• IEIE Transactions on Smart Processing and Computing
• /
• 제2권4호
• /
• pp.189-196
• /
• 2013

This paper presents a two-stage approach to detect pedestrians in video sequences taken from a moving vehicle. The first stage is a preprocessing step, in which potential pedestrians are hypothesized. During the preprocessing step, a difference image is constructed using a global motion estimation, vertical and horizontal edge maps are extracted, and the color difference between the road and pedestrians are determined to create candidate regions where pedestrians may be present. The candidate regions are refined further using the vertical edge symmetry features of the pedestrians' legs. In the next stage, each hypothesis is verified using the integral channel features and an AdaBoost classifier. In this stage, a decision is made as to whether or not each candidate region contains a pedestrian. The proposed algorithm was tested on a range of dataset images and showed good performance.

• 대한전자공학회논문지SD
• /
• 제41권1호
• /
• pp.35-46
• /
• 2004

Vertical-Cavity Surface-Emitting Laser(VCSEL)는 짧은 공진기(cavity)와 여러 층의 distributed Bragg reflector(DBR)층을 거울로 사용하기 때문에, edge-emitting lasers(EELs)와는 달리, 광출력 및 변환효율 등의 예측이 쉽지 않다. 그 주된 원인은 VCSEL에서는 Fabry-Perot 레이저와는 달리, 각각의 DBR 거울 층들이 손실을 가지고 있기 때문으로 이에 따라 상/하향광출력 비나 변환효율을 계산해 내는 데에 어려움이 있다. 그러나 전달 행렬 방법(transfer matrix method, TMM)을 이용하면, VCSEL과 같은 여러 층을 갖는 구조에서의 성능 지수를 정확히 계산할 수 있다. 이 논문에서는 전달 행렬 방법을 이용하여 VCSEL의 구조 변화에 따른 문턱이득, 문턱전류 밀도 및 변환효율을 구하였으며 문턱전류 및 변환효율 모두를 고려한 VCSEL의 최적 구조 설계 기법을 제시하였다.

• 대한치과보철학회지
• /
• 제9권1호
• /
• pp.35-40
• /
• 1969

The author measured vertical dimension of 675(326 of male and 349 of female) in normal Korean adult from 20 to 50 years of age between upper and lower muco-buccal fold on upper and lower central incisal portion at centric occlusion state. The following results were obtained.; 1) The distances from upper muco-buccal fold on upper anterior central incisal portion to lower muco-buccal fold on lower anterior central incisal portion at centric occlusion state were 37.57mm in male, 36.80mm in female and 37.19mm in average. The distances in male were longer than those of female. 2) According to increase age(from 20 to 50 years of age), the tendencies of vertical dimensional changes were increased slightly in 30~40 years group and decreased after 40 year in both sex. 3) The distances from upper muco-buccal fold on upper anterior central portion to upper central incisal edge were 20.77mm and from lower muco-buccal fold on lower anterior central incisal portion to lower central incisal edge were 18.88mm. The ratio between maxillary distances and mandibular distances was 1.4:0.9.

• 한국정밀공학회지
• /
• 제21권8호
• /
• pp.97-105
• /
• 2004

The vertical roller mill is the important machine grinding and mixing various crude materials in the manufacturing process of portland cement. Table liner is one of grinding elements of vertical roller mill and is subjected to the cyclic bending stress by rollers and the centrifugal force by rotation of table. It demands $4{\times}10^7$ expense of life but has $4{\times}10^6~-8{\times}10^6$ cycle. It fractures at the edge of grinding path of outside roller The repair expense fur it amounts to 30% of total maintenance of vertical roller mill. Therefore, this study shows the fracture mechanism of table liner of vertical roller mill using HDM and fatigue analysis

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.163-169
• /
• 2003

The vertical roller mill is the important machine grinding and mixing various crude materials in the manufacturing process of portland cement. Table liner is one of grinding elements of vertical roller mill and is subjected to the cyclic bending stress by rollers load and the centrifugal force by rotation of table. It demands $4{\times}10^7$ cycle but has $4{\times}10^6{\sim}8{\times}10^6$ cycle. It fractures at the edge of grinding path of outside roller. The repair expense for it amounts to 30% of total maintenance of vertical roller mill. Therefore, this study shows the fracture mechanism of table liner for vertical roller mill using HDM and fatigue analysis

