• 한국결정성장학회지
• /
• 제2권1호
• /
• pp.60-69
• /
• 1992

$TiCl_4$와(NH_4)_2SO_4$를 액상 반응시켜 암모늄 티타늄 설페이트를 형성시킨 뒤 하소하여 미립의 $TiO_2$분말을 만들었다. Anatase 분말로 Verneuil장치에서 Rutile단결정을 성장시킨 뒤 물성을 조사하였다. 최적의 성장조건은 $H_2:O_2=3:1$ 성장온도는 $1900^{\circ}C$ 분말공급속도는 10g/hr였다.

• 한국세라믹학회지
• /
• 제25권5호
• /
• pp.495-501
• /
• 1988

Verneuil method uses oxyhydrogen flame for its heat source. This method was used to grow corundum monocrystals. Parametersof this method are feeding rate, gas pressure, lowering rate and growth axis. These parameters were examined. Crystals's qualities and shapes are affected by these parameters. Crystals having good qualities and shape were grown under the conditions that feeding rate, 0.2∼0.5g/min, lowering rate, 10∼20mm/hr ; gas pressure, 3∼4psi ; growth axis was shifted 60 degrees from c axis.

• 한국세라믹학회지
• /
• 제29권9호
• /
• pp.689-694
• /
• 1992

Strontium Titanate single crystal is grown by Verneuil method. Feed materials were prepared by coprecipitation method which started with Sr(NO3)2 and TiCl4. SrTiO3 can not be grown from feed materials having the stoichiometric components due to volatilization of SrO, when the powder added more 3 wt% SrO used, the crystal can be grown. Growth conditions that the pressure of oxygen and hydrogen gas was 5 psi, the flow rate of oxygen and hydrogen was 7.3 and 30ι/min respectively, the growth rate was 20 mm/hr were optimum. The grown single crystal has the diameter of 10~15 mm and its length is 30~40 mm. The grown crystal was deep brown color and somewhat transparent. The color of grown crystal was lightened after annealing.

• 한국세라믹학회지
• /
• 제31권12호
• /
• pp.1423-1428
• /
• 1994

TiO2 doped sapphire single crystals were grown by Verneuil method. The doping amount of TiO2 to Al2O3 were varied 0.1, 0.2, 0.3 wt% respectively. The grown crystals have reddish color and somewhat transparent. Optimum growth condition was established by changing growth rate and gas flow ratio. Growth condition are as follows; The flow rate range of oxygen ws 5.0~7.3 ι/min and that of hydrogen was 16~25ι/min and average growth rate was 6~8mm/hr. The basic cause of color appearence and defects in crystal were studied.

• 한국세라믹학회지
• /
• 제29권10호
• /
• pp.822-826
• /
• 1992

SiO2 doped sapphire single crystals were grown by Verneuil method using feed material which prepared by adding SiO2 in Al2O3. Crystal growing were attempted with varing doping amount of SiO2 from 0.01 to 1.0 wt% and when the doping amount of SiO2 were 0.01~0.04 wt%, single crystals could be attained. Starting materials for feed powder were 99.99% purity alumina and extra pure SiO2 powder. Mixing these two materials by wet milling for 24 hours and drying the mixture and then was calcined at 900~110$0^{\circ}C$ for 2~4 hours. The grown crystals had yellowish color and were somewhat transparent. During growing process the flow range of oxygen was 5~7.5ι/min and of hydrogen was 13~25ι/min, the average growth rate was 7.0~11 mm/hr. The pressure of gases were fixed at 5psi. The color of crystal was appeared and mechanical property of sapphire was developed by doping of SiO2.

• 한국결정성장학회지
• /
• 제15권6호
• /
• pp.225-228
• /
• 2005

본 연구에서는 장잔광성 $SrAl_2O_4:Eu^{2+},\;Dy^{3+}$ 단결정을 베르누이법으로 성장시켰다. 성장된 $SrAl_2O_4:Eu^{2+},\;Dy^{3+}$ 단결정은 지름이 5 mm, 길이는 55 mm이다. 상온(300 K)과 저온(15 K)에서 각각 photoluminescence를 측정한 결과, 상온에서는 ${\lambda}=526nm$에서만 나타났으나, 저온에서는 454nm 영역과 526nm 영역에서 발광피크를 나타내었다. 이는 형광도료로 사용되는 분말과 유사한 결과이다. 결정성장 시 적외선 광고온계로 녹는점을 측정한 결과는 $1968^{\circ}C$였다. 결정을 성장시키는 최적의 조성은 $SrCO_3:Al(OH)_3:Eu_2O_3:Dy_2O_3$ = 1 : 2 : 0.015 : 0.02이고 $H_2:O_2$의 혼합비는 약 4 : 1이다. 성장속도는 시간당 5mm이다. 성장된 단결정의 결정구조는 XRD로 측정하였다.

