• Imaging Science in Dentistry
• /
• v.38 no.2
• /
• pp.103-107
• /
• 2008

Purpose: The purpose of this study was to evaluate the relationship between the position of mesiodens and its complications. Materials and Methods: The subjects for this study consisted of 172 patients with mesiodens. Panoramic radiographs and cross-sectional tomography were taken of all of the subjects. Their clinical records and radiographs were analyzed in order to study the direction and vertical and sagittal position of mesiodens, as well as complications caused by mesiodens. Results: The number of mesiodens was one in 112 cases (65.1%) and two in 60 cases (34.9%). Complications were found in 121 mesiodentes (52.2%), with being median diastema the most frequent. The incidence of complications was high in erupted mesiodens (75.0%), in horizontal mesiodens (89.8%) and in mesiodens located within the arch (75.7%), but was low in mesiodens impacted above apex (29.8%), in normal position (34.4%) and in palatally positioned mesiodens (46.5%). Conclusion: It was suggested that the frequency of complications was different according to the vertical position, the direction of the crown and the sagittal position.

• Bulletin of the Korean Mathematical Society
• /
• v.31 no.2
• /
• pp.237-242
• /
• 1994

One of the most well-known geometric lattices is a partition lattice. Every upper interval of a partition lattice is a partition lattice. The whitney numbers of a partition lattices are the Stirling numbers, and the characteristic polynomial is a falling factorial. The set of partitions with a single non-trivial block containing a fixed element is a Boolean sublattice of modular elements, so the partition lattice is supersolvable in the sense of Stanley [6]. In this paper, we rephrase four results due to Heller[1] and Murty [4] in terms of matroids and give several characterizations of partition lattices. Our notation and terminology follow those in [8,9]. To clarify our terminology, let G, be a finte geometric lattice. If S is the set of points (or rank-one flats) in G, the lattice structure of G induces the structure of a (combinatorial) geometry, also denoted by G, on S. The size vertical bar G vertical bar of the geometry G is the number of points in G. Let T be subset of S. The deletion of T from G is the geometry on the point set S/T obtained by restricting G to the subset S/T. The contraction G/T of G by T is the geometry induced by the geometric lattice [cl(T), over ^1] on the set S' of all flats in G covering cl(T). (Here, cl(T) is the closure of T, and over ^ 1 is the maximum of the lattice G.) Thus, by definition, the contraction of a geometry is always a geometry. A geometry which can be obtained from G by deletions and contractions is called a minor of G.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.402.1-402.1
• /
• 2014

Photonic force microscopy (PFM) is an optical tweezers-based scanning probe microscopy, which measures the forces in the range of fN to pN. The low stiffness leads proper to measure single molecular interaction. We introduce a novel photonic force microscopy to stably map various chemical properties as well as topographic information, utilizing weak molecular bond between probe and object's surface. First, we installed stable optical tweezers instrument, where an IR laser with 1064 nm wavelength was used as trapping source to reduce damage to biological sample. To manipulate trapped material, electric driven two-axis mirrors were used for x, y directional probe scanning and a piezo stage for z directional probe scanning. For resolution test, probe scans with vertical direction repeatedly at the same lateral position, where the vertical resolution is ~25 nm. To obtain the topography of surface which is etched glass, trapped bead scans 3-dimensionally and measures the contact position in each cycle. To acquire the chemical mapping, we design the DNA oligonucleotide pairs combining as a zipping structure, where one is attached at the surface of bead and other is arranged on surface. We measured the rupture force of molecular bonding to investigate chemical properties on the surface with various loading rate. We expect this system can realize a high-resolution multi-functional imaging technique able to acquire topographic map of objects and to distinguish difference of chemical properties between these objects simultaneously.

• Korean Journal of Applied Biomechanics
• /
• v.24 no.3
• /
• pp.277-285
• /
• 2014

Nakcyguri is one of the offensive weapons most often used in Taekkyon games, The purpose of this study was to investigate kinetic factors on two types of Nakcyguri, one of which uses hip bending and the other uses little it. 12 taekkyoners (males) who are the students of Y University participated in this study. They have been practicing on Taekkyon for five years or more. Positions of CoM, the elapsed time of each phase, ROM of joint and segment angles, ground reaction forces, joint moments of supporting leg were analyzed for this study. The results were as follows; in Nakcyguri with hip bending than without hip bending, anterior/posterior ROM of pelvis, head and swing foot were larger by flexing-extending more, and both vertical and posterior components of GRF were larger during phase 4. It was considered that hip bending produced posterior momentum as well as vertical momentum of trunk during Nakcyguri. In conclusion hip bending was essential and so useful to the successful attack.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.1
• /
• pp.10-17
• /
• 2016

When a planing hull straightly runs and turns, its floating position and pitch angle are changed depending on its speed, and large transient motion happens. In this paper, six degrees of freedom(6 DOF) equations of motion, which could simulate the motion of a planing hull, are established. Static and dynamic forces in vertical plane are modeled using pre-calculated displacements and metacentric heights depending on various draft, lift under bottom, and vertical damping coefficients which are used to tune the final motion. Hydrodynamic coefficients in horizontal plane at various equilibrium state are calculated by using Lewandowski's empirical formula and the speed-dependent equilibrium state are calculated beforehand by Savitsky's formula. The speed effects are considered by curve-fitting the coefficients at various speed to the polynomials. Accelerating, decelerating and backing, turning, and zig-zag are simulated and compared with the sea trial results, and it is confirmed that the speed reduction, roll, and pitch during such maneuvers of sea trial and simulation are well consistent.

