• Journal of Korean Society of Transportation
• /
• v.28 no.5
• /
• pp.141-153
• /
• 2010

The study is about the development of operating speed prediction models aimed for an evaluation of design consistency of four lane rural roads. The main differences of this study relative to previous research are the method of data collection and classification of road alignments. The previous studies collected speed data at several points in the horizontal curve and approaching tangent. This method of collection is based on the assumption that acceleration and deceleration only occurs at horizontal tangents and the speed is kept constant at horizontal curves. However, this assumption leads to an unreliable speed estimation, so drivers' behavior is not well represented. Contrary to the previous approach, speed data were collected with one and data analysis using a speed profile is made for data selection before building final models. A total of six speed prediction models were made according to the combination of horizontal and vertical alignments. The study predicts that the speed data analysis and selection for model building employed in this study can improve the prediction accuracy of models and be useful to analyze drivers' speed behavior in a more detailed way. Furthermore, it is expected that the operating speed prediction models can help complement the current design-speed-based guidelines, so more benefits to drivers as real road users, rather than engineers or decision makers, can be achieved.

• Journal of Korean Society on Water Environment
• /
• v.34 no.4
• /
• pp.363-374
• /
• 2018

The Han River serves as an important water resource for the city of Seoul, Korea and in the neighboring metropolitan areas. From the Paldang dam to the Jamsil submerged weir, the 4 water intake stations that are located for the Seoul metropolitan population were under review in this study. Therefore the water quality management in this section is very important to monitor, analyze and review to rule out any safety concerns. In this study, a 3-D hydrodynamic model, EFDC (Environmental Fluid Dynamics Code), was applied to the downstream of the Paldang Dam in the Han River, which is about 23 km in length, to determine issues related to water resource management. The 3-D grid was composed of 2,168 horizontal grids and three vertical layers. In this case, the hydrodynamic model was calibrated and verified with an observed average daily water surface elevation, water temperature and flow rate data for 3 years (2013~2015). The developed EFDC model proved to reproduce the hydrodynamics of the Han River well. The composition ratios of the noted incoming flows at the monitored intake stations for 3 years and their flow patterns in the river were analyzed using the validated model. It was found that the flow of the Wangsuk Stream depended on the Paldnag dam discharge, and it was noted that the composition ratios of the stream at the intake stations changed accordingly. In a word, the Wangsuk Stream moved mainly along the right bank of the Han River under the condition of a normal dam flow. As can be seen, when the dam discharge rate was low, the incidence of lateral mixing was often seen. The scenario analyses were also conducted to predict the transport of conservative pollutants as in the case of a chemical spill accident. Generally speaking, when scenarios were applied, the arrival time and concentration of pollutants at each intake station was thus predicted.

• 한국해양학회지
• /
• v.29 no.2
• /
• pp.171-182
• /
• 1994

Dissolved free amino acid (DFAA) dissolved hydrolyzable amino acid (DHAA) and D/L amino acid racemic ratio in the dissolved organic compounds were studied to investigate the biogeochemical characteristics of dissolved organic compound in the Yellow Sea. Concentration of total DFAA ranged from 0.06 uM to 0.26 uM in the study area. DFAA composition showed that aspiratae, glutamate, serine, glycine and alanine were predominant. According to characteristics of functional group of amino acid, these belonged to hydroponic group. C-18 short column cartridge (Sep-Pak) activated by methanol was used to extract organic macromolecules in the seawater. In operational scheme, macromolecules were divided into two fractions. Geomacromolecule fraction eluted with 50% methanol was used to extract organic macromolecules in the seawater. In operational scheme, macromolecules were divided into two fractions. Geomacromolecule fraction eluted with 50% methanol was moderately hydrophilic and showed characteristics of humic substance in the seawater. Biomacromolecule fraction eluted with 100% methanol was hydrophobic and most abundant in the surface seawater samples. DHAA was much higher than DFAA in this study area. DHAA ranged from 2.05 uM to 6.19 uM in the B-fraction and from 8.13 uM to 24.46 uM in the G-fraction. DHAA was higher in the surface water than in the bottom water where the vertical stratification developed well. The result of HPLC analysis of D/L amino acid showed that low racemic ratio was found in the B-fraction. It implies that the B-fraction is relatively younger than the G-fraction and freshly derived from biosphere.

