• Journal of the Korean Society of Systems Engineering
• /
• v.13 no.1
• /
• pp.15-23
• /
• 2017

This paper describes verification of APR1400 reactor vessel by applying the system engineering approach, in which the design re-engineering method is used to check the design parameters of APR1400 RV (reactor vessel). The RV is classified as safety class 1 and therefore must adhere strictly to the rules of ASME BPVC section III, subsection NB and seismic category I. This study explores designing the RV by following the ASME guidelines and making a comparative study with the current design. To meet this objective we apply system engineering methodologies to structure the process and allow for verification and validation of the major RV design parameters such as thickness of RV. The structural thicknesses of various part of RV are determined as well as reinforcements on the RV major nozzles. A 3D virtual reality model was created based on the design parameters using CATIA V5 and animation using Dassault Composer V2016. A comparison of re-engineered ARP1400 RV and standard APR1400 RV was done to show which design parameters were taken more conservative approach.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.1
• /
• pp.24-30
• /
• 2013

The Korea Navy has been making constant efforts to apply M&S (modeling and simulation) to naval ship development, and the generalization of M&S for ship development is a trend. M&S for ship design is used for the V&V (verification and validation) of its design and operation, including design verification and ergonomic design that considers the crew using the Naval Ship Product Model. In addition, many parts of this M&S are repeatedly accomplished regardless of the kinds of ships. This study aims to standardize M&S, which repeatedly applies similar verifications for operation scenarios. A congestion assessment simulation for the major spaces of ships was the subject of the standardization based on the leading research results of various researchers, and a simulation automation solution was suggested. An information model using XML was proposed through the simulation automation concept, and a prototype system based on it was implemented. The usability was shown through a case study that verified the operability performance of the crew messroom.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1167-1173
• /
• 2011

This study is described for the RAMS activities of performed to 2008.12 ~ 2010.10 KTX CTC Project. RAMS activities follow EN50126, EN50128, EN50129. CENELEC standards(EN50126, EN50128, EN50129) to the System Development Life-cycle are defined. This study is RAMS activities of life-cycle that can be found to satisfy SIL2. In addition, assessment of the ISA was completed. This paper is describe RAMS activities results of each phase and Safety Case according to Verification/Validation result.

• Journal of Korean Society for Atmospheric Environment
• /
• v.7 no.3
• /
• pp.150-155
• /
• 1991

The Gaussian models were selected as the reference models for the study. During the study of the model verification in the Ulsan Industrial Complex, the accuracy and limitation of models were assessed. The correlation coefficients of the observed and the predicted values for CDM 2.0 and TCM2B were ranged from 0.57 to 0.73 and from 0.72 to 0.86, respectively. And there were relatively large discrepancies between the predicted and predicted and the measured concentrations for several locations. Therefore, the Gaussian models should be used with careful discretion to apply the urban area in Korea.

• 시스템엔지니어링워크숍
• /
• s.4
• /
• pp.90-94
• /
• 2004

System engineering(SE) management techniques applied for space launch system development are introduced to assess the current status and address the effwctiveness of these techniques. Management plans and guides are prepared for the work breakdown structure , data, comfiguration, interface control, Quality assurance, procurement, reliability, risk and verification/validation . Further improvement is required for the system engineering management plan(SEMP) to merge the international cooperation into current engineering managment system.

• Proceedings of the Safety Management and Science Conference
• /
• 2001.05a
• /
• pp.77-81
• /
• 2001

Burn-in is a test procedure to find and eliminate the inherent initial failure of a product during or at the final stage of production process. Software testing is the validation and verification process which is used to cut off the faults from a software. The two have the common function and objective of "debugging". This article summarizes some significant models on the optimal hardware and software burn-in time, and provides the relevant paper lists. The need for the development of the unified burn-in policy of a hardware-software system is addressed.addressed.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.23 no.1
• /
• pp.43-65
• /
• 1998

This paper develops a two-echelon inventory model with time-weighted partial backorders. The presented model assumed to follow continuous review (Q. r) policy for both the retailers and the central warehouse under stochastic demand. A heuristic method to find an optimum-tending solution for total variable system cost per year incurred at the central warehouse and retailers in a system is suggested. To show the usefulness of the above model, numericla examples are illustrated for verification and validation purpose.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.10a
• /
• pp.391-395
• /
• 2001

Model verification, validation and accreditation (VV&A) of system simulation are detailedly discussed in this paper. The necessity of VV&A is explained by analyzing the factors on which the model and the reality are discrepant. The W&A technology is expounded in detail not only in the conceptual aspect but also in the methodological aspect. Some principles, difficulties and problems that should be paid attention to are discussed concretely and reasonedly. The paper is expected to be instructional and helpful to the VV&A study.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.19 no.38
• /
• pp.61-68
• /
• 1996

Quality Assurance Principles must be effectively implemented in developments and in use of safety critical software in nuclear industry. Brief definitions related to computer software and quality assurance were defined and several methods for evaluating software quality were proposed herewith. Independent verification and validation was suggested to assure the quality of safety critical software.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2003.05a
• /
• pp.86-86
• /
• 2003