• Current Optics and Photonics
• /
• 제8권1호
• /
• pp.30-37
• /
• 2024

Implemented at the Geochang Observatory in South Korea, our slope detection and ranging (SLO-DAR) system features a 508 mm Cassegrain telescope (f /7.8), incorporating two Shack-Hartmann wave-front sensors (WFS) for precise measurements of atmospheric phase distortions, particularly from nearby binary or double stars, utilizing an 8 × 8 grid of sampling points. With an ability to reconstruct eight-layer vertical atmospheric profiles, the system quantifies the refractive index structure function (C_n²) through the crossed-beam method. Adaptable in vertical profiling altitude, ranging from a few hundred meters to several kilometers, contingent on the separation angle of binary stars, the system operates in both wide (2.5 to 12.5 arcminute separation angle) and narrow modes (11 to 15 arcsecond separation angle), covering altitudes from 122.3 to 611.5 meters and 6.1 to 8.3 kilometers, respectively. Initial measurements at the Geochang Observatory indicated C_n² values up to 181.7 meters with a Fried parameter (r₀) of 8.4 centimeters in wide mode and up to 7.8 kilometers with an r₀ of 8.0 centimeters in narrow mode, suggesting similar seeing conditions to the Bohyun Observatory and aligning with a comparable 2014-2015 seeing profiling campaign in South Korea.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.338-345
• /
• 2005

Recently, surface-wave methods have been widely used for site investigation due to economic advantage and improved reliability. Specially, the Spectral-Analysis-of-Surface-Wave (SASW) method has been used to evaluate soil properties in geotechnical engineering. In determination of subgrade stiffness by SASW measurements, only the vertical Rayleigh waves have been used. This study proposed a framework to determine shear-wave velocity profiles by using vertical and horizontal Rayleigh waves and Love wave all together. In addition, the Common-Array-Profiling(CAP) SASW method was employed, which subgrade stiffness of profile the local material under two fixed receivers. The procedure proposed in this study was verified by comparing the shear-wave velocity profiles with the shear-wave velocity profiles of downhole testing at two geotechnical sites.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 1999년도 제2회 학술발표회
• /
• pp.176-201
• /
• 1999

지반조사를 위하여 흔히 시행하는 시추공 탄성파탐사, 즉 하향 탄성파탐사(downhole seismic), 수직 탄성파탐사(vertical seismic profiling; VSP), 시추공간 속도측정(crosshole seismic), 탄성파 토모그래피(seismic tomography)에 대하여 원리, 현장측정, 자료처리 등을 간략히 설명하고, 현장자료의 예를 제시하였으며 토목공학적 응용에 대해 검토하였다.

• 지구물리
• /
• 제5권2호
• /
• pp.75-86
• /
• 2002

평택 및 인천의 액화석유가스(LPG) 지하저장기지에 대해 VSP(Vertical Seismic Profiling)탐사를 터널에 응용한 TSP(Tunnel Seismic Prediction)탐사를 시공 중에 실시하였다. 평택 LPG 지하저장기지에서의 TSP탐사는 저장동굴이 위치한 남양호 하부에 존재하고 사전조사단계에서 파악된 단층의 방향과 규모를 확인하기 위하여 실시하였다. 단층의 위치 및 규모를 입체적으로 파악하기 위하여 진입터널, 수벽공터널 및 공사용터널에서 TSP탐사를 수행하였으며, 진입터널에서 천공된 4공의 조사 공과 비교되었다. TSP탐사 결과는 조사공 결과와 일치하였고, 파악된 단층대의 위치에 따라 기존에 설계된 저장동굴의 배치와 연장을 변경하였다. 해저에 건설된 인천 LPG 지하저장기지의 경우 시공 중에 많은 출수가 있어 효과적인 지수를 위해 지질구조에 대한 정확한 파악이 요구되었다. TSP탐사에 의한 파쇄대 분포의 파악으로 적절한 지보 및 그라우팅 대책이 이루어졌다.

• 로봇학회논문지
• /
• 제16권2호
• /
• pp.94-102
• /
• 2021

This study addresses a method for 3D reconstruction using acoustic data with heterogeneous sonar devices: Forward-Looking Multibeam Sonar (FLMS) and Profiling Sonar (PS). The challenges in sonar image processing are perceptual ambiguity, the loss of elevation information, and low signal to noise ratio, which are caused by the ranging and intensity-based image generation mechanism of sonars. The conventional approaches utilize additional constraints such as Lambertian reflection and redundant data at various positions, but they are vulnerable to environmental conditions. Our approach is to use two sonars that have a complementary data type. Typically, the sonars provide reliable information in the horizontal but, the loss of elevation information degrades the quality of data in the vertical. To overcome the characteristic of sonar devices, we adopt the crossed installation in such a way that the PS is laid down on its side and mounted on the top of FLMS. From the installation, FLMS scans horizontal information and PS obtains a vertical profile of the front area of AUV. For the fusion of the two sonar data, we propose the probabilistic approach. A likelihood map using geometric constraints between two sonar devices is built and a monte-carlo experiment using a derived model is conducted to extract 3D points. To verify the proposed method, we conducted a simulation and field test. As a result, a consistent seabed map was obtained. This method can be utilized for 3D seabed mapping with an AUV.

