• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.133-144
• /
• 2009

Incheon Bridge, 18.4 km long sea-crossing bridge, will be opened to the traffic in October 2009 and this will be the new landmark of the gearing up north-east Asia as well as the largest & longest bridge of Korea. Incheon Bridge is the integrated set of several special featured bridges including a magnificent cable-stayed girder bridge which has a main span of 800 m width to cross the navigation channel in and out of the Port of Incheon. Incheon Bridge is making an epoch of long-span bridge designs thanks to the fully application of the AASHTO LRFD (load & resistance factor design) to both the superstructures and the substructures. A state-of-the-art of the geotechnologies which were applied to the Incheon Bridge construction project is introduced. The most Large-diameter drilled shafts were penetrated into the bedrock to support the colossal superstructures. The bearing capacity and deformational characteristics of the foundations were verified through the world's largest static pile load test. 8 full-scale pilot piles were tested in both offshore site and onshore area prior to the commencement of constructions. Compressible load beyond 30,000 tonf pressed a single 3 m diameter foundation pile by means of bi-directional loading method including the Osterberg cell techniques. Detailed site investigation to characterize the subsurface properties had been carried out. Geotextile tubes, tied sheet pile walls, and trestles were utilized to overcome the very large tidal difference between ebb and flow at the foreshore site. 44 circular-cell type dolphins surround the piers near the navigation channel to protect the bridge against the collision with aberrant vessels. Each dolphin structure consists of the flat sheet piled wall and infilled aggregates to absorb the collision impact. Geo-centrifugal tests were performed to evaluate the behavior of the dolphin in the seabed and to verify the numerical model for the design. Rip-rap embankments on the seabed are expected to prevent the scouring of the foundation. Prefabricated vertical drains, sand compaction piles, deep cement mixings, horizontal natural-fiber drains, and other subsidiary methods were used to improve the soft ground for the site of abutments, toll plazas, and access roads. Light-weight backfill using EPS blocks helps to reduce the earth pressure behind the abutment on the soft ground. Some kinds of reinforced earth like as MSE using geosynthetics were utilized for the ring wall of the abutment. Soil steel bridges made of corrugated steel plates and engineered backfills were constructed for the open-cut tunnel and the culvert. Diverse experiences of advanced designs and constructions from the Incheon Bridge project have been propagated by relevant engineers and it is strongly expected that significant achievements in geotechnical engineering through this project will contribute to the national development of the longspan bridge technologies remarkably.

• Journal of Ginseng Research
• /
• 제33권2호
• /
• pp.127-131
• /
• 2009

시판되고 있는 인삼재배용 미생물제제에 대하여 인삼묘 입고병억제효과를 유묘포트시험으로 검정하였다. Rhizoctonia solani에 대하여는 리조렉스 (tolclofos-methyl)와 바리문 (validamycin-A)을 비교하여 검정하고 Pythium에는 리도밀 (metalaxyl)을 비교하였다. 리조렉스와 비교한 시험에서만 처리간 평균보호율 (Pm)의 차이에 유의성이 있었다. 최고효과를 보이는 미생물제 C-ISR2 Rhizoctonia solani에 대한 두 개의 시험에서 순보호율 (net Pm-total Pm-control Pm)이 33%와 33.6%였다. 대조구의 Pm이 58.6%인 경우 총보호율이 91.6%로, 환경조건이 좋은 포장에서는 미생물제로만 보호가 가능함을 나타낸다. C-ISR2의 Pythium에 대한 순 Pm은 26.4%였다. 한 병원균에 대한 미생물제의 순보호율은 일정한 것으로 보였다. Pm과 CV간에는 세 번 다 부의 직선상관관계를 부였다. 이는 미생물제나 화학약제가 모두 보호체계가 같으며 미생물제제가 미세환경에 예민하여 변이가 커지는 것으로 보인다. 미생물제와 대조구의 Pm과 CV의 상관식에서 CV=0에서의 절편 값은 미생물제의 이론적 최대보호율이 된다. 기본 발병환경의 개선 (무처리구의 보호율증대)에 따라 기존 미생물제제로 화학농약을 대체할 수 있다.

