafting method was used for pants pattenl alteration. The suitability of the altered pattern was evaluated by the 7 clothing specialists, The results showed that fit of all experimental garments was improved in general. The garment which was constructed with the fabric having large difference between horizontal stretch ratio and vertical stretch ratio showed poor fit at crotch area. This result implies that computer aided pattern alteration is not appropriate when fabric stretch ratio is vary by the fabric directions.

  • PDF

벼의 생산력 분석 - (III) 군락구조의 동적변화 - (Analysis of Productivity in Rice Plant - (III) Dynamic Change of Canopy Structure -)

  • 박훈;박영선
    • Applied Biological Chemistry
    • /
    • 제15권1호
    • /
    • pp.41-47
    • /
    • 1972
  • 새로 육종된 다수성 품종인 IR 667-수원 213과 진흥을 사용하여 출수후 군락구조의 등적 변화를 질소영양과 관련하여 비교분석한 결과 다음과 같았다. 1. 군락주조 패턴 (출수기 건물중 수직분포)은 진흥에서는 수직형이고 IR 667에서는 수평형이었다. 2. 엽면적 밀도 (또는 무게)의 수직분포 패턴이 IR 667은 중앙부 우세형으로 진흥은 상부 우세형으로 분류되었다. 3. 군락구조 보존패턴과 엽면적 백분율 분포패턴은 엽면적밀도의수직분포패턴을 따랐다. 4. 군락보존력은 IR 667이 약하여 군락보존율이 낮으며 이는 엽의노화가 빠른것을 나타낸다. 5. 질소영양이 군락구조패턴에 거의 영향을 주지 않지만 질소의 느린공급(유황입힌요소)은 구조의 중앙부를 보존하여 상부우세형을 중앙부 우세형으로 변환 시키려는 경향을 보였으며 그것이 수량 증가의 원인이 된것같다. 6. 증앙부우세형과 상부우세형은 곡실생산에서의 상위엽의존형과 하위엽 의존형에 각기 잘 적합한것 같다.

  • PDF

반전력빔폭을 이용한 전방향성 안테나의 수중 환경 수직 평면 감쇠 모델 (Underwater E-plane Attenuation Model of Omnidirectional Antenna Using Half Power Beam Width (HPBW))

  • 곽경민;박대길;김영현;정완균;김진현
    • 제어로봇시스템학회논문지
    • /
    • 제21권11호
    • /
    • pp.1050-1056
    • /
    • 2015
  • In this paper, we use the characteristics of electromagnetic waves underwater attenuation for estimating linear distance between a transmitting node and receiving node, and research underwater vertical plane attenuation model for constructing the underwater localization system. The underwater localization of 2 dimensional with the plane attenuation model in the horizontal plane (H-plane) was proposed previous research. But for the 3 dimensional underwater localization, the additional vertical plane (E-plane) model should be considered. Because the horizontal plane of omnidirectional antenna has the same attenuation tendency in x-y plane according to the distance, whereas in vertical plane shows an irregular pattern in x-z plane. For that reason, in the vertical plane environment, the attenuation should be changed by the position and inclination. Hence, in this paper the distance and angle between transmitting and receiving node are defined using spherical coordinate system and derive an antenna gain pattern using half power beam width (HPBW). The HPBW is called a term which defines antenna's performance between isotropic and other antennas. This paper derives omnidirectional antenna's maximum gain and attenuation pattern model and define vertical plane's gain pattern model using HPBW. Finally, experimental verifications for the proposed underwater vertical plane's attenuation model was executed.

광경화성 단분자를 이용한 pattern free vertical alignment 모드의 전기 광학 특성 연구 (Study on electro optic characteristic of pattern free vertical alignment (PFVA) mode using the uv curable reactive mesogen (RM))

  • 조인영;황성진;김성민;황지혜;이승희
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 춘계학술대회 및 기술 세미나 논문집 디스플레이 광소자
    • /
    • pp.45-46
    • /
    • 2008
  • The conventional biased vertical alignment (BVA) mode has several advantages such as rubbing- and protrusion-free, wide-viewing angle and stable LC dynamics against external pressure. However manufacturing process of BVA mode is difficult task because the pixel and bias electrode signal are different in each frame. To solve this problem, we investigated the pattern free vertical alignment (PFVA) by using the UV-curable reactive mesogen (RM), in which the LC molecules were made to be pre-tilted. Eventually transmittance and response time in PFVA mode were found to be improved as compared to BVA mode.

  • PDF