• 자원환경지질
• /
• 제27권2호
• /
• pp.201-207
• /
• 1994

This paper presents a technique to determine anisotropic elastic coefficients from traveltimes of seismic reflections or vertical seismic profiling (VSP) in tranversely isotropic layers whose thicknesses are known. The elastic coefficients are calculated from three different velocities (vertical, horizontal and skew velocities) which are determined from skew hyperbolic traveltimes by least-square fitting or semblance analysis. This interpretation technique is tested for synthetic traveltime data obtained for transversely isotropic models. The test shows that the anisotropic elastic constants of the models are determined accurately by this interpretation method.

• 대한자원환경지질학회:학술대회논문집
• /
• 대한자원환경지질학회 1999년도 춘계 공동학술발표회
• /
• pp.90-93
• /
• 1999

We present a high frequency electromagnetic (EM) inversion scheme for detecting and characterizing a fracture using single-hole data. At high frequencies, say above tens of mega-hertz, since displacement currents cannot be ignored, electrical permittivity as well as electrical conductivity is to be considered together for analyzing the EM scattering data. In this paper, we have developed a three-step inversion scheme to map the fracture and to evaluate its electrical conductivity and permittivity. We performed EM profiling along the z-axis using three-component receivers for each source. The model was excited by a vertical magnetic dipole and the resistant magnetic fields were inverted using the non-linear least-squares method. Background resistivity and permittivity were easily obtained using vertical magnetic fields below 1 MHz and above 10 MHz, respectively. Both the vertical and dipping sheets were successfully mapped using the phase difference between 40 and 41 MHz. The electrical property of the sheet was well resolved using the information obtained in the previous two steps and secondary magnetic fields. Our study shows the potential of imaging the fracture in single-hole survey environment using the high frequency EM method.

• 대기
• /
• 제14권1호
• /
• pp.4-23
• /
• 2004

To monitor the world's oceans and understand the role of the oceans for climate change, an Array for Real-time Geostrophic Oceanography (ARGO) program has been carried out since year 2000. Autonomous profiling floats of about 820 are reporting the vertical temperature, salinity, and pressure profiles of the upper 2000 m underwater at regular time intervals. Meteorological Research Institute (METRI) of Korea Meteorological Administration (KMA) launched 45 floats at the East Sea and the western Pacific to understand characteristics of water properties and develop the global ocean observation system as a part of international cooperation project. In this study, we introduce ARGO program, METRI-ARGO and the features of APEX float itself and their data formats. We also describe the significant points to be considered for using ARGO data.

• 지질공학
• /
• 제9권1호
• /
• pp.59-68
• /
• 1999

단층의 존재 가능성과 파쇄대에 대한 지전기적 구조를 밝히기 위하여 양산단층 남부 상천리 지역에 대하여 전기 비저항 탐사(쌍극자 탐사)와 VLF 탐사를 수행하였다. 양산탄층 추정선을 가로질러 4개의 측선에 걸쳐 실시한 전기 비저항 탐사 결과 단층선을 경계로 주로 동측에는 고비저항대가 서측에는 저비저항대가 나타난다. 이는 수직운동성분이 포함된 주향이동 단층운동에 의해 동측 기반암 블록이 상대적으로 상승한 결과로 사료된다. 파쇄대와 밀접하게 관련되어 나타나는 VLF 자료의 0점 통과점과 지전기적 저-고 비저항대 경계부는 양산단층의 제 4기 단층운동 추정선과 거의 일치하게 나타난다. 저비저항대가 지표에서 거의 수직으로 나타나는 것으로 보아 본 연구 지역의 예상 단층선을 통과하는 양산단층은 단층 양측이 10m 이상의 기반암의 깊이 차이를 나타내며 고각의 경사를 지닌 단층으로 추정된다.

• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.438-444
• /
• 2018

Structured light vision system has been widely used in 3D surface profiling. Usually, it is composed of a camera and a laser which projects a line on the target. Calibration is necessary to acquire 3D information using structured light stripe vision system. Conventional calibration algorithms have found the pose of the camera and the equation of the stripe plane of the laser under the same coordinate system of the camera. Therefore, the 3D reconstruction is only possible under the camera frame. In most cases, this is sufficient to fulfill given tasks. However, they require multiple images which are acquired under different poses for calibration. In this paper, we propose a calibration algorithm that could work by using just one shot. Also, proposed algorithm could give 3D reconstruction under both the camera and laser frame. This would be done by using newly designed calibration structure which has multiple vertical planes on the ground plane. The ability to have 3D reconstruction under both the camera and laser frame would give more flexibility for its applications. Also, proposed algorithm gives an improvement in the accuracy of 3D reconstruction.