A permanent vertical magnetization should be obtained to counteract induced vertical magnetization due to the earth's background field during the Flash D demagnetization process. A vertical susceptibility is needed to calculate a extra-permanent magnetization, which is needed to control the permanent vertical magnetization in stage 2 of Flash D demagnetization and added to the final vertical permanent magnetization. Two susceptibilities were found in this paper. One is obtained from the extra-magnetization. The other is obtained by magnetic field measurement from the scaled physical vessel when the vessel is excited by vertical magnetic field. The initial susceptibility by the extra-magnetization was 0.101~0.109 and the one from the measured magnetic field was 0.122. Two susceptibilities have a good agreement each other. From this paper, it is found that the susceptibility is able to appllied to calculate the extr-magnetization.
소자장치가 없는 함정의 경우 탈자 시에 지구자계와 반대방향으로 수직자화를 부여하여 수중에서 수직방향의 자계가 발생하지 않도록 한다. 탈자 시에 수직자화를 부여하는 탈자방법으로는 Flash D가 있어나 수직자화의 예측이 어렵다. 본 논문에서는 Flash D와는 달리 바이어스 자계를 인가하여 수직방향으로 자화를 형성하는 것에 대해 검토하였다. 이용된 시편은 두께 0.15mm의 아연도금 강판을 이용하여 함정의 선수에서 선미까지의 형상을 고려하여 원형, 삼각, 사각형의 형태를 가진다. FEM해석을 통해 시편형상에 따른 자계신호의 차이를 구하였고 인가자계에 의한 잔류자화특성곡선을 실험을 통해 구하였다. 바이어스자계를 수평 및 수직으로 각각 인가하여 잔류자화에 의한 자계신호를 측정하였다. 시편에 인가하는 자계는 파형발생기를 이용하여 솔레노이드 코일에 전류를 흘려 발생시켰으며 수직바이어스자계는 솔레노이드 코일 아래에 사각 코일을 설치하여 발생시켰다. 신호측정은 자계센서를 이용하였다. 이 실험을 통해 수직 및 수평 바이어스 자계는 시편에 수직 및 수평자화를 각각 형성시켰으며 수직자화는 수직바이어스 자계와 선형적인 관계를 가져 함정에 형성되는 수직자화를 예측할 수 있음을 알았다.
함정의 탈자결과 평가를 위한 자계신호의 분리방법에 대한 이론적 근거와 해저 면에 설치되는 사각코일로부터 발생하는 불균일한 자계가 분리결과에 미치는 영향을 측정 신호와 FEM해석을 통해 검토하였다. 측정신호는 제작된 모델함에서 발생하는 자계를 자계센서로 측정한 것이며 FEM 계산은 제작된 모델함과 동일한 형상으로 수행되었다. ILM(induced longitudinal magnetization) 신호와 IVM(induced vertical magnetization) 신호는 함정이 가지는 투자율과 지자계의 수평과 수직방향 성분에 의해 각각 발생하는 자화에 의한 것이며, PLM(permanent longitudinal magnetization) 신호와 PVM(permanent vertical magnetization) 신호는 함정의 영구자화의 수평성분과 수직성분에 의한 것임이 확인되었다. 또한 사각 코일의 수직방향의 자계는 균일한 지자계를 완전히 상쇄할 수 없어 사각코일의 면적에 가까운 크기를 가지는 함정 일수록 사각코일의 자계 불균일성의 영향을 크게 받게 됨을 알았다.
Kim, Young-Hak;Kim, Ki-Chan;Shin, Kwang-Ho;Yoon, Kwan-Seob;Yang, Chang-Seob
Journal of Magnetics
/
제16권4호
/
pp.453-456
/
2011
Demagnetization for a tube sample which was made of a galvanized steel sheet was performed by applying a magnetic field with a decrement to remove the remanent magnetization of the material. An orthogonal fluxgate magnetic field sensor was used to measure a magnetic field created from a ferromagnetic material. To evaluate the remanent magnetization, the measured magnetic fields were separated into two magnetic field components by the remnant magnetization and the induced one. The horizontal and the vertical bias fields should be controlled separately during demagnetization to remove the horizontal and the vertical components of the remanent magnetization of the tube sample.
This paper describes a new magnetization method for non-destructive testing with magneto-optical sensor (denoted as MO sensor) which have the following characteristic : high observation sensitivity, independence of the crack orientation, and precise imaging of a complex crack geometry such as multiple cracks. When a magnetic field is applied normally to the surface of a specimen which is significantly larger than its defects, approximately the same magnetic charge per unit area occurs on the surface of the specimen. If there is a crack in the specimen, magnetic charge per unit area has the same value at the bottom of the crack. The distribution of the vertical component of the magnetic flux density, B$\_$Z/, is almost uniform over the no-crack area (denoted as B$\_$Z,BASE/), while the magnetic flux density is smaller in the surroundings of the crack(denoted as B$\_$Z,CRACK/) If B$\_$Z, BASE/ is a bit larger than the saturated magnetic flux density of the MO sensor (B$\_$s/) , then small magnetic domains occur over the crack area and a large domain over the non-crack area because B$\_$Z,CRACK/ is smaller than B$\_$s/.
