• 설비공학논문집
• /
• 제7권1호
• /
• pp.63-72
• /
• 1995

Convective heat transfer in a two-dimensional horizontal and vertical channel with isothermal rectangular beams attached to one adiabatic wall is investigated from the numerical solution of Navier-Stokes and energy equations. The solutions have been obtained for dimensionless beam spacings, S/L=1~4, aspect ratios of beam, H/B=0.25~4, Reynolds numbers, Re=50~1000 and Grashof numbers, $Gr=0{\sim}5{\times}10^4$. The total mean Nusselt number, Nu_T for horizontal and vertical channels shows same value at Gr=0. As Gr increases, Nu_T for horizontal channel increases, but Nu_T for vertical channel shows similar value at S/L=2, H/B=0.25, Re=100. The total mean Nusselt number for horizontal channel is higher than that for vertical channel. As H/B increases, $Nu_T$ for both channel decrease at $Gr=10^4$, Re=100.

• 대한기계학회논문집
• /
• 제17권2호
• /
• pp.438-444
• /
• 1993

The circuit board of an electronic equipment were simulated with a vertical channel which had thermal blocks protruded from one of the channel walls. A rought front plate was made of a circuit board attached with short wires to simulate the back side of a printed circuit board. Natural convection experiments were carried out to study the effects of channel space and rough front plate and to find the suitable characteristic value after the fourth row. The effect of a rough front plate was negligble. There were negligible effects of the channel space on the first and second heaters. Heat transfer coefficients after the third row decreased as the channel space decreased. Heat transfer coefficients were almost constant for larger than 20 mm channel space. A characteristic length was suggested to non-dimensionalize Nu and Ra numbers in a vertical channel with protruded heaters. A correlation was obtained using the new characteristic lengths.

• 제어로봇시스템학회논문지
• /
• 제14권8호
• /
• pp.727-732
• /
• 2008

In this paper, the state-space representation of generalized complimentary filter is proposed. Complementary filter has the suitable structure to merge information from sensors whose frequency regions are complementary. First, the basic concept and structure of complementary filter is introduced. And then the structure of the generalized filter and its state-space representation are proposed. The state-space representation of complementary filter is able to design the complementary filter by applying modern filtering techniques like Kalman filter and $H_{\infty}$ filter. To show the usability of the proposed state-space representation, the design of Inertial Navigation System(INS) vertical channel damping loop using Global Positioning System(GPS) is described. The proposed GPS/INS damping loop lends the structure of Baro/INS(Barometer/INS) vertical channel damping loop that is an application of complementary filter. GPS altitude error has the non-stationary statistics although GPS offers navigation information which is insensitive to time and place. Therefore, $H_{\infty}$ filtering technique is selected for adding robustness to the loop. First, the state-space representation of GPS/INS damping loop is acquired. And next the weighted $H_{\infty}$ norm proposed in order to suitably consider characteristics of sensor errors is used for getting filter gains. Simulation results show that the proposed filter provides better performance than the conventional vertical channel loop design schemes even when error statistics are unknown.

• Nuclear Engineering and Technology
• /
• 제47권5호
• /
• pp.534-545
• /
• 2015

In the very high temperature reactor (VHTR), which is a next generation nuclear reactor system, ceramics are used as a fuel coating material and graphite is used as a core structural material. Even if a depressurization accident occurs and the reactor power goes up instantly, the temperature of the core will change only slowly. This is because the thermal capacity of the core is so high. Therefore, the VHTR system can passively remove the decay heat of the core by natural convection and radiation from the surface of the reactor pressure vessel. The objectives of this study are to investigate the heat transfer characteristics of natural convection of a one-side heated vertical channel with inserted porous materials of high porosity and also to develop the passive cooling system for the VHTR. An experiment was carried out using a one-side heated vertical rectangular channel. To obtain the heat transfer and fluid flow characteristics of the vertical channel with inserted porous material, we have also carried out a numerical analysis using a commercial Computational Fluid Dynamics (CFD) code. This paper describes the thermal performances of the one-side heated vertical rectangular channel with an inserted copper wire of high porosity.

• 한국해양학회지
• /
• 제12권1호
• /
• pp.7-12
• /
• 1977

Vertical mixing in the ocean affects the formation of water masses as well as the vertical distribution of nutrients and dissolved substances. this study is to investigate the effect of stability on the intensity of vertical transfer in the case of shallow and straitfied channel. It is found that the relation of the stability and vertical turbulent diffusion is given by K$\sub$z/ = -${\beta}$-(c+${\beta}$) / ${\alpha}$(E-1/${\alpha}$) where K$\sub$z/ and E denotes the vertical turbulent diffusion coefficient and stability, respectively. The empirical coefficients ${\alpha}$, ${\beta}$ and c depend on the magnitude of vertical components and stability, i.e., through thermocline intensity. The study indicates that the diffusivity of the surface mixed layer is (K$\sub$z/)=300∼1,200$\textrm{cm}^2$/sec, the thermocline layer is (K$\sub$z/)= 50∼200$\textrm{cm}^2$/sec and the cold layer is (K$\sub$z/)=200∼600$\textrm{cm}^2$/sec based on near- minimum least-squares error estimates from the regression analysis. An important result of our study comes out that the model is in accordance with the general trends of the effect of stability on the vertical turbulent diffusion coefficients in the case of shallow and strongly stratified channel.

