• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.581-590
• /
• 2008

A SWP method is a revolutionary dewatering method. The conventional dewatering method, deep-well method, had ever occurred a civil appeal caused by the well depletion in compliance with the reduction of the groundwater level over a wider area considerably by the deep-well pumping from homogeneous sand-layer ground for a dry-work, while pump groung excavation working in Sendai city, Japan 10 years ago. it'd developed with the problematic proposal to find the new method which can lower the groundwater level only within the sheet pile without any reduction of groundwater outside of the sheet pile and until currently steady improvement came. It's been confirmed with plenty of executional results that there was almost no decreasing of water-level from surroundings, over so many construction-sites including vertical shafts which completely does not enter into non-water permeable layer and pumping ground etc. The SWP method in this time has been introducing initially and carried into a the execution tentatively at a construction-site and made a various result get through the execution.

• Journal of Advanced Navigation Technology
• /
• v.8 no.2
• /
• pp.91-97
• /
• 2004

This paper presents the development of InGaAsP multiple quantum well asymmetric Fabry-Perot modulators(AFPM), which have a vertical structure and high performance and describes measurements of devices operating at 10GHz for next generation broadband wireless communication applications such as picocell systems. Advantages of the AFPM include low drive voltage, which is less than -2V, and -3dB coupling loss, good flatness of the frequency response and simple fiber alignment. A simple link demonstration has been introduced, resulting in 92dB/Hz spurious free dynamic range and 40dB inter-modulation distortion. This modulator could be use for broadband radio over fiber systems such as picocell and multiple RF links.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.723-730
• /
• 2003

In general, well log and core data have been utilized for reservoir characterization. These well data can provide valuable information on reservoir properties with high vertical resolution at well locations. While the seismic surveys cover large areas of field but give only indirect features about reservoir properties. Therefore it is possible to estimate the reservoir properties guided by seismic data on entire area if a relationship of seismic data and well data can be defined. Seismic attributes calculated from seismic surveys contain the particular reservoir features, so that they should be extracted and used properly according to the purpose of study. The method to select the suitable seismic attributes among enormous ones is needed. The stepwise regression and fuzzy curve analysis based on fuzzy logics are used for selecting the best attributes. The relationship can be utilized to estimate reservoir properties derived from seismic attributes. This methodology is applied to a synthetic seismogram and a sonic log acquired from velocity model. Seismic attributes calculated from the seismic data are reflection strength, instantaneous phase, instantaneous frequency and pseudo sonic logging data as well as seismic trace. The fuzzy curve analysis is used for choosing the best seismic attributes compared to sonic log as well data, so that seismic trace, reflection strength, instantaneous frequency, and pseudo sonic logging data are selected. The relationship between the seismic attribute and well data is found out by the statistical regression method and estimates the reliable well data at a specific field location derived from only seismic attributes. For a future work in this study, the methodology should be checked an applicability of the real fields with more complex and various reservoir features.

• Journal of the Korean GEO-environmental Society
• /
• v.24 no.1
• /
• pp.51-60
• /
• 2023

Unlike the vertical drilling in the directional drilling should be minimized torque and drag in the well trajectory that avoided problems such as drillstring transformation, casing wear and key-seating. These torque and drag magnitude is determined by variations such as the well trajectory geometry, drilling mud, drillstring type and kick-off point. Therefore, it is essential to consider these variations for designing directional well trajectory. In this study, it was selected well trajectory by the most common build-hold type well and calculated torque and drag on each section by Analytical friction model. Analysis indicates that torque and drag could be minimized by using high lubricity drilling mud, kick-off point appropriate according to the well geometry and possible minimize dogleg severity. The results of this study is useful to minimize torque and drag from directional well trajectory design.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.3 no.1
• /
• pp.1-8
• /
• 1998

The hydrographic data collected at three different times July, 1994, May, 1995 and June, 1996 around Taean peninsula in the mid-Yellow Sea off Korea, well known for the well-defined surface thermal fronts in summer, were analyzed. In the vertically well-mixed area where water depths varied from 15 m depth to 60 m depth, the temperature difference in the water column was less than $1^{\circ}C$. The temperature observed in the vertically well-mixed area was reversely related with the water depths and the coldest surface water was always observed over the deep channel with the depth of more than 50m, which developed southwestward off the promontory of Taean peninsula, irrespective of the observation period. The strengths of surface thermal front observed in June were much stronger than those in July, even though the surface temperature of stratified area were nearly the same as in July. These observed features could be explained as follows: A major physical process for the formation of the surface thermal front is the vertical mixing of water column but the detailed thermal structure in the study area depend on the physical parameters such as the water depth in the vertically well-mixed side and the vertical thermal structure in the stratified side.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.2 no.2
• /
• pp.117-124
• /
• 1997

Vertical profiles of dissolved Cu and Ni at the upper 400 m water layer have been determined at two stations in the central East Sea in October 1995. This is the first report on the vertical distribution of trace metals in Korea. Copper concentrations are in the range of 2.1~5.8 nmol/kg and 1.6~2.4 nmol/kg for stations S and N, respectively. The vertical profile of Cu at S is found a scavenging type (i.e., drastic decrease with increasing depth). Concentrations of Ni range from 4.3 to 7.1 nmol/kg and from 3.4 to 5.4 nmol/kg for stations Sand N, respectively. At station S, Ni is best correlated with phosphate, but not at stations N. Such difference between two stations are probably due to their different vertical distribution of water masses. Station S has a strongly stratified water column with 6 distinct water masses, but station N with a well-mixed subsurface water layer extending from 50 to 300 m depth. Extremely low salinity (31.87~31.96 psu) found at the surface water of station S was interpreted as a result of the Yangtze River effluents which were probably fed into the East Sea through the Korea Strait during the late summer. Such seasonal appearance of low salinity in southern part of the East Sea was reported previously. The concentrations of Cu and Ni at two sites are comparable to those reported in the North Pacific. It was found that Ni mostly exist as dissolved phase.