• 치과방사선
• /
• 제28권1호
• /
• pp.27-36
• /
• 1998

The purpose of this study was to obtain information on the clinical and radiographic features of the fibro-osseous lesions in the jaws. For this study, the author examined and analysed the clinical records and radiographs of 71 cases of 68 patients in fibrous dysplasia, 35 cases of ossifying fibroma and 30 cases of 16 patients of periapical cemental dysplasia diagnosed by clinical and radiographic or histopathological examinations. The obtained results were as followings: L Fibrous dysplasia occurred most frequently in the 2nd decade (30.0％), ossifying fibroma in the 3rd-4th decades, periapical cemental dysplasia in the 4th decade, and all of three lesions showed slight predilection in females. In most cases, chief complaints were painless facial swelling in fibrous dysplasia and ossifying fibroma, and periapical cemental dysplasia was found accidentally in radiographs. 2. Fibrous dysplasia was occurred more frequently in maxilla, ossifying fibroma in mandible and both lesions in premolar-molar area. Periapical cemental dysplasia was occurred most frequently in the mandibular anterior area. The size of fibrous dysplasia was larger than that of ossifying fibroma, and the shape of ossifying fibroma was more round and elliptical than fibrous dysplasia whose was fusiform. 3. Fibrous dysplasia was shown homogeneous radiopaque shadow of 57.6％ and ossifying fibroma & periapical cemental dysplasia were shown mixed appearance of radiolucency and radiopacity shadows at 74.2％, 60.0％, respectively. 4. Fibrous dysplasia was entirely shown poorly defined at 87.7％, but ossifying fibroma & periapical cemental dysplasia were shown well outlined at 60.0％, 70.0％, respectively. 5. Cortical thinning and expansion were observed in fibrous dysplasia and ossifying fibroma, and severe in ossifying fibroma than fibrous dysplasia, and those signs were not seen in periapical cemental dysplasia. Loss of lamina dura was dominant in fibrous dysplasia and root resorption was dominant in ossifying fibroma. Displacement of mandibular canal and the degree of the increase of vertical dimension were alike in both lesions. Displacement of maxillary sinus or nasal cavity, thinning & expansion of the maxillary sinus were dominant in fibrous dysplasia. 6. Polyostotic fibrous dysplasia was occurred at 5.9％, Multiple periapical cemental dysplasia at 43.7％. Occurrence rate in the edentulous area of fibrous dysplasia and ossifying fibroma were 7.0％, 8.6％, respectively.

• Journal of Periodontal and Implant Science
• /
• 제36권2호
• /
• pp.273-288
• /
• 2006

The purpose of this study was to evaluate exophytically vertical bone formation in rabbit calvaria by the concept of guided bone regeneration with a custom-made porous titanium membrane combined with bone graft materials. For this purpose, a total of 12 rabbits were used, and decorticated calvaria were created with round carbide bur to promote bleeding and blood clot formation in the wound area. Porous titanium membranes (0.5 mm in pore diameter, 10 mm in one side, 2 mm in inner height) were placed on the decorticated calvaria, fixed with metal pins and covered with full-thickness flap. Experimental group I was treated as titanium membrane only. Experimental group II, III, IV was treated as titanium membrane with BBM, titanium membrane with DFDB and titanium membrane with FDB. The animals were sacrificed at 8 and 12 weeks after surgery, and new bone formation was assessed by histomorphometric as well as statistical analysis. 1. Porous titanium membrane was biocompatable and capable of maintaining the regeneration space. 2. At 8 and 12 weeks, all groups demonstrated exophytic bone formation and there was a statistical significant difference among different groups only at 12 weeks. 3. The DFDB group revealed the most new bone formation compared to other groups (p<0.05). 4. At 12 weeks, DFDB and FDB groups showed the most significant resorption of graft materials (p<0.05). 5. The BBM was not resorbed at all until 12 weeks. 6. The fixation metal pin revealed excellent effect in peripheral sealing. On the basis of these findings, we conclude that a porous titanium membrane may be used as an augmentation membrane for guided bone regeneration, and DFDB as an effective bone forming graft material. The fixation of the membrane with pin will be helpful in GBR technique. However, further study is required to examine their efficacy in the intraoral experiments.

