• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.643-648
• /
• 1997

P.C Bearing Plate method, corresponding to the existing steel plate build-up method, is developed by the very first in domestic and is applied to the foundation in the HYUNDAI building at Kang-Nam. P. C Bearing Plate produced in ourself P.C plant can stand against vertical load of 7,000ton obtaining allowable force of soil. It is possible to minmize cost expediting, do site assembling and omit unnecessary excavation work by plant prefabrication of foundation member. The purpose of this paper is to study the optimum mixing design of Ultra-high strength concrete ($\acute{f}_{C91}$= 950kg/$\textrm{cm}^2$), crack control through measuring the heat of hydration, mock up test for the optimum curing method. As mentioned above, developing the Ultra-high strength Precast Concrete Bearing Plate set up successfully in the site foundation work of the HYUNDAI Building at Kang-Nam.

• 대한기계학회논문집B
• /
• 제21권3호
• /
• pp.350-357
• /
• 1997

The transient incompressible flow behind the axisymmetric bluff body is numerically simulated using the random vortex method(RVM). Based on the vorticity formulation of the unsteady Navier-Stokes equations, the Lagrangian approach with a stochastic simulation of diffusion using random walk technique is employed to account for the transport processes of the vortex elements. The numerical solutions for 2-dimensional recirculating flow behind a backward-facing step in the laminar range of Reynolds number are compared with experimental data. The present simulation focuses on the transitional flow regime where the recirculation zone behind the bluff body becomes highly unsteady and large-scale vortex eddies are shed from the bluff body wake due to intrinsic shear layer instabilities. The unsteady vertical flow structures and the mixing characteristics behind the bluff body are discussed in detail.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권3호
• /
• pp.1865-1877
• /
• 2013

Vertical variations of polycyclic aromatic hydrocarbon (PAH) concentrations in $PM_{10}$ were investigated in order to assess the factors controlling their behavior in the urban atmosphere of Bangkok City, Thailand. Air samples were collected every three hours for three days at three different levels at Bai-Yok Suit Hotel (site-1 and site-2) and Bai-Yok Sky Hotel (site-3) in February $18^{th}-21^{st}$, 2008. The B[a]P concentration showed a value 0.54 fold, lower than the United Kingdom Expert Panel on Air Quality Standard (UK-EPAQS; i.e. 250 pg $m^{-3}$) at the top level. In contrast, the B[a]P concentrations exhibited, at the ground and middle level, values 1.50 and 1.43 times higher than the UK-EPAQS standard respectively. PAHs displayed a diurnal variation with maximums at night time because of the traffic rush hour coupled with lower nocturnal mixing layer, and the decreased wind speed, which consequently stabilized nocturnal boundary layer and thus enhanced the PAH contents around midnight. By applying Nielsen's technique, the estimated traffic contributions at Site-3 were higher than those of Site-1: about 10% and 22% for Method 1 and Method 2 respectively. These results reflect the more complicated emission sources of PAHs at ground level in comparison with those of higher altitudes. The average values of incremental individual lifetime cancer risk (ILCR) for all sampling sites fell within the range of $10^{-7}-10^{-6}$, being close to the acceptable risk level ($10^{-6}$) but much lower than the priority risk level ($10^{-4}$).

• 대한공간정보학회지
• /
• 제5권1호
• /
• pp.57-70
• /
• 1997

전례적인 천문측량방법으로 연직선편차나 천문좌표를 결정하기 위해서는 별을 관측해야 하며 기상조건, 주변환경, 관측시간 및 측정기기 취급의 어려움 등 많은 제약조건이 수반되므로 좀더 효율적인 측정방법이 요구되고 있다. 본 연구에서는 WGS84좌표와 정표고를 이용하여 연직선 편차, 천문경도, 천문위도 및 천문방위각을 산정할 수 있는 프로그램을 구성하고 국내에 있는 10개의 천문점과 인접한 측점들에 대한 GPS 관측으로부터 천문성과를 산출하고 전통적인 천문측량방식 및 최신의 지구중력장모델(EGM96)에 의한 결과와도 비교 검토하므로서 GPS에 의한 연직선편차와 천문좌표의 산정법을 제시한 것이다.

• 농업과학연구
• /
• 제37권3호
• /
• pp.491-499
• /
• 2010

This study was carried out to investigate the consolidation characteristics of the remolded clay by the oedometer and the constant rate of strain(CRS) consolidation tests. As the rate of strain increases, the settlement rapidly decreased. As the ratio of the sand in the specimen increases, its effect on the rate of strain to the settlement was reduced. As the effective stress increased, the void ratio decreased, while the rate of strain increased, it did not show a clear variation. The reduction of the void ratio was shown to be less than the oedometer test. The coefficient of vertical consolidation with effective stress showed very large variation around preconsolidation stress, but the rate of strain did not provide significant effects. The rate of strain with effective stress gradually decreased at all tests and mixed ratio of sand. The rate of strain at the constant rate of strain tests showed smaller than in the oedometer test. The coefficient of consolidation at the constant rate of strain tests showed much more increase than in the oedometer test. The ratio of the vertical coefficient of consolidation by the odometer and the constant rate of strain tests showed a large difference according to various tests method and mixing ratio. Therefore, it is recommended that careful attention should be paid to designing the soft ground improvement.

