• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.1
• /
• pp.19-23
• /
• 2014

For the application of light-emitting diodes (LEDs) for general illumination, the development of high power LEDs chips became more essential. For these reasons, recently, modified vertical LEDs have been developed to meet various requirements such as better heat dissipation, higher light extraction and less cost of production. In this research, we investigate the effect of Size and Array of N-GaN contact on operation voltage with new structured padless vertical LED. We changed the size and array of N-electrodes and investigated how they affect the operation voltage of LEDs. We simulated the current crowding and expected operation voltage for different N-contact structures with commercial LED simulator. Also, we fabricated the padless vertical LED chips and measured the electrical property. From the simulation, we could know that the larger size and denser array of n-electrodes could make operation voltage decrease. These results are well in accordance with those measured values of real padless vertical LED chips.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.4
• /
• pp.71-76
• /
• 2015

Recently, light emitting diodes (LEDs) have been studied to improve their efficiencies for the uses in various fields. Particularly in the aspect of chip structure, via hole type vertical LED chip is developed for improvement of light output power, and heat dissipations. However, current vertical type LEDs have still drawback, which is current concentration around the n-contact holes. In this research, to solve this phenomenon, we introduced isolation layer under n-contact electrodes. With this sub-electrode, even though the active area was decreased by about 2.7% compared with conventional via-hole type vertical LED, we could decrease the forward voltage by 0.2 V and wall-plug efficiency was improved approximately 4.2%. This is owing to uniform current flow through the area of n-contact.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.414-414
• /
• 2009

나노스피어 리소그래피는 기존의 리소그래피 방법에 비해 나노 크기 패턴을 제작하는데 공정이 간단하며 재현성있게 대면적에 패터닝이 가능하다는 장점이 있다. 본 연구에서는 Vertical LED(V-LED)의 External quantum efficiency 향상을 위하여 나노스피어 리소그래 피를 이용하여 V-LED의 n-GaN 표면을 패터닝을 하였다. n-GaN 위에 Sputter를 이용하여 $SiO_2$를 증착 후 나노스피어를 스핀 코팅을 이용하여 단일막을 형성하였다. 그 후, 반응성 이온 식각 장치를 이용하여 나노스피어의 크기를 조절하고 $SiO_2$층을 식각하였다. 다음과 같은 공정 후 $SiO_2$층을 Mask층으로 하여 n-GaN 표면을 식각하였다. 실험 결과 나노스피어 리소그래피를 이용하여 V-LED의 External quantum efficiency 향상을 위한 n-GaN 표면의 패턴 제작이 가능함을 확인할 수 있었다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.11
• /
• pp.1-5
• /
• 2015

In this paper, we propose the optical system design for a medium sized LED marine lanterns which simplifies the multi-layer structure into a single structure. In order to satisfy the target fixed intensity(35,000cd) and vertical divergence($-2.5^{\circ}{\sim}-4.0^{\circ}$, $+2.5^{\circ}{\sim}+4.0^{\circ}$), we use the total internal reflection collimator lens. And a Monte Carlo simulation has been utilized to optimize a condition of a LED package, TIR lens and outside lens. The computer simulation results indicated that this LED marine lanterns can produce of a fixed intensity(35,382cd) and vertical divergence($-3.1^{\circ}{\sim}+2.5^{\circ}$). Using the this optical system, we achieve the target value of LED lanterns.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.593-593
• /
• 2013

나노패턴 제작은 차세대 초고밀도 반도체 메모리기술과 바이오칩 등 나노기술의 핵심 분야로, 나노패턴 구조를 나노-바이오 전자소자 및 반도체 산업분야에 적용할 경우 시장 선점 및 막대한 부가가치 창출 등을 통해 국가경쟁력 강화에 크게 기여할 것으로 기대된다. 하지만 대면적 패턴형성이 어려워 뿐만 아니라 $300^{\circ}$ 이상의 열처리 과정에 의한 생산성이 떨어진다. 또한 나노구조가 잘 이루어진 차원, 표면상태, 결정성, 화학적 조성을 갖도록 하는 합성 및 제조상의 어려움 때문이다. 이에 반해 자기정렬 ITO Dot 형성은 상기 기술한 1차원 나노구조형성을 하는 것에 비하여, 나노구조를 제작하기 위하여 공정이 단순하며, 비용 및 생산성 측면에서 유리 할 것으로 생각된다. 이에 본 연구는 E-beam을 이용하여 형성된 ITO 박막에 HCl solution을 이용하여 자기정렬 ITO Dot 형성 후 n-AlGaInP Vertical LED[VLED] 표면에 nano pillar의 두께에 각기 다르게 형성하였으며, 최종적으로 제작된 VLED의 전기적, 광학적 특성을 조사하였다.