• Journal of Periodontal and Implant Science
• /
• 제37권4호
• /
• pp.791-803
• /
• 2007

The purpose of this study was to evaluate exophytically vertical bone formation in residual ridge of the beagle dog by the concept of guided bone regeneration with a titanium reinforced e-PTFE membrane combined with irradiated cancellous human bone. Twelve male beagle dogs(mean age 1.5 years and mean weight 12kg) were used for this study. The alveolar ridges after extraction of all mandibular premolars were surgically and horizontally removed. At 8 weeks after extractions, full-thickness flap was reflected and cortical bone was removed with round bur and copious irrigation. Rectangular parallelepiped(10mm in length, 5mm in width, and 4mm in height) bended with titanium-reinforced e-PTFE(TR e-PTFE) membrane was placed on the decorticated alveolar ridge, fixed with metal pins and covered with full-thickness flap and assigned as a control group. Test groups ere treated with TR e-PTFE membrane filled with irradiated cancellous human bone. Of twelve beagle dogs, four control dogs and four test dogs without membrane exposure to oral cavity were sacrificed at 8 and 16 weeks respectively. The surgical sites were dissected out, fixed in 4% buffered formaldehyde, dyed using a Villanueva staining technique, and processed for embedding in plastic resin. The cutting and grinding methods were routinely processed for histologic and histomophometric analyis of exophytic bone formation as well as statistical analysis. The results of this study were as follows: 1. Exophytic bone formation in the both of experimental groups was increased respectively after surgery from 23.40% at 8 weeks to 46.26% at 16 weeks in the control groups, from 40.23% at 8 weeks to 47.11% at 16 weeks in the test groups(p<0.05). 2. At 8 weeks after surgery, exophytic bone formation was made 40.23% in the test groups and 33.40% in the control groups. Exophytic bone formation was significantly made in the test group more than in the control group. At 16 weeks after surgery, exophytic bone formation was made 44.11% in the test groups and 46.26% in the control groups. Exophytic bone formation was made in the test groups more than in the control groups, but there was no statistically significant differences. 3. The membrane was fixed with metal pins to closely contact it to the bone surface. So, collapse and deviation of the membrane could be prevented and in growth of connective tissue also could be blocked from the periphery of the membrane. On the basis of these findings, wee suggest that intraoral experimental model for exophytic bone formation may be effective to evaluate the effect of bone graft material. And it indicates that combined use of membrane and ICB graft material is more effective than use of membrane only for exophytic bone formation.

