• Science of Emotion and Sensibility
• /
• v.24 no.2
• /
• pp.49-56
• /
• 2021

In this study, we investigated the necessary mechanical properties of conductive multifilament yarns for fabricating the electrodes of biosignal measurement pressure and stretch textile sensors using embroidery. When electrodes and circuits for smart wearable products are produced through the embroidery process using conductive multifilament yarns, unnecessary material loss is minimized, and complex electrode shapes or circuit designs can be produced without additional processes using a computer embroidering machine. However, because ordinary missionary threads cannot overcome the stress in the embroidery process and yarn cutting occurs, herein, we analyzed the S-S curve, thickness, and twist structure, which are three types of silver-coated multifilament yarns, and measured the stress in the thread of the embroidery simultaneously. Thus, the required mechanical properties of the yarns in the embroidery process were analyzed. In the actual sample production, cutting occurred in silver-coated multifilament rather than silver-coated polyamide/polyester, which showed the lowest S-S curve. In the embroidery process, the twist was unwound through repetitive vertical movement. Further, we fabricated a piezoresistive pressure/tension sensor to measure gauge factor, which is an index for measuring biological signals. We confirmed that the sensor can be applied to the fabrication of embroidery electrodes, which is an important process in the mass production of smart wearable products.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.6
• /
• pp.434-445
• /
• 2020

In this study, the minimization of harbor oscillation using permeable breakwater was applied to the actual harbor and investigated an effect of minimization by computer simulation in order to take into account the water quality problems and measures of harbor oscillation by infragravity waves at the same time. The study site is Mukho harbor located at East coast of Korea that harbor oscillation has been occurred frequently. The infragravity waves obtained by analyzing the observed field data for five years focused on the distribution between wave periods of 40 s and 70 s and wave heights in less than 0.1 m was 94% of analyzing data. The target wave periods was 68.0 s. The most effective method of minimization of harbor oscillation by infragravity waves was to install a detached permeable breakwater with transmission coefficient of 0.3 on the outside harbor and replace some area of the vertical wall in the harbor with wave energy dissipating structure to achieve a reflectivity of 0.9 or less. The amplitude reduction rate of this method shown in 27.4%. And the effect of the difference in transmission coefficient of permeable breakwater on the reduction rate of the amplitude was not significant.

• 동북아역사논총
• /
• no.60
• /
• pp.196-227
• /
• 2018

The issues of this study are as follows. First, I will examine the overall situation and transition trends of Tibetan research in Taiwan since the modern period, and examine the development and trends of Tibetan history research in Taiwan. Secondly, in order to satisfy the above, we will analyze trends of Taiwan's major Tibetan research institutes and scholars, and trace their trends and their trajectories. Third, the trend of Tibetan research in Taiwan may be a useful indicator for us to analyze research methods and trends of Taiwanese scholars. If there is a flow of features and transitions, the text will explore the reason. Fourth, one of the implications of this study is that it can trigger an understanding of locality in the structure of the central region, the Han Chinese minority, and the possession and distribution of academic reasoning. In other words, it should be noted that even though the same Tibetan research is conducted, China is in the position of the vested right to distribute 226 | 동북아역사논총 60호the central or ownership, while Taiwan has historical and territorial characteristics that deviate from such a gaze and attitude. Taiwan may be sensitive to the vertical concept understood as a change in the relationship between the state and the center, or whether it is applicable to Tibetan research. If there is such an academic climate, I would like to consider suggestions for us. This may provide a direction to view the academic issues of a few scholars, or even the domestic academic world as an independent object of more specific academic research.