• Economic and Environmental Geology
• /
• v.26 no.1
• /
• pp.29-40
• /
• 1993

Several vermiculite deposits occur as the alteration product from phlogopite in ultramafic rock, in the Hongseong and Cheongyang area, South Korea. Some quarries show well-defined weathering profile. Samples collected from those quarries were examined by XRD and chemistry to define a vertical variations in mineralogy and chemistry of the weathering profile developed on ultramafic rocks. The analysis by X-ray diffractometry showed that mineral compositions changed continuously as depth of profile increasing, the vermiculite-the phlogopite/vermiculite interstratified-the phlogopite. Chemical analysis of bulk samples in altered zone revealed that regardless of composition and kinds of mineral in the rock, there are significant increase of MgO, CaO and $H_2O$, and decrease of K as depth of profile decrease reflecting the characteristics in vermiculitization. Also, there was a tendency that weathering indicies of each sample horizon change gradually with increasing depth. This tendency can be explained as variations of degree of vermiculitization. The regular changes of mineralogical and chemical composition in vertical profile suggest that weathering is the most important process in vermiculitization in this area.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.47 no.6
• /
• pp.1055-1062
• /
• 2014

Hydroacoustic surveys were conducted for spatio-temporal distribution and size estimation of fish in the Yongdam reservoir, Korea, from April to July 2014. Acoustic data were collected along acoustic transects using a 120 kHz scientific echosounder. The received acoustic data were the in situ acoustic target strength (dB) and nautical area scattering coefficient ($m^2/mile^2$). Data on fish behavioral patterns and size were collected using a DIDSON acoustic camera at stationary stations. Fish were mainly distributed in the center channel and close to the outer Yongdam reservoir. Acoustic density of fish in the summer season were higher than in the spring season. The seasonal vertical distribution pattern of fish aggregations may be strongly related to the vertical temperature structure. The size distribution of fish obtained from an acoustic camera correlated well with the acoustic size of fish from an echosounder.

• Geotechnical Engineering
• /
• v.12 no.1
• /
• pp.5-20
• /
• 1996

In order to accelerate the rate of consolidation settlement and to gain a required shear strength for a given soft clay deposit, the preloading technique combined with a vertical drainage system has been widely applied. In this'study, the theory of axisymmetric consolidation which considers the variation of compressibility and permeability during the conslidation process, has ben developed. A computer program named AXICON for the analysis of axisymmetric nonlinear consolidation is developed by adopting an explicit finite difference method. Smear and well resistance effects are also considered. The AXICON is capable of analyzing the consolidation behavior of multi -layered deposits and simulates time dependent loading sequence. The results of AXICON are validated with analytical solutions of Hansbo and Barron, and compared with insitu settlements and pore pressures measured in a soft clay deposit.

• Structural Engineering and Mechanics
• /
• v.37 no.3
• /
• pp.297-307
• /
• 2011

Meck Plot is an adapted version of the well-known Southwell method to the case of lateral-torsional buckling, which indeed reflects the physical inter-dependence of lateral flexure (lateral displacement) and torsion (rotation) in the structure. In the recent reported studies, it has been shown experimentally and theoretically that lateral displacement of an I-beam undergoing elastic lateral-distortional mode of buckling is interestingly directly coupled with other various deformation characteristics such as web transverse strain, web longitudinal strain, vertical deflection, and angles of twist of top and bottom flanges, and consequently good results have been obtained as a result of application of the Meck's method on lateral displacement together with each of the aforementioned deformation variables. In this paper, it is demonstrated that even web transverse and longitudinal strains, vertical deflection, and angles of twist of top and bottom flanges of an I-beam undergoing elastic lateral-distortional buckling are two-by-two directly coupled and the application of the Meck Plot on each pair of these deformation variables may still yield reliable predictions for the critical buckling load.

• Structural Engineering and Mechanics
• /
• v.35 no.6
• /
• pp.759-772
• /
• 2010

Seismic isolation is a well-known method to mitigate the earthquake effects on structures by increasing their fundamental natural periods at the expense of larger displacements in the structural system. In this paper, the seismic response of isolated and fixed base vertical, cylindrical, liquid storage tanks is investigated using a Finite Element Model (FEM), taking into account fluid-structure interaction effects. Three vertical, cylindrical tanks with different ratios of height to radius (H/R = 2.6, 1.0 and 0.3) are numerically analyzed and the results of response-history analysis, including base shear, overturning moment and free surface displacement are reported for isolated and non-isolated tanks. Isolated tanks equipped by lead rubber bearings isolators and the bearing are modeled by using a non-linear spring in FEM model. It is observed that the seismic isolation of liquid storage tanks is quite effective and the response of isolated tanks is significantly influenced by the system parameters such as their fundamental frequencies and the aspect ratio of the tanks. However, the base isolation does not significantly affect the surface wave height and even it can causes adverse effects on the free surface sloshing motion.