• 구강회복응용과학지
• /
• 제16권2호
• /
• pp.133-147
• /
• 2000

A well-planned, precise occlusal adjustment of natural teeth has some distinct advantages over other forms of occlusal therapy. It should be emphasized, however, that an occlusal adjustment is an irreversible procedure and has definite contraindications in some mouths. Generally, the treatment methods for the patients that has open-bite will be following as below. : (1) Use of removable orthopedic repositioning appliance, (2) Orthodontics, (3) Full or partial reconstruction of the dentition, (4) Orthognathic surgical procedure, (5) Occlusal adjustment of the existing natural teeth, (6) Any combination of the above. Above all, the advantages of occlusal adjustment of natural teeth are : (1) the patient is more able to adapt to the changes in jaw position and posture; (2) the phonetic or speaking ability of the patient is not significantly changed and usually is improved; (3) the esthetics of the natural teeth is not altered and often is better; (4) the hygiene of the individual teeth is easily maintained; and (5) the functional usage of the teeth as cutting and chewing devices is markedly improved. The objective of an occlusal adjustment, as with any form of occlusal therapy, is to correct or remove the occlusal interferences, or premature contacts, on the occluding parts of the teeth which prevent a centric relation closure of the mandible. A systematic, disciplined approach can be followed in treatment, the objectives should be listed. They are : (1) Centric relation occlusion of the posterior teeth. (2) Proper "coupling" of the anterior teeth. (3) An acceptable disclusive angle of the anterior teeth in harmony with the condylar movement patterns. (4) Stability of the corrected occlusion. (5) Resolution of the related symptoms. For the patient with open-bite on anterior and posterior teeth, this case report shows the treatment methods in combination the fixed prosthesis with the selective cutting of the natural teeth. Occlusal adjustment is no longer an elective procedure but a mandatory one for patients requiring restorations and those in treatment for TMD dysfunctions or those whose dentitions show signs of occlusal trauma. Occlusal adjustment is essential for all who do not display the above lists.

• 한국태양에너지학회 논문집
• /
• 제35권2호
• /
• pp.73-83
• /
• 2015

When it comes to these buildings for business use, cooling load during summertime was reported to have great importance which, as a result, impressively increased interest in Solar Heat Gain Coefficient (SHGC). Such SHGC is considered to be lowered with the help of colors and functions of glass itself, internal shading devices, insulation films and others but basically, these external shading devices for initial blocking that would not allow solar heat to come in from outside the buildings are determined to be most effective. Of many different external shading devices, this thesis conducted an analysis on Exterior Venetian Blind. As for vertical shading devices, previous researches already calculated SHGC conveniently using concepts of sky-opening ratios. However in terms of the Venetian Blind, such correlation is not possibly applied. In light of that, in order to extract a valid correlation, this study first introduced a concept called shape factor, which would use the breadth and a space of a shade, before carrying out the analysis. As a consequence, the concept helped this study to find a very similar correlation. Results of the analysis are summarized as follows. (1) Regarding SHGC depending on the surface reflectance of a shade, an average of 2% error is observed and yet, the figure can always be ignored when it comes to a simple calculation. (2) As for SHGC of each bearing, this study noticed deviations of 4% or less and in the end, it is confirmed that extraction can be achieved with no more than one correlation formula. (3) When only the shape factor and nothing else is used for finding a correlation formula, the formula with a deviation of approximately 5% or less is what one would expect. (4) Since the study observed slight differences in bearings depending on ranges of the shape factors, it needed to extract a weighted value of each bearing, and learned that the smaller the shape factor, the wider the range of a weighted value. The study now suggests that a follow-up research to extract a simple calculation formula by dealing with all these various inclined angles of shade, solar radiation conditions of each region (the ratio of diffuse radiation to direct radiation and others) as well as seasonal features should be carried out.

• 한국제4기학회지
• /
• 제17권1호
• /
• pp.27-37
• /
• 2003

한반도 동해 중부 해안에 위치한 강원도 고성군 문암리 신석기 유적지의 퇴적층의 퇴적환경은 퇴적물의 입도 특성과 광물 조성에 의하여 세 개의 퇴적층서 단위(Unit)로 구분되었다. 최하위 퇴적 층서 단위인 Uint 3은 하부의 사질층(S)과 상부의 니사질층(mS)으로 세분된다. 이 퇴적층은 해안 사구 모래가 퇴적된 후, 토양화 과정에 의해 소량의 니질(mud)을 함유하는 것으로 해석된다. Unit 3을 피복하는 Unit 2는 신석기 유물이 출토되며, 사층리 구조를 보이는 퇴적층으로 다시 하부의 니사질층(mS)과 상부의 사질층(S)으로 구분된다. 전체적으로 Unit 2 퇴적층은 해빈으로부터 바람에 의해 운반ㆍ퇴적된 전형적인 해안 사구(coastal dune) 퇴적층으로 해석된다. 최상위 퇴적층서 단위인 Unit 1은 역사질층(gS)으로 잔자갈이 함유되어 하부의 퇴적층보다 조립하며, 분급도 불량하다. 이 퇴적층은 해안사구 층으로 현재의 지표 유수와 식물의 영향을 받아 토양화 과정을 나타내는 것으로 해석된다. 이 문암리 유적지 사구층의 형성 연대는 기존의 해수면 변동 연구와 신석기 유물의 연대 분석 결과로 미루어 보아 현세 중기(middle Holocene, 약 7,800∼6,500 yr BP) 전후인 것으로 해석된다.