• Korean Journal of Environmental Biology
• /
• v.38 no.4
• /
• pp.554-562
• /
• 2020

Tremex fuscicornis (Siricidae), known as the xylophagous horntail, and Leucospis japonica (Leucospidae), known as the parasitoid wasp, are wood-boring wasps belonging to the order Hymenoptera. These insects are interesting sources of biological inspiration for the development of drilling mechanisms. To study the biomimicry aspects, the morphological characters of the ovipositor of T. fuscicornis and L. japonica were analyzed using a stereoscopic microscope, a field emission scanning electron microscope, and an optical microscope. There were many differences in the ovipositors between the two species, such as shape, length, surface structure, and arrangement of the teeth. Evenly arranged teeth were developed at the tip of both the dorsal valve and the ventral valve of the ovipositor of T. fuscicornis and looked like a rotating drill bit. In contrast, in L. japonica, the teeth, which looked like a saw, were found only on the ventral valve. Moreover, the tip of the ovipositor of T. fuscicornis was symmetrically divided into four parts, while that of L. japonica was divided into three parts having a 2:1:1 ratio. However, in the case of T. fuscicornis, after the 14th tooth, four parts melded into three parts maintaining a 2:1:1 ratio, and a dovetail joint was found on the horizontal cross-section of the ovipositor that allowed vertical movement for making a hole. These morphological differences of the ovipositor may be due to the insects' lifestyles and phylogenetic distance. Finally, zinc was commonly found at the tip of the ovipositors of both species, a probable result of ecological adaptation created by drilling wood.

• Journal of agriculture & life science
• /
• v.53 no.4
• /
• pp.113-124
• /
• 2019

In this study, the operational characteristics of a cam-type vegetable transplanter which usually used in domestic was analyzed and operating mechanism of a transplanting device was analyzed. The main components and power path of the transplanter were analyzed. The maximum and minimum control cycles according to the moving speed and the plant spacing were analyzed. 3D modeling and simulation were performed to derive the trajectory of the bottom end of the transplanting hopper and the plant spacing at the each operating condition. The simulation results were verified by the field tests. As main findings of this study, the transplanting device has one degree of freedom (DOF) which consist of 13 links, 17 rotating joints and 1 half joint, and each part has composite structure with cam and links. By continuous and repetitive motion of the structures of transplanting device, the transplanting hopper plants the seedling in the ground with a vertical direction, and the seedling was planted stably. The power is transmitted to the driving part and transplanting device from the engine, and the maximum and minimum plant spacing of the transplanting device were about 900 mm and 350 mm, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.688-701
• /
• 2020

This study analyzes the characteristics and change factors of technological cooperation networks in the automotive industry. Using Social Network Analysis (SNA) of 112,009 autonomous driving-related patents filed from 2000 to 2017 by major automotive firms in the world, we investigate the structure of the technological cooperation network. Network characteristics such as density are analyzed through structural characteristic analysis among the network analysis indicators. The structural characteristics of the technology cooperation network are confirmed through analysis of status characteristic indicators, such as the degree of centrality, betweenness centrality, and closeness centrality. Results show that car makers such as Toyota and Hyundai Motors, as well as parts suppliers such as Bosch and Continental, have high-performance technology developments related to autonomous driving. The structural characteristics of the network show that companies participating in cooperative networks for autonomous driving technology development have increased in number and are diversified, and all of the status characteristics indicators have decreased. This can be interpreted as an increasing number of horizontal and complementary forms of technological cooperation between firms. In addition, it was confirmed that the number of participants in the field of autonomous driving technology has increased, and the networks have become more complex.

• Korean Journal of Optics and Photonics
• /
• v.33 no.2
• /
• pp.67-73
• /
• 2022

In a head-mounted display (HMD) for virtual-reality applications, a narrow viewing angle is preferred to the usual, wide viewing angle because the HMD is positioned close in front of the user's eyes, and the display position is fixed. In this paper, we propose a new back-light unit (BLU) for implementing a narrow viewing angle, which is suitable for a HMD. By optimizing the scattering patterns in the light-guide-plate and inverse-prism structures, the viewing angle and correlations between structural parameters in the BLU components are analyzed with ray-tracing simulations. As a result, a double-angle inverse-prism structure incorporating the scattering patterns of a light-guide plate is chosen, which results in a 14% increase in center luminance, a 16% decrease in the vertical viewing angle, and a light efficiency of up to 70%, compared to a conventional BLU. Thus, the new BLU system is expected to be applied in a high-efficiency liquid crystal display.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.6
• /
• pp.77-89
• /
• 2020