• 한국전기전자재료학회논문지
• /
• 제15권4호
• /
• pp.367-372
• /
• 2002

The vertically well-aligned carbon nanotubes(CNTs) were successfully grown on Ni coated silicon wafer substrate by DC bias-assisted PECVD(Plasma Enhanced Chemical Vapor Deposition). As a catalyst, Ni thin film of thickness ranging from 15~30nm was prepared by electron beam evaporator method. In order to find the optimum growth condition, the type of gas mixture such as $C_2H_2-NH_3$ was systematically investigated by adjusting the gas mixing ratio at $570^{\circ}C$ under 0.4Torr. The diameter of the grown CNTs was 40~200nm and the diameter of the CNTs increased with increasing the Ni particles size. TEM images clearly showed carbon nanotubes to be multiwalled. The measured turn-on field was $3.9V/\mu\textrm{m}$ and an emission current of $1.4{\times}10^4A/\textrm{cm}^2$ was $7V/\mu\textrm{m}$. The CNTs grown by bias-assisted PECVD was able to demonstrate high quality in terms of vertical alignment, crystallization of graphite and the processing technique at low temperature of $570^{\circ}C$ and this can be applied for the emitter tip of FEDs.

• 한국지반신소재학회논문집
• /
• 제15권3호
• /
• pp.27-37
• /
• 2016

국내 GCP공법은 많은 선행연구가 진행되었으나, 설계자의 경험에 의해 의존하여 설계되고 있는 실정이므로 파괴사례가 종종 보고되고 있다. 이에 따라 명확한 파괴 원인규명 및 파괴예방대책 수립이 어려운 실정이다. 따라서 본 연구에서는 GCP공법의 합리적인 설계법의 제안을 위한 기초단계로써, GCP에 사용되는 최적배합비를 대형직접전단시험을 통해 결정하고, 내부마찰각의 변화에 따른 응력분담비의 변화 및 지반의 수직/수평 침하거동을 수치해석을 통하여 분석하였다. 직접전단 실험결과 쇄석과 모래의 최적배합비는 70:30으로 평가되었다. 수치해석결과 내부마찰각이 증가할수록 응력분담비가 증가하나 일정한 값으로 수렴하고 침하량이 감소하며, 최적배합비로 시공할 경우 측방유동 및 히빙현상의 감소를 유도할 것으로 판단된다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1447-1450
• /
• 2005

Carbon nanotube field emission display devices were fabricated using screen printing techniques. The CNT pastes are composed of organic binder, CNT, and additive materials such as glass frit, silver or ITO powders. The change in mixing ratio of various organic binders in CNT paste varied the electron emission characteristics. With increasing the contents of additive materials in CNT paste, turn-on field were increased, leading to decrease in electron emission current. The post-treatment process in this study induced the vertical alignment of carbon nanotubes on glass, resulting in the improvement of electron emission uniformity.

• 한국지반신소재학회논문집
• /
• 제13권2호
• /
• pp.11-20
• /
• 2014

대단위 부지조성을 위해 해안연약지반을 매립후 공기단축 및 안정된 부지를 조성하고자 대부분 연직배수재를 이용하여 지반 개량을 시행한다. 이 과정에서 연약지반내 설치한 연직배수재를 통하여 지반내 간극수가 지표면의 수평배수층으로 이동하여 외부로 배출된다. 과거에는 이 수평배수층 재료로 모래를 사용하였으나 근래에는 재료 품귀 및 단가 상승으로 쇄석으로 조성하는데 상부 성토층과 혼재를 방지하기 위하여 토목섬유(P.P. Mat)를 설치한다. 토목섬유의 설치시 재료비 및 시공비가 발생하여 토목섬유 적용 필요성에 대하여 실내에서 모형토조를 이용하여 단계별로 하중을 달리하고 유입량을 변화시켜 실험한 결과 토목섬유 적용에 따른 통수능에는 큰 차이가 없음을 알 수 있었다.

• 한국지반환경공학회 논문집
• /
• 제13권6호
• /
• pp.83-90
• /
• 2012

일반적으로 심층혼합공법에 의한 점토지반의 개량효과는 물리적 개량효과에 비해서 훨씬 크며 조기에 큰 개량 강도를 얻을 수 있으나, 국내 시공실적이 부족하고 시멘트-점토의 혼합방법에 따른 품질관리에 문제점이 있는 것으로 알려져 있다. 본 연구에서는 시멘트, 모래, 점토의 배합비에 따른 강도특성과 연직MAT의 형태에 따른 연약지반의 개량특성을 파악하기 위해 해성점토를 이용하여 일축압축 강도시험과 모형토조시험을 수행하였다. 일축압축강도 시험을 위한 공시체는 시멘트와 물의 중량비를 기준으로하여 모래를 일정 비율로 혼합하였고, 시멘트는 점토중량대비 각각 10%, 20%, 30%, 40%를 혼합하였고 대상지반토의 함수비는 40%, 60%, 80%로 조정하여 제작하였다. 공시체는 습윤방법을 이용하여 7일, 14일, 28일간 양생하여 양생기간에 따른 일축압축강도시험을 수행하였다. 지지력시험은 모형토조를 제작하고 Mat식으로 개량한 지반을 형성한 다음 개량률에 따른 지지력을 비교하고 연직MAT 장벽 상호간의 간섭효과를 분석하였다.