• Journal of fish pathology
• /
• v.31 no.1
• /
• pp.9-13
• /
• 2018

We previously monitored nervous necrosis virus (NNV) in brain samples of artificially produced walleye Pollock (Gadus chalcogrammus) seedlings, with a low prevalence (1.8%, 1/55) but no clinical symptoms. Given that this virus is considered one of the most serious viral threats for almost all marine aquaculture fish species and characterized by both vertical and horizontal transmission, it would be interesting to monitor NNV in the fertilized eggs as well. We collected fertilized walleye pollock eggs from the farms located in Goseong during January to March, 2017. Approximately 50 mg of eggs were periodically taken from 4 each different batches, and 37 different pooled sample sets in total were made during sampling period. RNA was extracted from the eggs by using Trizol and cDNA was synthesized for RT-PCR for detecting NNV. Primers and PCR conditions are the same as previously described. As a result, NNV was not detected from any of the sample sets by one step PCR (0%, 0/37), suggesting NNV may not be a threat in walleye pollock aquaculture in Korea at present time. However, continuous monitoring for NNV should be conducted because introducing a new species into aquaculture industry involves potentials of disease outbreak and NNV is already known to cause outbreaks in gadoid fishes.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.1
• /
• pp.99-108
• /
• 2012

To consider geomorphological and geological characteristics to Gatbawi(the 500th natural monument), it was investigated with the aspect of scale, form, mineralogy, chemistry and weathered state. Showing typically erosional features, micro-terrains as sea cliffs, sea notches, marine plateaus and tafoni developed well on coastal areas near the monument. Sea cliffs are vertical and form sea notches in their bases. Coastal terraces are 3.5m in width and 20m in trace. Tafoni are honey combed. The monument is mainly composed of quartz, plagioclase, microcline, biotite, sericite in mineral and corresponded to crystalline tuff dominated in quartz and plagioclase. It has 23.60~28.27 wt.% of $Al_2O_3$, 3.27~5.80 wt.% of $Na_2O$, and 0.11~0.20 wt.% of Cl in chemical contents, leveling higher than those of earth crust standards. It is considerably weathered on the basis of CAI(77.42~83.93%). The monument is very useful for natural perspective tourism and education. Therefore, it is necessary that several ideas as guide plates, observing telescope, explaining guider, education programs connected with related services, touring goods, picture for books on utilization on the monument must establish.

• Geophysics and Geophysical Exploration
• /
• v.1 no.1
• /
• pp.57-63
• /
• 1998

The electrical resistivity method, one of old and widely used geophysical prospecting methods, has extended its scope to civil & environmental engineering areas. The electrical resistivity imaging technique was performed at the waste disposal site located in Junju to verify the applicability to the environmental engineering area. The dipole-dipole array, with the dipole spacing of 10 m, was applied along eight survey lines. The field data were obtained under the control of automatic acquisition softwares and topographic effects were corrected during processing stage. The processed resistivity images show that very low resistivity develops inside the disposal site and the distribution of low resistivity is exactly in accord with the boundary of the site except the river side. The depth of low resistivity zones is deeper toward the river side, which is interpreted that there is a high possibility for contaminants to be scattered to the river. From resistivity images, it was feasible to deduce the depth of waste disposal as well as the horizontal/vertical distribution of the contaminated zone, which proved the applicability of the electrical resistivity imaging technique to the environmental engineering area.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_1
• /
• pp.1013-1027
• /
• 2021

Images taken with KOMPSAT-3 have additional NIR and PAN bands, as well as RGB regions of the visible ray band, compared to imagestaken with a standard camera. Furthermore, electrical and optical properties must be considered because a wide radius area of approximately 17 km or more is photographed at an altitude of 685 km above the ground. In other words, the camera sensor of KOMPSAT-3 is distorted by each CCD pixel, characteristics of each band,sensitivity and time-dependent change, CCD geometry. In order to solve the distortion, correction of the sensors is essential. In this paper, we propose a method for detecting uniform regions in side-slider-based KOMPSAT-3 images using segment-based noise analysis. After detecting a uniform area with the corresponding algorithm, a correction table was created for each sensor to apply the non-uniformity correction algorithm, and satellite image correction was performed using the created correction table. As a result, the proposed method reduced the distortion of the satellite image,such as vertical noise, compared to the conventional method. The relative radiation accuracy index, which is an index based on mean square error (RA) and an index based on absolute error (RE), wasfound to have a comparative advantage of 0.3 percent and 0.15 percent, respectively, over the conventional method.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.6
• /
• pp.457-467
• /
• 2018