• Journal of the Korean Vacuum Society
• /
• v.17 no.4
• /
• pp.353-358
• /
• 2008

In order to increase extraction efficiency of AlGaInP-based vertical RED LEDs, chemical wet etching technique was produced by using a roughened surface with triangle-like morphology. A commonly used $H_3PO_4$-based solution was applied for chemical wet etching. The light extraction of AlGaInP LED was related to the n-side roughed surface morphology. The morphology of roughed surface is analyzed by the atomic force microscope (AFM). As a result, the roughed surface AlGaInP LED has a root-mean-square (RMS) roughness of 44 nm. The brightness shows 41% increase after roughening n-side surface, as compared to the ordinary flat surface LED.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.8
• /
• pp.24-31
• /
• 2014

This paper dealt with the LED optical illumination system design for the Masthead navigation light to replace halogen lamps. We made Fresnel lens satisfy luminous intensity distribution of "Convention on the International Regulation for Preventing Collisions at Sea(COLREG)". The optical system is designed by classifying three parts: light source, lens, and cut off plate. The source of light has been made to have the uniform horizontal and vertical light distribution by placing 6 LEDs at intervals of $54^{\circ}$, and as the cylindrical Fresnel lens, the lens has been designed to achieve the uniform horizontal and vertical light distribution in the range of plain light. Finally, the cover has been designed to block the light from the outside of plain light and ultimately met the standards for light distribution of navigation lights. In addition, the validity of design has been verified with manufacturing a trial product.

• Journal of Biosystems Engineering
• /
• v.37 no.5
• /
• pp.314-318
• /
• 2012

Purpose: This study was conducted to develop a measurement system for determining photosynthetic photon flux (PPF) distribution and illumination efficiency of LED lamps. Methods: The system was composed of a linear moving sensor part (LMSP), a rotating part to turn the LMSP, a body assembly to support the rotating part, and a motor controller. The average PPF of the LED lamp with natural cooling and water cooling was evaluated using the measurement system. Results: The PPF of LED lamp with water cooling was 3.1-31.7% greater than that with natural cooling. Based on the measured value, PPF on the horizontal surface was predicted. Illumination efficiency of the LED lamp was slightly increased with water cooling by 3.4%, compared with natural cooling. A simulation program using MATLAB was developed to analyze the effects of the vertical distance from lighting sources to growing bed, lamp spacing, and number of LED lamps, on the PPF distribution on the horizontal surface. The uniformity of the PPF distribution of the LED lamps was fairly improved with 15 cm spacing, as compared to the 5 cm spacing. By simulation, PPF of $217.0{\pm}27.9{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ was obtained at the vertical distance of 40 cm from six LED lamps with 12 cm spacing. This simulated PPF was compared to the measured one of $225.9{\pm}25.6{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. After continuous lighting of 346 days, the relative PPF of LED lamps with water cooling and natural cooling was decreased by 6.6% and 22.8%, respectively. Conclusions: From these results, it was concluded that the measurement system developed in this study was useful for determining PPF and illumination efficiency of artificial lighting sources including LED lamp.

• Composites Research
• /
• v.28 no.5
• /
• pp.322-326
• /
• 2015

We developed the high-power LED beacon and investigated the applicability of composite materials for the light-weight design of LED beacon. By means of the application of composite materials, the vertical deformation could be reduced by 17% and the total weight of LED beacon 8.9 kg comparable to 20% light-weighting against aluminum beacon. In thermal radiation test, the maximum temperature of LED package was measured to $63.5^{\circ}C$ under ambient temperature ($20^{\circ}C$), which is acceptable considering both performance and lifespan of LED packages. In this study, the applicability of composite materials was demonstrated for light-weight design of high-power LED beacon.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.710-713
• /
• 2008

LED Scanning Backlight Stereoscopic Display with Shutter Glasses is provided to realize stereoscopic image viewing even in a liquid crystal display. The eye shutter signal is alternately switched from the left eye to the right eye with 120Hz of LCD Vertical synchronization (V-sync).