본 논문은 함정의 형상이 탈자 이후에 함정에 형성되는 수직자화에 미치는 영향에 대해 조사하였다. 선박의 전면 전개도로부터 함정의 형상을 삼각형, 사각형, 원형으로 선택하여 지자계에 의한 수직방향의 유도자화를 FEM 정자장 해석으로 조사하였다. 탈자과정 중에 자화에 의한 자계를 측정하였으며, 탈자 이후 성분분리를 통해 영구자화에 의한 자계의 수평 및 수직성분의 크기를 바이어스 자계의 변화에 따라 조사하였다. 이 실험으로부터 함정의 형상을 고려하는 탈자처리 방법이 필요하며 방법으로 선수와 선미 쪽에 권선 간격을 좁게 하여 함정의 중앙부분보다 비교적 더 큰 자계가 인가되도록 하는 것이 바람직하다는 것을 알았다.
본 연구는 햅틱 진동자의 개발과정에 있어 성능인자의 단계별 설정절차와 성능 및 소형화를 위한 자석의 착자방법에 대한 연구를 수행하였다. 착자방법에 대한 연구는 수평착자와 수직착자의 구성방법에 따른 전자기력을 비교분석하여 수행하였으며, 수행결과 수평착자가 우수한 것으로 나타났다. 시스템적 설계 절차로는 제품의 특성으로부터 설계 인자를 설정하는 단계적 절차를 구성하여 시작품을 제작하고 시험을 통하여 검증하였다. 해석적 방법에서는 진동응답 특성 해석과 전기장의 해석을 독립적으로 수행하였으며, 시험결과와의 검증을 통해 잘 일치하는 결과를 도출하였다. 제품신뢰성 확보를 위한 신뢰성 기반 설계인자는 스프링 높이, 용접 위치, 코일의 위치로 선정하였다. 그리고 설계 인자에 따른 전자기장 민감도 및 성능 변화를 분석하였고 이를 바탕으로 신뢰성 기반의 고성능 햅틱 진동자를 구현할 수 있도록 설계방법을 제시하였다.
선형 자기쌍극자 모델의 하나인 철근에 대하여 3성분 자력계를 이용한 자력검층을 실시한 후 검층자료를 최소 자승법에 의한 역산을 이용하여 해석하였다. 본 실험에 사용된 철근의 길이는 1.12 m, 샘플링 간격은 0.05 m, 자력계와 철근사이의 거리는 0.3 m이며, 철근의 상단부를 깊이 0 m 지점에 고정하였다. 철근은 연직에 가깝도록 위치시켰다. FFT를 이용하여 평활화한 자기이상을 역산의 입력자료로 활용하였다. 검층자료의 해석을 위하여 선형 자기쌍극자의 상단부 심도, 길이, 단위 길이 당 자기모멘트, 자화방향(편각 및 복각), 경사방향과 경사각 등을 미지수로 설정하였다. 자기이상의 수평성분 및 수직성분 각각에 대한 역산 결과와 수평성분과 수직성분을 동시에 고려한 역산 결과를 비교하였는데 각각의 역산결과는 다소 차이를 보인다. 자기이상의 수평성분과 수직성분을 동시에 고려하여 역산을 수행하는 것이 각각의 성분을 역산하는 경우보다 정확한 해석이 가능한 것으로 판단된다. 이 때 철근 하단부의 추정 심도는 1.18 m로, 실제 심도인 1.12 m에 매우 근접하며, 철근의 복각은 -76°로 추정되었다. 철근의 복각이 음(-)의 값을 갖는 것은 철근의 유도자화 강도에 비하여 잔류자화 강도가 훨씬 커서, 전체적인 자화 방향이 철근의 상단 방향을 향하고 있기 때문으로 해석된다.
Leakage magnetic flux (LMF) is widely used for non-contact detection of cracks. The combination of optics and LMF offers advantages such as real time inspection, elimination of electrical noise, high spatial resolution, etc. This paper describes a new nondestructive evaluation method based on an original magneto-optical inspection system, which uses a magneto-optical sensor, LMF, and an improved magnetization method. The improved magnetization method has the following characteristics: high observation sensitivity, independence of the crack orientation, and precise transcription of the geometry of a complex crack. The use of vertical magnetization enables the visualization of the length and width of a crack. The inspection system provides the images of the crack, and shows a possibility for the computation of its depth.
본 연구에선는 수직 Bridgman 법으로 묽은 자성 반도체 $Si_{1-x}Mn_xTe_{1.5} $ 단결정을 성장시켜 Mn의 조성비 변화에 따른 광학적, 전지적, 그리고 자기적 특성을 조사하였다. X-선 회절 실험으로부터 육방정계(hexagonal) 구조임을 확인하였다. 광흡수 측정으로부터 에너지 띠 간격은 조성비 x와 온도 증가에 대하여 감소함을 보였다. 성장시킨 시료의 경우 강자성 특성을 나타내었으며, Curie 온도는 80K 이상이었다. Mn의 조성비가 증가함에 따라 평균 자기 모멘트와 보자력 값은 증가하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.