Currently, the regulation and rules for public surveying and the UCPs (Unified Control Points) adapts those of the triangulated traverse surveying. In addition, such regulations do not take account of the unique characteristics of GNSS (Global Navigation Satellite System) surveying, thus there are difficulties in field work and data processing afterwards. A detailed procesure of GNSS processing has not yet been described either, and the verification of accuracy does not follow the generic standards. In order to propose an appropriate procedure for field surveys, we processed a short session (30 minutes) based on the scenarios similar to actual situations. The reference network in Seoul was used to process the same data span for 3 days. The temporal variation during the day was evaluated as well. We analyzed the accuracy of the estimated coordinates depending on the parameterization of tropospheric delay, which was compared with the 24-hr static processing results. Estimating the tropospheric delay is advantageous for the accuracy and stability of the coordinates, resulting in about 5 mm and 10 mm of RMSE (Root Mean Squared Error) for horizontal and vertical components, respectively. Based on the test results, we propose a procedure to estimate the daily solution and then combine them to estimate the final solution by applying the minimum constraints (no-net-translation condition). It is necessary to develop a web-based processing system using a high-end softwares. Additionally, it is also required to standardize the ID of the public control points and the UCPs for the automatic GNSS processing.

• Tunnel and Underground Space
• /
• v.28 no.6
• /
• pp.584-595
• /
• 2018

This study conducted direct shear test on about 290 sorts of materials such as sandy soil, clayey soil and gravely soil to present proper standard on shear strength of soil. Shear strength of soil in large scale tends to show that angle of internal friction increases as sand contents grow and it ranges $23.5^{\circ}{\sim}34.9^{\circ}C$ with cohesion of 2.0 kPa~15.7 kPa. Elastic modulus was visibly distinct by load, and which increased approximately 80% as vertical load grows. Angle of internal friction arranging $15.0^{\circ}{\sim}28.6^{\circ}$ on clayey soil decreased as clay contents rises and cohesion increase in regular scale. Elastic modulus tends to increase initial elastic modulus with almost same growing rate. While angle of internal friction on gravely soil indicates $29.9^{\circ}{\sim}36.7^{\circ}$ which hardly shows distinctive features. According to test in detail, cohesion of SW (well-graded sand), SP (poorly-graded sand), SC (clayey sand) and SM (silty sand) indicates value by 94%, 78% and 59% comparing to SC, SW and SP respectively. Angle of internal friction of ML (low-liquid limit silt) and CL (low-liquid limit clay) appears almost same features, and MH (high-liquid limit silt) despite of 88% value of ML. Cohesion among them varies with similar growing rate.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.4
• /
• pp.468-475
• /
• 2019

An end-line flame arrester allows free venting in combination with flame protection for vertical vent applications. End-line flame arresters are employed in various fields, especially in shipping. In flame arresters, springs are essential parts because the spring load and the spring's elasticity determine the hood opening moment. In addition, the spring has to work under a high-temperature condition because of the burning gas flame. Therefore, it is necessary to analyze the mechanical load and elasticity of the spring when the flame starts to appear. Based on simulations of the working process of a specific end-line flame arrester, a thermal and structural analysis of the spring is performed. A three-dimensional model of a burned spring is built using computational fluid dynamics (CFD) simulation. Results of the CFD analysis are input into a finite element method simulation to analyze the spring structure. The research team focused on three cases of spring loads: 43, 93, and 56 kg, correspondingly, at 150 mm of spring deflection. Consequently, the spring load was reduced by 10 kg after 5 min under a $1,000^{\circ}C$ heat condition. The simulation results can be used to predict and estimate the spring's load and elasticity at the burning time variation. Moreover, the obtained outcome can provide the industry with references to optimize the design of the spring as well as that of the flame arrester.