• 대한물리치료과학회지
• /
• 제9권3호
• /
• pp.141-150
• /
• 2002

Most of physical therapists has thought be exposed themselves to risk of hospital infection but it is reported that have been low concern about infection management. Above like this haven t done systematical education on hospital infection, also physical therapist's information management of infection disease is found very low. It is lack of driving information about disease condition of the patients. Physical therapists has thought their working room may be polluted a lots of micro-organism(%). The control situation of infection waste articles, only 53% responded that the controller has managed very intensive so we can feel to need more intensive It's reported that air culture investigation of physical therapy room has never initiated. To wash the hand, before, after treatment of the patients of physical therapist, is very low frequency. And 73% have responded that the time to wash the hand stays 15-45 second. It is examined that 70% physical therapy room is equipped with washing system, a response of 58% disinfects physical therapy room 1-2times per one month. 36% responded disinfection of treatment modality have done everyday, 25% responded have never done. The location physical therapy room is above one floor - 65%. A response of 57% is ventilation system sufficiency, it is considered that physical therapists needs more efforts on management of hospital infection.

• 한국연소학회지
• /
• 제15권3호
• /
• pp.32-39
• /
• 2010

An experimental study was conducted to investigate the relationship between global equivalence ratio(GER) and fire characteristics in an ISO 9705 room. Heptane fuel was burned with different fuel flow rates and doorway widths in order to force the room to be placed in different GER conditions. It was observed that after the onset of under-ventilated fire conditions, temperature and unburned fuel components such as CO and soot increased with increasing heat release rate (HRR), regardless of the doorway width. From the analysis of local mixture fraction, it was reconfirmed that the inclusion of soot production in the product composition was very important to predict accurately the chemical conditions inside the compartment, particularly for the under-ventilated fire conditions. In addition, the local equivalence ratio (LER) was directly proportional to the GER with a unit gradient regardless of doorway width when the soot production was included in the chemical products. This finding provided an important potential that the GER could be used to correlate the local thermal and chemical environment measured at the upper layer of a full-scale enclosure when soot was included.

• KIEAE Journal
• /
• 제8권4호
• /
• pp.3-9
• /
• 2008

The rapid urbanization after 1970s caused the shortage of dwellings in urban areas. As the result, the underground dwellings were developed to compensate for the insufficient dwelling spaces. While the underground dwellings have some advantage in the respect of thermal and acoustic environment, they usually have the basic problems in the indoor air quality because of the lack of natural ventilation through small window areas. The purpose of this study is to investigate and to improve the indoor air quality of underground dwellings. Thirty Units in Seoul and Gyung-Gi Province were investigated into the indoor environmental conditions. For the purpose of the improvement of their indoor air quality, Automatically-operated ventilating fan was installed in a sample unit which has worst indoor environmental condition. Then the indoor air quality was monitored when it was operated by $CO_2$ control system and timer. Finally economic feasibility study was made considering the effect of the improvement of indoor air quality. The extra cost for installing timer could be paid back only in 10 months, so timer-installed automatic fan is recommended to improve the indoor air quality of underground dwellings.

• 한국산업보건학회지
• /
• 제7권2호
• /
• pp.171-180
• /
• 1997

The objectives of this study were both 10 discuss the sampling method for airborne metalworking fluids(MWF)' mist and 10 suggest measures to minimize worker's exposure to carcinogen contained in metalworking fluids. In order to measure airborne MWF mist, it seems to be appropriate to use NIOSH Method #0500(filler weight) rather than NIOSH Method # 5026(analysis by FTIR). Because MWF mist on PVC filter evaporated and migrated during sampling, worker's exposure to MWF could be underestimated. So, when evaluating worker's exposure to MWF mist, other environmental conditions also must be considered. Enclosure and local exhaust ventilation system seems to he the most effective measure and must be constructed with process facility. In order to control worker exposure to carcinogens contained in MWF, distillation type and condition for crude oil, PAH concentration in MWF, and viscosity index of MWF must legally be described.

• 한국보건간호학회지
• /
• 제9권2호
• /
• pp.43-51
• /
• 1995

Many poeple has been engaged in industry is aware of the dangers from exposure to high intensity nose levels. The exposure to high intensity noise is encountered in a large number of situations. Laws governing the safety and health of employed people being to create a suitable working environment and eliminate unsafety practices and processes. Work areas should be designed and laid out so that they are satisfactory both from the environmental and safety points of view. In this connection safety also implies that noise is kept at a level which is not likety to cause hearing damage. This study was performed to measure the noise of press and assembly process in an automobile factory. and suggested the method of noise control. Consequently the effect ways of reducing level in working environment are as follows; 1. Changes to machines which would reduce noise generation. 2. Alteration of equipment to avoid impact in machinery and handing materials. 3. Enclosure of noisy machines or machine parts. 4. Mounting of attenuators on gas and air outlets as well as ventilation ducts. 5. Erection of sound absorbing screens. linings. and baffles in work areas. 6. The personal ear protectors can be chosen to protect the workers.