• 한국결정성장학회지
• /
• 제4권3호
• /
• pp.325-335
• /
• 1994

Floating zone법으로 Spinel$(MgO.Al_2O_3)$을 성장시켰다. $MgO.Al_20_3$ spinel의 용융점은 $2135^{\circ}C$ 정도이고, 용융액으로부터 단결정을 성장시키는 방법에 있어서 매우 중용한 사항이다. Verneuil법과 RF-유도가열법을 이용한 czochralski법으로 성장시킨 경우가 보고된 바 있으나, 본 공법으로는 처음이라 사료된다. 본 연구에서는 halogen적외선 lamp를 이용한 image fur-nace에서 용융하여 아래쪽으로 하강함으로 인해 단결정을 육성시키는 floating zone법을 사용하여, $MgAl_2O_4$ spinel 단결정을 성장하였다. 또한 전이금속 이온을 doping하여 용융점의 하강 효과와 함께 적색, 녹색을 띈 단결정을 성장시켰다. 결론으로 성장계면과 용융대의 안전성에 주목하여 spinel 단결정 성장 기구를 규명하려 하였으며 성장계면이 오목함(결정쪽으로)에서 비롯되는 성장시의 양상에 대해 고찰하였다.

• 한국결정성장학회지
• /
• 제9권1호
• /
• pp.29-33
• /
• 1999

Verneuil 법에 의해 성장된 무색 sapphire {0001}, ${10\bar{1}0}$ 결정면에 전이금속 Cr을 확산시키고, 물리적, 전기적, 광학적 특성을 개선하였다. 확산분말은 금속산화물 분말과 금속분말을 혼합한 후 사용하였다. 혼합분말을 사용하였을 때 확산은 오랜시간 높은 온도를 필요로 하며 상대적으로 서서히 이루어 졌다. 금속분말은 $1{\times}10^{-4}$ torr, $2050^{\circ}C$의 조건에서 1차 기화하였고 이후 $2050~2150^{\circ}C$, 질소가압 6 atm의 확산조건에서 유지하였다. 사파이어의 표면밀도는 0.2254(c)와 $0.1199\;atom/{\AA}^2(a)$이었다. 확산이 이루어진 sapphires는 붉은색으로 변하였다. 고용반응은 ${10\bar{1}0}$ 결정면이 {0001} 보다 더욱 깊게 확산되었고, 면밀도가 확산효과를 결정하는 주요인자이었다.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1998년도 PROCEEDINGS OF THE 14TH KACG TECHNICAL MEETING AND THE 5TH KOREA-JAPAN EMGS (ELECTRONIC MATERIALS GROWTH SYMPOSIUM)
• /
• pp.77-79
• /
• 1998

Metallic chromium was diffused in the{0001},{1120} white sapphires which were grown by the Verneuil method to enhance the physical properties of the sapphires. Chromium metal vapour pressure and {{{{ { N}_{2 } }}}} pressure were kept by {{{{ { 1$\times$10}^{-4 } }}}} torr at 21 50 $^{\circ}C$ and 6 atm in the quartz-tube, respectively. The color do the Cr-doped sapphires was changed to light red. Chromium was diffused faster in the {1120} than 수 the {0001} plane. It was speculated that the planar density was one the factors determining diffusion coeffcient

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1998년도 PROCEEDINGS OF THE 15TH KACG TECHNICAL MEETING-PACIFIC RIM 3 SATELLITE SYMPOSIUM SESSION 4, HOTEL HYUNDAI, KYONGJU, SEPTEMBER 20-23, 1998
• /
• pp.97-102
• /
• 1998

Transition metal Cr3+ and Fe3+ ion was diffused in white sapphire {0001}, {1010} crystal plane which were grown by the Verneuil method. It enhanced and changed the physical, electrical and optical properties of sapphires. After mixing the metallic oxide and metal powder, it were used for diffusion. Metallic oxide was synthesized by precipitation method and it's composition was mainly alumina which doped with chromium or ferric oxide. In case using metallic oxide, the dopping was slowly progressed and it needed the longer duration time and higher temperature, relatively. Metallic powder was vapoured under 1x10-4 torr of vacuum pressure at 1900(iron metal) and 2050(chromium)℃, first step. Diffusion condition were kept by 6atm of N2 accelerating pressure at 2050∼2150℃. Each surface density of sapphire crystal are 0.225(c) and 0.1199atom/Å2(a). The color of the Cr-doped sapphires was changed to red. Dopping reaction was come out more deep in th plane of {1010} than {0001}. It was speculated that the planar density was one of the factors to determine diffusion effect.