• Geomechanics and Engineering
• /
• 제12권6호
• /
• pp.965-981
• /
• 2017

Stability of vertical escarpments has been the subject of discussion for long time. However, available literature provides scarce knowledge about the effect of the formation of undercut and surface cracks on the stability of a vertical escarpment. The present study deals with a systematic analysis of the effect of surface cracks and undercut on slope stability using finite element based lower bound limit analysis. In the present analysis, the non-dimensional stability factor (${\gamma}H/c$) is used to inspect the degrading effect of undercut and cracks developed at different offset distances from the edge of the vertical escarpment. Failure patterns are also studied in detail to understand the extent and the type of failure zone which may generate during the state of collapse.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1130-1135
• /
• 2004

The vertical roller mill is the important machine grinding and mixing various crude materials in the manufacturing process of portland cement. Vertical roller mill is subjected to the cyclic bending stress by rollers load. It demands $4{\times}10^7$ cycle but has $4{\times}10^6{\sim}8{\times}10^6$ cycle. It fractures at the edge of grinding path of outside roller. The repair expense for it amounts to 30% of total maintenance. Therefore, this study shows optimal design for vertical roller mill using DOE and neural network.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.476-476
• /
• 2009

Periodic vortex separations generate periodic vertical forces acting on a trailing edge of an airfoil. When a natural frequency of the trailing edge of the airfoil is close to a vortex shedding frequency, an amplitude of the edge oscillation becomes maximal; it makes intensive noise called singing. Motion of the trailing edge may also feedback to the vortex shedding so that self-sustained oscillation appear, and a resonant frequency is locked in some interval of the speed of the incident flow. In this study, a theoretical model is proposed and applied for modeling an airfoil singing. Results are compared with experimental measurements which are carried out in an anechoic wind tunnel.

• 한국소음진동공학회논문집
• /
• 제20권2호
• /
• pp.115-121
• /
• 2010

Periodic vortex separations generate periodic vertical forces acting on a trailing edge of an airfoil. When a natural frequency of the trailing edge of the airfoil is close to a vortex shedding frequency, an amplitude of the edge oscillation becomes maximal; it makes intensive noise called singing. Motion of the trailing edge may also feedback to the vortex shedding so that self-sustained oscillation appears, and a resonant frequency is locked in some interval of the speed of the incident flow. In this study, a theoretical model is proposed and applied for modeling an airfoil singing. Results are compared with experimental measurements which are carried out in an anechoic wind tunnel.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.756-759
• /
• 2004

We present a piezoelectric actuator using stiffness control and stroke amplification mechanism in order to make large lateral displacement. In this work, we suggest stiffness control approach that generates lateral displacement by increasing the vertical stiffness and reducing the lateral stiffness using additional structure. In addition, an additional structure of a serpentine spring amplifies the lateral displacement like leverage structure. The suggested lateral PZT actuator (bellows actuator) consists of serpentine spring and PZT/electrode layer which is located at the edge of the serpentine spring. The edge of the serpentine spring prevents the vertical motion of PZT layer, while the other edge of the serpentine spring makes stroke amplification like leverage structure. We have determined dimensions of the bellows actuator using ANSYS simulation. Length, width and thickness of PZT layer are 135$\mu$m, 20$\mu$m and 0.4$\mu$m, respectively. Dimensions of the silicon serpentine spring are thickness of 25$\mu$m, length of 300$\mu$m, and width of 5$\mu$m. The bellows actuator has been fabricated by SOI wafer with 25$\mu$m-top silicon and 1$\mu$m-buried oxide layer. The bellows actuator shows the maximum 3.93$\pm$0.2$\mu$m lateral displacement at 16V with 1Hz sinusoidal voltage input. In the frequency response test, the fabricated bellows actuator showed consistent displacement from 1Hz to 1kHz at 10V. From experimental study, we found the bellows actuator using thin film PZT and silicon serpentine spring generated mainly laterally displacement not vertical displacement at 16V, and serpentine spring played role of stroke amplification.