• 한국유체기계학회 논문집
• /
• 제12권5호
• /
• pp.25-32
• /
• 2009

A study is conducted to improve the suction performance on suction devices which are used to remove polluted air generated by welding or machining process in a spacious working place of industry. Air-curtain is applied around the inlet of suction duct to interrupt the inflow of fresh air from the downstream region where is located opposite to the polluted air source. Two different air-curtain devices, such as a $45^{\circ}$ backward and a fully backward, are adopted. Suction region is experimentally investigated by measuring the suction velocities using a hot-wire anemometer. Contours of the suction velocity are compared with the computed results. The suction condition is selected to 110,000 Reynolds number which is widely used on typical suction devices, and a width of blowing passage for creating the air-curtain is chosen to 9.38% of the suction duct diameter. The experimental results show that the suction performance obtained with the $45^{\circ}$ backward air-curtain was better than that obtained with the fully backward air-curtain. On the suction duct using the $45^{\circ}$ backward air-curtain, the suction region estimated on basis of the 0.4m/sec is improved by 66% at the same input power.

• 한국농촌건축학회논문집
• /
• 제12권3호
• /
• pp.47-56
• /
• 2010

In a study of a peculiarity of the Korean residence construction as the central Jeong Yeo Chang's Residence, we proposed varieties service models for an anthropocentric U-Korean style with "a convenience, a security, an economical, a pleasure". It was to assume for this research that was established in case of all necessity IT infrastructures, and was structural alterations to a Korean residence sectional. It was used for Wall-Pad(Home Gateway) for controlling services, gas valves, remote inspection of a meter, curtains, doorlocks, boilers, temperature controllers, indoor ventilation systems, breakers, and expansion of crime prevention, energy. With introducing various service models on U-Korean style house, removing a negative view about Korean residence, we drew the best suited residence condition combining with a merit of the Korean residence and the Ubiquitous Intelligent Home Service. In order to realize U-Korean style house at the right time at the right place, a maintenance was required to be ensured based on social infrastructures and institutions and laws.

• 한국가정과교육학회지
• /
• 제13권3호
• /
• pp.161-175
• /
• 2001

This study researched the interrelation between the development of the middle school student\` personality and their residential environments on 406 middle school students. The purpose of this research were to suggest a better residential environment as a desirable educational condition for making juveniles\` sound self-realization. The results of this research were as follows. 1. According to the their parents\` social status on middle school students\` personality the students. especially their parents had a service and technical expert official job of a better academic career showed an excellent score in personality. 2. According to the relation between the residential environment on their personality. it was said that the students. (1) who had their own study room at their own house. (2) who had a better house equipment and relatively a safety from fire danger. (3) who were living at the house which had been equipped a ventilation and sound isolation. were higher in the Personality score than any other groups. 3. According to the neighborhood and their personality the students who were living in some comfortable environments such as the divided collect of trash and the neighborhood natural surroundings skewed a high score in personality.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1995년도 추계 학술대회논문집
• /
• pp.160-168
• /
• 1995

This paper describes computational efforts on the various energy and environmental problems using Patankar's SIMPLE method. The specific problems included in this study are : pollutant and flammable material dispersions in open and confined areas, aerator-induced flow in a lake for DO(dissolved oxygen) concentration, primary clarifier for water and waste water treatment, hood ventilation in workplace, cyclone and LNG combustors and Dow chlorination reactor. A control-volume based finite-difference method is employed together with the power-law scheme. The pressure-velocity coupling is resolved by the use of the revised version of SIMPLE, says SIMPLER and SIMPLEC. The Reynolds stresses are closed using the standard or the RNG $k-{\varepsilon}$ models. Turbulent reaction is modeled using two fast chemistry methods such as eddy breakup and conserved scalar models. Further, a nonequilibrium model is developed for the application of the chlorination process in the Dow reactor. Other important empirical models and physical insights appeared in this study are presented and discussed in a brief note. The computational method developed in this study is considered, in general, as a viable tool for the design and determination of the optimal condition of various engineering system of interest.

• 한국화재소방학회논문지
• /
• 제25권5호
• /
• pp.62-68
• /
• 2011

본 연구는 고체가연물의 초기 점화 및 화재성장과정에서의 발열량을 정량적으로 측정하고 가연물에 따른 화재성장특성 파악하고자 한다. 실험에 적용된 고체가연물은 단일/이중 목재크립, 단일/이중 쿠션, 카페트/목재크립이며 화재발달 단계에서 화재성장특성을 시간 제곱 화재성장 시나리오와 비교분석하고 고체가 연물의 화재성장 계수를 정량화 하였다. 고체가연물의 연소과정에서 소모되는 연료의 질량과 방출되는 총열에너지 개념을 이용하여 가연물의 평균 유효연소율을 평가하였으며 환기 및 화재조건의 영향을 분석하여 화재해석시 화재시나리오를 설정하는데 있어서 실질적인 정보를 제공하고자 한다.