• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 추계학술대회
• /
• pp.438-440
• /
• 2010

스마트폰 시장의 확대와 수요가 급증함에 따라 무선 트래픽이 급격히 증가하고 있다. 이를 해결하기 위해 Wi-Fi를 이용하여 무선 트래픽을 분산하려 한다. 스마트폰에 3G 무선 인터페이스와 Wi-Fi, 블루투스 등의 여러 인터페이스가 있어 활용할 수 있다. 그러나 스마트폰과 기반 네트워크에서 같은 인터페이스 상에서의 핸드오버는 지원하지만, 다른 인터페이스 간의 Vertical 핸드오버를 끊김 없이 제공하지 않는다. 이로 인해 사용자들은 서비스 연속성을 지원받을 수 없게 된다. 본 논문은 IEEE 802.21에서 진행된 장치 독립 핸드오버(MIH) 표준에 대하여 기술한다. 802.21 MIH 표준은 이기종 네트워크간 심리스한 수직 핸드오버 서비스를 목적으로 진행되었다. 현재 802.21 표준은 이미 완성단계이고 관련기술의 이슈사항에 대하여 부가적인 부분을 표준화하고 있다.

• 한국추진공학회지
• /
• 제20권4호
• /
• pp.87-93
• /
• 2016

직접 연결식(DC) 고도모의 엔진시험 수행 시, 공기 흡입 덕트와 항공용 엔진 사이에 래버린스 씰이 설치된다. 래버린스 씰은 이 둘을 기계적으로 격리시킴으로써 주추력 및 측추력을 보다 정확하게 측정할 수 있도록 돕는다. 하지만 덕트 내부 공급공기에 높은 수직 온도구배가 발생할 경우, 래버린스 씰의 격리가 파괴되어버린다. 본 논문에서는 이러한 접촉 문제를 해결하기 위한 노력의 일환으로 래버린스 씰 온도 제어장치를 제작/설치하였다. 본 장치를 실제 항공용 엔진시험에 적용한 결과, 높은 수직 온도구배가 생성되어도 래버린스 씰의 격리가 잘 유지되는 것을 확인할 수 있었다.

• 한국농촌건축학회논문집
• /
• 제20권2호
• /
• pp.11-18
• /
• 2018

The purpose of this study is to analyze the structure and use change of the private space according to the balcony expansion and use it as the data of plan design. According to Bay, front length/width ratio and the change of balcony space before and after expansion of space organization of house units were analyzed. Common characteristics of Flat type and Tower type are an increase of the frontage length of house units in an apartment, an increase of the number of front bay, and an increase of integrated LDK focusing on living room. A difference is that Flat type shows high frontage ratio, Bay figure, and spatial arrangement favorable to front openness and lighting. Flat type shows higher area distribution than Tower type in LDK area distribution located in at the plane center. Spatial expandability and visual openness of Flat type are more beneficial than those of Tower type in the planning, and a balcony extension of house units has developed to direction to open more. Tower type creates various block images through a combination of house units focusing on the core. Uses after balcony expansion are area expansion of a balcony-neighboring room, storage space, expansion and function improvement of the variable range, and specialized space different from a neighboring room. In addition, there is no escapable space except for a shelter, so unit plan should be prepared to prevent using it other space of a shelter and to solve moving line of two-way horizontal refuge and vertical refuge.

• Imaging Science in Dentistry
• /
• 제42권2호
• /
• pp.83-88
• /
• 2012

Purpose : The aim of this study was to investigate the initial effects of maxillary expansion therapy with Hyrax appliance and to evaluate the related changes in maxillary sinus volume. Materials and Methods : Thirty patients (20 females, 10 males; 13.8 years) requiring maxillary expansion therapy, as part of their comprehensive orthodontic treatment, were examined. Each patient had cone-beam computed tomography (CBCT) images taken before (T1) and after (T2) maxillary expansion therapy with a banded Hyrax appliance. Multiplanar slices were used to measure linear dimensions and palatal vault angle. Volumetric analysis was used to measure maxillary sinus volumes. Student t tests were used to compare the pre- and post-treatment measurements. Additionally, differences between two age groups were compared with Mann-Whitney U test. The level of significance was set at p=0.05. Results : Comparison of pre-treatment to post-treatment variables revealed significant changes in the transverse dimension related to both maxillary skeletal and dental structures and palatal vault angle, resulting in a widened palatal vault (p<0.05). Hard palate showed no significant movement in the vertical and anteroposterior planes. Nasal cavity width increased on a mean value of 0.93mm(SD=0.23, p<0.05). Maxillary sinus volume remained virtually stable. No significant age differences were observed in the sample. Conclusion : Hyrax expansion therapy did not have a significant impact on maxillary sinus volume.