• 한국지역지리학회지
• /
• 제7권2호
• /
• pp.17-34
• /
• 2001

본 연구는 울산시를 사례로 IMF 체제를 극복하는 과정에서의 기업의 재구조화 전략을 중심으로 우리나라 중화학공업의 재구조화 특성을 분석하였다. 울산 지역경제는 중화학부문의 대기업 분공장과 그 관련기업의 비중이 절대적이고, 특정 대기업과 중소기업간 수직적 하청관계에 기초한 대기업 주도의 산업구조로 특징 지워진다. IMF 체제를 계기로 시장 재구조화는 종래 가격경쟁에서 품질경쟁으로의 전환을 기조로 시장 확대, 판매처의 다양화 그리고 수출 확대 전략을 중심으로 생산제품 및 시장 다변화, 수출과 내수시장의 점유비율의 조정 등 다양한 전략으로 수요환경 변화에 대응하고 있다. 생산체계가 변화된 기업체는 절반에 미치지 않으나, 주로 소품종 소량생산체계에서 소품종 대량생산체계 혹은 다품종 대량생산에서 전문화와 규모경제를 동시에 추구하는 소품종 대량생산 체제로 전환하였다. 그리고 생산조직에 있어서는 특히 전문하청의 확대로 핵심기능만을 내부화하고 나머지는 외부화하여 비용절감과 수요변화에 신축적으로 대처하기 위한 전략을 추구하였다. 노동 재구조화에 있어서는 팀제도입, 육체적 정신적 노동의 결합과 소사장제 도입으로 생산현장의 의견을 의사결정에 반영할 수 있고, 다기능화와 노동혼합을 통한 노동조직상의 유연성을 제고하려는 전략을 채택하였다.

• 한국해안해양공학회지
• /
• 제6권4호
• /
• pp.413-420
• /
• 1994

하천수 플룸(plume)의 퍼짐을 다루는 역학은 플룸의 경계면이 시간과 공간에 따라서 변하기 때문에 자유경계조건의 문제(free boundary problem)로 다루어야 하는 대단히 복잡한 비선형 문제이다. 더욱이 플룸경계를 통한 주변수의 혼합까지 고려할 경우 그 복잡성은 한층 더해진다. 이러한 비선형성과 복잡성을 피하는 기법의 하나가 적분해석법인 바, 본 논문에서는 하천수 플룸의 흐름축에 수직한 횡방향 및 수심방향에 대하여 기본방정식들을 적분함으로 3차원 문제를 1차원 문제로 치환하는 적분해석법을 사용하였다. 다만 이 일이 가능하기 위해서는 유동변수들(유속, 밀도 등)의 횡방향 및 수심방향의 분포함수가 알려져 있음이 전제되어야 하는데 유속의 축방향성분 및 플룸과 주변수 간의 밀도차가 상기 두 방향에 대해서 가우스(Gauss)분포를 갖는다는 잘 검증된 가정을 활용하였다. 그리고 이 가정에서 플룸의 횡방향 유속을 도출해낸 본 연구자들의 기발표된 논문의 결과도 활용하였다. 결과로 얻어진 연행(entrainment)효과까지 포함한 방정식들을 Runge-Kutta 수치해석법을 사용하여 풀었다. 그리하여 하천수 풀룸의 3차원적 해석을 쉽게 수행할 수 있는 수치해석기법을 얻어냈다.