• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제11B권4호
• /
• pp.169-174
• /
• 2001

A novel simulation scheme of transient phenomenon for the photovoltaic (PV) generation system under the real weather conditions has been proposed in this paper. A grid connected PV array is simulated using PSCAD/EMTDC. The transient changes of the output current of PV array under the real weather conditions is described and the output current of DC/AC converter flowing through the utility power network is also analyzed with the PWM switching width. Moreover, the MPPT control of PV generation system is combined to the system during the simulation for the comparison purposes of the control schemes. The outcome of the simulation demonstrates the effectiveness of the proposed simulation scheme. The result shows that the cost effective verifying for the efficiency or availability and stability of PV generation systems and the comparison research of various control schemes like MPPT under the same real whether conditions are eventually possible.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.337-342
• /
• 2011

A roller rig has been widely used in the study about dynamic stability and railway safety. However, the cost for constructing the roller rig and the difficulty in adjusting the design parameters for vehicle systems lead to the development of a small scale simulator which is cheaper than the large scale test systems and easy to control the parameters affecting dynamic characteristics of the railway vehicle. For the operation of the small scale test system called a small scale simulator, it is required to investigate the performance and characteristics of the system. This could be achieved by a comparative study between an analysis and an experiment. This paper presented the analytical model which could be used for verifying of the test results and understanding of the physical behavior of the dynamic system comprising the small scale bogie and the simulator.

• 음성과학
• /
• 제15권1호
• /
• pp.75-83
• /
• 2008

The interior of an automobile is a very noisy environment with both stationary cruising noise and the reverberated music or speech coming out from the audio system. For robust speech recognition in a car environment, it is necessary to extract a driver's voice command well by removing those background noises. Since we can handle the music and speech signals from an audio system in a car, the reverberated music and speech sounds can be removed using an acoustic echo canceller. In this paper, we implement an acoustic echo canceller with robust double-talk detection algorithm using TMS-320C6711 DSK. First we developed the echo canceller on the PC for verifying the performance of echo cancellation, then implemented it on the TMS320C6711 DSK. For processing of one speech sample with 8kHz sampling rate and 256 filter taps of the echo canceller, the implemented system used only 0.035ms and achieved the ERLE of 20.73dB.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.264-268
• /
• 2005

In the semiconductor and optical industry the non-contact transportation is required for reducing the damages. The ultrasonic levitation is the solution of the problem. In this paper, the ultrasonic levitation system and 3 disk-type stator for levitating various object are proposed. The vibration modes of disks are analyzed with FEM and designed with the analysis results. The 3D vibration profiles of the disks are measured by Laser scanning vibrometer for verifying the vibration characteristics of the system and the amplitudes of the disks and the levitation heights of object are measured for evaluating the performance.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1527-1530
• /
• 2005

In the semiconductor and optical industry the non-contact transportation is required for reducing the damages. The ultrasonic levitation is the solution of the problem. In this paper, the ultrasonic levitation system and 3 disk-type stator for levitation various object are proposed. The vibration modes of disks are analyzed with FEM and designed with the analysis results. The 3D vibration profiles of the disks are measured by Laser scanning vibrometer for verifying the vibration characteristics of the system. The amplitudes of the disks and the levitation heights of object are measured for evaluating the performance.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 춘계학술발표회논문집(1)
• /
• pp.153-158
• /
• 1997

This paper describes a formal safety analysis technique which is demonstrated by performing empirical formal safety analysis with the case study of beamline hutch door Interlock system that is developed by using PLC(Programmable Logic Controller) systems at the Pohang Accelerator Laboratory. In order to perform formal safety analysis, we have built the Z formal specifications representation from user requirement written in ambiguous natural language and target PLC ladder logic, respectively. We have also studied the effective method to express typical PLC timer component by using specific Z formal notation which is supported by temporal history. We present a formal proof technique specifying and verifying that the hazardous states are not introduced into ladder logic in the PLC-based safety critical system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.570-571
• /
• 2011

CTMS(Compact Tower Online Monitoring System), which deals with the polymer insulation arms of new material, is the on-line monitoring system for verifying stability and reliability of a new Compact Tower. CTMS measures real time data from the installed sensors in a Compact Tower and transmission line, air craft warning lights for detecting and determining the life time and the replace cycle of these facilities. This paper introduces how develop the CTMS and proposes how it will be use.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.647-649
• /
• 2001

It is a indispensible condition that the simulation and the experiment to improve a efficiency of maglev system. We usually carry out the simulation using the approximate equation, because it is impossible to use a exact modeling such as a practice modeling. This paper proposed a ideal simulation ap to the maglev system modeling by Finite Ele Method. To save the electrical energy, zero p control method is used, and verifying the feasibi FEM dynamic simulation, we make an exper with a TI DSP TMS320F240-based hardware.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.587-591
• /
• 1996

Usually triangular patches are used to transfer geometric shape in Rpaid Prototyping CAM system. STL, a list of triangles, is de facto in RP industry. Because STL has no topology data, it can cause errornous results. So, STL should be verified before using. After adding support structures to anchor the part to the platform and to prevent sagging or distortion, slicing and layer by layer manufacturing process are done. But triangular patch is surface model and cannot provide dufficient information on geometry in the above processes. So, geometric modeling is necessary in verifying STL, adding support structures, and slicing. It is natural that triangle based modeling is the best when traingular patches are used as input. Considering support structures, solid and faces coexist in RP process. Therefore non-manifold modeler is required. In this study, triangle based non-manifold geometric modeling is proposed for RP system consitent with STL input.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.597-601
• /
• 1996

Nowadays, the STL format, industrial standard data, which approximates three dimensional CAD model to triangular facets, is used for RP(Rapid Prototyping) system. Because most RP machine is accpted to only two dimensional line segments, but some STL translators are sometimes poorly implemented. The error verifying process is as follows. 1) Remove facets with two or more vertices equal to each other. 2) Fix overlapping error such as more than three facets adjacent to an edge. 3) Fill holes in the mesh by using Delaunay triangulation method. 4) Repair wrong direction and value of normal vectors. This paper is concerned with searching the mentioned errors in advance and modifying them.