• Fire Science and Engineering
• /
• v.34 no.1
• /
• pp.47-54
• /
• 2020

This paper proposes a solution to the problems of constructing and installing sway braces for existing standpipes in narrow spaces and pits. The study develops a floor-fixed sway brace for a narrow space that can support the ground area under horizontal seismic loads (X-axis, Y-axis) as well as vertical seismic loads (Z-axis). The results of structural analysis using SolidWorks simulation showed that the eccentric load was generated in the first design according to the anchored position along the vertical direction, and the problem of exceeding the allowable stress of the material along the horizontal and vertical directions. In the second design model, deformation caused by the eccentric load along the vertical direction, similar to the first design model, did not occur. The maximum strain rate was 0.17%, which is approximately 12.84% less than the first design model (Maximum strain rate of 13.01%). It was confirmed that the structural stability and durability improved. Compressive and tensile load testing of the prototypes showed that all of them meet the performance criteria of the standard.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.3 no.3
• /
• pp.142-148
• /
• 1998

Environmental baseline information is necessary in order to assess the potential environmental impact of future manganese-nodule mining on the deep-seabed ecosystem. Total ATP (T-ATP), dissolved ATP (D-ATP) and particulate ATP (P-ATP) were measured to estimate total microbial biomass and to elucidate their vertical distribution patterns in the seabed of KODOS (Korea Deep Ocean Study) area, northeast equatorial Pacific Ocean. Within the upper 6 cm depth of sediment, the concentrations of T-ATP, D-ATP and P-ATP ranged from 4.4 to 40.6, from 0.6 to 16.1, and from 3.0 to 29.2 ng/g dry sediment, respectively. Approximately 84% of T-ATP, 81% of D-ATP, and 74% of P-ATP were present within the topmost 2 cm depth of sediment, and the distributions of ATP were well correlated with water content in the sediment. These results indicate that the distribution of total microbial biomass was largely determined by the supply of organic matter from surface water column. Fine-scale vertical variations of ATP were detected within 1-cm thick veneer of the sediment samples collected by multiple corer, while no apparent vertical changes were observed in the box-cored samples. It is evident that the box-core samples were disturbed extensively during sampling, which suggests that the multiple corer is a more appropriate sampling gear for measuring fine-scale vertical distribution pattern of ATP within thin sediment veneer. Overall results suggest that the concentrations of ATP, given their clear changes in vertical distribution pattern within 6 cm depth of sediment, are a suitable environmental baseline parameter in evaluating the variations of benthic microbial biomass that are likely to be caused by deep-seabed mining operation.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.3
• /
• pp.221-230
• /
• 2001

This study was performed to evaluate hard tissue cephalometric norms for Korean adults which can be implemented in surgical orthodontic treatment planning using selected horizontal reference plane especially for Koreans (Male: $SN-7.5^{\circ}$, Female: $SN-9.0^{\circ}$) and a simplified analytical method. 70 males and 70 females consisting of freshmen of Yonsei University from 1996 to 1997 and students from the Dental College of Yonsei University were chosen according to clinical examination and cephalometric analysis. The samples had normal profiles, normal anteroposterior skeletal relationship(ANB angle of $0^{\circ}$ to $4^{\circ}$ and Wits appraisal of -4.0mm to 0mm), and Class I molar and canine relationship. They had no missing or supernumerary teeth and had no experience of orthodontic or prosthetic treatment. After the selection of 23 landmarks and the construction of horizontal and vertical reference lines, 22 skeletal and 12 dental measurements were taken. These consisted of vertical and horizontal linear measurements and angular measurements. The results were as follows. 1. Mean and standard deviation of the measurements were calculated for males and females. 2. Most of the skeletal vertical measurements, and maxillary and mandibular length were bigger in males than females. Whereas anterior facial height ratio(N-ANS/ANS-Me) as well as maxillary and mandibular antero-posterior position in relation to the vertical reference line(N-perpendicular) showed no signigicant difference between sexes. 3. Maxillary and mandibular dental antero-posterior position in relation to the vertical reference line(N-perpendicular) showed no significant difference between sexes. 4. The upper incisor show(U1-Stms) was $2.1{\pm}1.7mm$ in males and $3.3{\pm}1.7mm$ in females. In this study, hard tissue cephalometric norms of Korean adults for orthognathic surgery were obtained.

• Journal of KIISE:Information Networking
• /
• v.32 no.1
• /
• pp.20-28
• /
• 2005

TCP(Transmission Control Protocol) is one of the most important Internet protocols, which is widely used in wireless networks as well as wired networks. However, when TCP is deployed for wireless networks, it takes severe performance degradation because TCP was designed for wired network. To overcome this drawback, a number of TCP variants have been proposed in the literature. However, most previous schemes did not consider TCP enhancement over heterogeneous networks. In heterogeneous networks, an mobile node (MN) may move from one access network to another(i.e., vertical handover). In the case of vertical handover, an MN experiences a TCP performance degradation caused by the packet loss and the sudden change of link characteristics between two different access networks. In this work, we investigate the TCP performance degradation occurred in vortical handover across heterogeneous networks. First, we have conducted the measurement study over GPRS-WLAN testbed. In the measurement study. we observed the TCP performance degradation in the case of handover from WLAN to GPRS. In order to study more different TCP behaviors during vertical handover, we performed comprehensive simulations using a network simulator 2(ns-2). Based on measurement and simulation results, we investigated how to improve TCP performance in vertical handover and we concluded that the existing mechanisms cannot be perfect solutions and new mechanisms are strongly required.