• 대한기계학회논문집B
• /
• 제35권6호
• /
• pp.609-615
• /
• 2011

2차원 채널 내의 수직 평판을 지나는 유동에 대한 이론적 연구를 수행하였다. 수직 평판은 채널의 상하 중앙부에 위치하며, 수직 평판에서 멀리 떨어진 채널 내에는 포아제 유동이 존재한다. 스톡스 근사를 적용하고 고유함수 전개와 점 배열 방법을 사용하여 유동장을 해석하였다. 해석의 결과로 유동 함수와 압력분포식을 구하였으며, 채널의 벽면과 수직 평판에 작용하는 압력 및 전단응력 분포를 계산 하였다. 또한, 수직 평판으로 인해 부가적으로 발생하는 압력 강하와 수직 평판이 받는 힘을 수직 평판 길이의 함수로 계산하였으며, 대표적인 수직 평판의 길이에 대하여 유선과 압력분포도를 도시하였다. 또한, 작은 레이놀즈 수가 유동에 미치는 영향을 알아보기 위하여 레이놀즈 수가 작은 층류유동의 경우에 대하여 수치해석을 수행하였다.

• 한국수자원학회논문집
• /
• 제39권12호
• /
• pp.1023-1030
• /
• 2006

종방향 유속의 특성을 파악하기 위해서 중심각이 $180^{\circ}$인 순환수로에서 실험을 수행하였으며, 3차원 유속장 측정은 측방 음파 도플러 유속계를 이용하였다. 기존의 종방향 유속식들의 단점들을 검토하였다. 종방향 운동 방정식에 와점성 개념을 도입하여 새로운 종방향 유속의 연직분포 식을 개발하였다. 종방향 유속의 연직분포들을 비교한 결과 잘 일치함을 보여주고 있으며, 곡선수로에서 곡률의 변화는 종방향 유속의 연직분포 변화 및 최대 유속 발생 지점에 영향을 미치는 것을 발견하였다.

• Nuclear Engineering and Technology
• /
• 제54권2호
• /
• pp.546-553
• /
• 2022

Narrow rectangular channels are employed in nuclear research reactors that use plate-type nuclear fuels, high heat-flux compact heat exchangers, and high-performance micro-electronics cooling systems. Two-phase flow in narrow rectangular channels is important, and it needs to be better understood because it is considerably different than that in round tubes. In this study, mechanistic models were developed for the flow regime transition criteria for various flow regimes in co-current air-water two-phase flow for vertical downward flow inside a narrow rectangular channel. The newly developed criteria were compared to a flow regime map of downward air-water two-phase flow inside a narrow rectangular channel with a 2.35-mm gap width under ambient temperature and pressure conditions. Overall, the proposed model showed good agreement with the experimental data.

• Nuclear Engineering and Technology
• /
• 제12권3호
• /
• pp.153-162
• /
• 1980

냉각재상실사고의 재관수 단계중 연료봉 피복재의 온도거동 및 열전달 기구를 파악하는 것은 비상노심냉각계통 및 원자로의 안전성해석에 중요하다. 냉각재유동채널의 방위가 rewetting과정에 미치는 영향을 연구하기 위하여 수직 및 수경 유동채널을 이용한 실험을 수행하였으며, 노심이 수평압력관으로 구성되어 있는 CANDU원자로에 관한 실험을 중점적으로 수행하여 그 결과를 수직채널의 결과와 비교 하였다. 또한 rewetting현상을 육안관찰가기 위해 환상형 테스트부 및 외부에서 가열되는 석영관을 사용하였다. 실험결과로써 수평채널에서의 rewetting 속도는 유동의 층상 현상에 크게 영향을 받으나 그 평균값은 수직채널리 경우와 큰차이없음을 알 수 있었다.

• 통상정보연구
• /
• 제14권2호
• /
• pp.81-119
• /
• 2012

본 연구에서는 유통경로 상의 지배구조 유형이 기업성과에 미치는 영향에 대해 실증적으로 검증해 보았다. 수출유통의 성과를 극대화 하기위한 일반적 전략대안은 수직적 통합에 의한 성과관리이다. 그러나 수출유통에 있어서 소유구조에 의한 수직적 통합은 용이하지 않은 경우가 대부분이다. 본 연구의 결과, 소유구조 이외에도 다양한 관계전략으로 유통성과 관리가 가능하다는 것을 알 수 있었다. 본 연구의 전략적 시사점으로, 수출유통경로결정에 있어서, 소유구조이외에도 거래관계구조 상의 정보교류, 협력관계, 신뢰관계 확립 등을 통하여 유통경로의 수직적 통합과 같은 수준의 성과를 이루어 낼 수 있다는 것을 제시할 수 있다.