The film "Parasite" portrays Korea's history and its present in a space that clearly represents the real world's hierarchy as a vertical structure. It demonstrates the problems of an insurmountable reality and the elements of various conflicts occurring below the surface of Korean society through a complex mix of human emotions and relationships. The most realistic yet unrealistic characters cross boundaries between being victims and perpetrators, defamiliarizing ordinary scenes from everyday life through their small mistakes, strange obsessions, bizarre behavior, anxious psychology, and desperate struggles. This study analyzes the expression of the film "Parasite" through its characters with the belief that the film expresses director Bong Joon-ho's consistent cinematic philosophy of taking reality beyond the traditional rules of film genres. By doing so, Bong creates a feature of the expression that shifts genres as the characters' personalities amplify related behaviors, conflicts and questions, and that this is the core of the unique nuance and distinct humor of this film. In addition, the personalities of the characters interact with all the film's elements (cinematic techniques, space, props, etc.), evoking effects of various meanings, which are transmitted through the actors'images and acting. In this respect, the study analyzes how the actors were cast in order to realistically reproduce the characters of the actors, how their acting was harmonized with the film's elements, and its features as well as how they were expressed.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.6
• /
• pp.225-240
• /
• 2022

Gyeonggi-do comprises several types of areas, including urban, semi-urban, and rural areas. The availability of public transportation services varies depending on the area types, but the fare structure is based on a simple transfer rule, i.e., a transfer is free when completed within 30 minutes. As a result, users in non-urban areas with a poor frequency of public transportation services do not receive transfer discounts because most of the bus routes in these areas have a gap of more than 30 minutes between services. In terms of equality of opportunity, the transfer rule is being applied unfavorably and, as a result, equality of opportunity of the non-urban commuter is severely affected. Therefore, this study analyzed the user benefits mainly stemming from transfer fares using the smart card data of commuters using public transportation in Gyeonggi-do. An index called the beneficiary rate of the free transfer was developed and a scenario analysis was conducted based on the various levels of the rate. The results of this analysis proved that the users of public transportation services in non-urban areas in Gyeonggi-do can only receive transfer benefits by the extended time for free transfer and not by the implementation of a uniform policy irrespective of the type of area. The study also suggested an equitable fare transfer system and policy alternatives.

• Journal of Wetlands Research
• /
• v.25 no.2
• /
• pp.121-131
• /
• 2023

This study examines the possible problem in the rainfall-runoff analysis process using the VIC (Variable Infiltration Capacity) model caused by using the effective soil depth instead of the soil depth. The parameters of the model are determined as follows. First, parameters that can be determined using available numerical information are fixed. For parameters related to direct runoff and base runoff, the recommended values of the VIC model are applied. In the case of soil depth, four cases are considered: (1) the effective soil depth is applied as the soil depth, (2) 1.5 times of the effective soil depth is applied as the soil depth by reflecting the vertical structure of the soil layer, (3) 1.25 times of the effective soil depth, and (4) 2.0 times of the effective soil depth as alternative soil depths. This study simulates the rainfall-runoff for the period from 1983 to 2020 targeting the Chungju Dam and Soyang River Dam basins of the Han River system. As a result of the study, it is confirmed that when the effective soil depth is applied instead of the soil depth, direct runoff and baseflow have opposite effects, and direct runoff increases by more than 3% while base runoff decreases by the same scale. In addition, the most influential factor in the estimation of the effective soil depth in the Chungju Dam and Soyanggang Dam basins is found to be the proportion of rock outcrop area. The difference between the direct runoff ratio and the base runoff ratio in the two basins is conformed significantly different due to the influence of the rock outcrop area.