• 한국재난정보학회 논문집
• /
• 제18권1호
• /
• pp.1-9
• /
• 2022

연구목적: 본 연구에서는 토목섬유 연직차수시스템에 사용되는 팽창 지수재를 사용하여 지수재의 팽창에 따른 차수성능을 평가하였다. 연구방법: 토목섬유 연직차수 공법 적용시 연결부에 대한 투수능을 판단하기 위하여 ASTM D5887과 ASTM D6766을 준용하였다. 팽창 지수재를 각 용액에 포화시킨 후 시간경과에 따른 무게, 두께, 부피 변화를 분석하였으며, 토목섬유 연직차수벽 연결부에 팽창지수재를 설치하여 투수 특성을 평가하였다. 연구결과: 염수조건에서 지수재의 팽창반응 시간이 상대적으로 늘어남에 따라 투수능의 저하도 담수에서 보다 작은 감소폭을 나타내었다. 또한 토목섬유 연직차수재료의 결속 방법에 따라 롤 이음방식이 인터록 방식 보다 수두차에 의한 압력저항이 커서 차수성능이 다소 우수하게 나타났다. 결론: 주유소, 유류저장시설 및 산업단지 등 오염물의 유출을 추정할 수 있는 도심지 오염원에서는 오염물질 확산을 방지할 수 있는 사전대응 기술이 피해규모를 현격하게 감소시킬 수 있다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.777-784
• /
• 2000

During past earthquakes several bridges have failed due to a loss of support at their bearings, seats, and/or expansion joints. Most efforts to prevent this have been directed toward tying bridges together at their bearings and expansion joints. Longitudinal restrainers are installed to limit the relative displacement at joints and thus decrease the chance of a loss of support as these locations. Transverse restrainers are necessary in many cases to keep the superstructure from sliding off in the transverse direction. Vertical restrainers are used at bearings to prevent uplifting deck, but usually not economically justified unless additional bearing retrofit is being performed. To obtain this three function of restrainer, a universal restrainer is developed. The load capacities were evaluated in static and dynamic experimental test. The test results show that the measured capacity or strength of the bridge deck restrainer is similar to that of design value.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.406-411
• /
• 2001

The expandable implant employs an inner expansion screw in order to expand several legs of implant. Compressive stresses are produced at the bone tissue surrounding the implant, and the contact area between the implant and the bone tissue is increased, which result in increased resistance to horizontal and vertical pressure loads. The stress distribution in implant is also an important factor. Three types of implant models including an existing one have been investigated by using the Finite Element Method, and an improved design model has been suggested.

• 마이크로전자및패키징학회지
• /
• 제24권1호
• /
• pp.35-43
• /
• 2017

The three-dimensional integrated circuit (3D-IC) is a general trend for the miniaturized and high-performance electronic devices. The through-silicon-via (TSV) is the advanced interconnection method to achieve 3D integration, which uses vertical metal via through silicon substrate. However, the TSV based 3D-IC undergoes severe thermo-mechanical stress due to the CTE (coefficient of thermal expansion) mismatch between via and silicon. The thermo-mechanical stress induces mechanical failure on silicon and silicon-via interface, which reduces the device reliability. In this paper, the thermo-mechanical reliability of TSV based 3D-IC is reviewed in terms of mechanical fracture, heat conduction, and material characteristic. Furthermore, the state of the art via-level and package-level design techniques are introduced to improve the reliability of TSV based 3D-IC.

• 한국해양공학회지
• /
• 제14권2호
• /
• pp.19-27
• /
• 2000

In this paper hydroelastic responses of a very large floating structure(VLFS) are studied theoretically. We have been developed the source and dipole distribution method and pressure distribution method to evaluate the hydrodynamic pressures. The problem of vertical structural responses due to waves are calculated by using finite element method(FEM) and modal expansion method of a free-free beam Hydroelastic responses of VLFS in waves are computed by four methods developed in this paper. As a result the theoretical results of motion responses show good agreements with experimental ones.

• 한국해안·해양공학회논문집
• /
• 제20권6호
• /
• pp.553-563
• /
• 2008

만일 임의의 지형을 다수의 계단으로 근사하면 이 지형 위를 지나는 선형 파랑의 변형을 계산하기 위해 변분근사법과 고유함수 전개법을 사용할 수 있다. 본 논문에서는 반사율과 투과율을 계산하기 위해 변분근사식과 연계된 산란체법을 제시하였다. 본 기법은 O'Hare and Davies의 변환행렬 축차법보다 간단하고 직접적인 방법임을 보였다. 또한 수 개의 수치실험을 실시하여 기존 결과와 거의 같은 결과를 얻었다.