• Science of Emotion and Sensibility
• /
• v.1 no.2
• /
• pp.81-91
• /
• 1998

운전자의 안전과 감성적 요구사항이 중요시 되는 차세대 자동차의 IP(Instrument Panel) 설계를 위해 운전자으 인지특성을 고려하였다. 오디어 유닛과 HVAC(Heat, Ventilation and Air Condition)등의 주요 IP 구성요소 설계에 중점을 두었으며, 운전자의 인지특성과 가장부합하는 형태의 IP를 도출하기 위해 인지실험을 실시하였다. 첫 번째로, 기존의 차량에 설계된 IP 궁성요소를 분석하였으며, 이를 바탕으로 버튼의 수와 배열, LCD패널의 위치등을 조합하여 총 16개의 IP 프로토타입을 제작하였다. 다음으로, 제작된 프로타입을 각각 0.2, 0.4, 0.6초의 간격으로 Tachisto scope를 이용하여 피실험자에게 제시한후, 인간의 인지 지도(Human cognitive Map)에 근거한 '그리가 방법(Drawing Method)'을 이용하여 그들의 단기기억(Short-term Memory)상의 정보를 주어진 답안지에 그리도록 하였다. 이 인지실험의 다구찌 분석을 통하여 운전자의 인지특성을 고려한 최적의 IP형태를 제시하였다.

• Economic and Environmental Geology
• /
• v.31 no.5
• /
• pp.425-430
• /
• 1998

The results of radon $(^{222}Rn)$ concentrations and working levels (WL) for forty rooms in Kwanak Campus, Seoul National University on granite bedrock of Jurassic age showed that radon concentration have mean value of 3.0 pCi/L and 0.011 for working level. A number of rooms where these values exceed the EPA's action level are five (13%). It was also suggested that indoor basement rooms in poor ventilation condition can be classified as extremely high radon risk zone having more than 4 pCi/L and 0.020 WL. It was proved that inflow of soil-gas was a primary factor that governs indoor radon level by comparison of soil-gas radon concentrations with indoor radon concentrations.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.577-582
• /
• 2008

The present study has been conducted to study the performance of Dedicated outdoor air handling unit. Dedicated outdoor air handling unit consists of pre-cooler, dehumidification and after cooler. By combining dedicated outdoor air-conditioning and heat pump, a new four-season dedicated outdoor air handling unit has been developed. Amount of energy saved and condition when this new system is superior to conventional vapor-compression cooling system has been presented.

• Wind and Structures
• /
• v.13 no.3
• /
• pp.257-273
• /
• 2010

The aerodynamic and aero-elastic model tests of the China''s highest cooling tower has been carried out in the TJ-3 Boundary Layer Wind Tunnel of Tongji University. By adopting a scanivalve system, the external wind pressure is firstly measured on $12{\times}36$ taps for a single tower, two and four grouped towers under the condition of both smooth flow and the boundary layer due to surrounding geographic and building topography. The measurements of internal wind pressure distribution of $6{\times}36$ taps are taken for a single tower under the various ventilation ratios ranging from 0% to 100% of stuffing layers located at the bottom of the tower. In the last stage, the wind tunnel tests with an aero-elastic model are carefully conducted to determine wind-induced displacements at six levels (each with eight points) with laser displacement sensors. According to the measurement results of wind pressure or vibration response, the extreme aerodynamic loading values of the single or grouped towers are accordingly analyzed based on probability correlation technique.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.1
• /
• pp.36-42
• /
• 2007

The latest cars give much importance in the role of HVAC system that controls the environment of the area for passengers more than just basic capability In this study, we drew the automobile interior as three dimension and arranged a method of numerical analysis on HVAC environment in the automobile interior displaying air current distribution and temperature distribution through simulation of the automobile interior on the ventilation volume and outlet area, The aim of this study is to develop the estimated method for HVAC environment in the automobile interior. Results of numerical analysis, to cool automobile interior needs more considerations if thinking cheerful surroundings of automobile interior air but the more magnitude of outlet is small, the more cooling capability is excellent and realistic countermeasures about a realistic geometry and boundary condition.

• Journal of the Korean Society for Railway
• /
• v.7 no.4
• /
• pp.302-306
• /
• 2004

Many long railway tunnels without emergency evacuation system or ventilation system are under construction or in-use in Korea. In the case of tunnel-fire, many fatalities are occur in current condition. Current safety level is estimated in this study, for the efficient investment on safety. But so many uncertainties in major input parameters make the safety estimation difficult. In this study, probabilistic techniques are applied for the consideration of uncertainties in major input parameters. As results of this study, accident scenarios and survival ratio under tunnel fire accident are determined for various conditions.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.185-191
• /
• 2006

Auxiliary power supply developed by domestic technology has very important function that not only effect on main power converter & inverter system, traction motor and train control system which are related to performance of train, but also influence on power supply for HVAC(Heat, Ventilation, Air-conditioning) and lighting device which are related to comfort of passengers. This paper shows characteristic test results of auxiliary power supply such as working condition and performance, which is associated with velocity of train, operating mode and surrounding equipment, through test running. Also it shows the results deduced from comparison analysis between designed data and manufactory test data as measuring in put voltage of auxiliary power supply. And, it propose a modification of design parameter for stabilizing operation and improving reliability.

• Journal of the Korean Society for Railway
• /
• v.10 no.1 s.38
• /
• pp.84-87
• /
• 2007

Auxiliary power supply developed by domestic technology has very important function that not only effect on main power converter & inverter system, traction motor and train control system which are related to performance of train, but also influence on power supply for HVAC(Heat, Ventilation, Air-conditioning) and lighting device which are related to comfort of passengers. This paper shows characteristic test results of auxiliary power supply such as working condition and performance, which is associated with velocity of train, operating mode and surrounding equipment, through test running. And, it propose a modification of design parameter for stabilizing operation and improving reliability.

• International Journal of Automotive Technology
• /
• v.8 no.2
• /
• pp.219-224
• /
• 2007

Recently, atmospheric contaminations has become worse due to the increased number of automobile. The PCV (Positive Crankcase Ventilation) valve acts as a flow control to allow re-combustion of blow-by gas by having it flow from a crankcase to an inlet manifold suction tube. Also, during the fabrication of the PCV valve, micro cracks may occur in the valve body and be extended under operation. The excessive stress distribution and crack initiation on the PCV valve body would bring an unstable blow-by gas flow rate control and would cause valve failure. The purpose of this study is to examine the crack affects on the stress and strain variations on the PCV valve according to the inlet and outlet manifold under differential pressures. From the results, we can explain the behavior of the crack extension for a safe condition of PCV valve.

• Journal of Trauma and Injury
• /
• v.27 no.3
• /
• pp.75-78
• /
• 2014

Hypopharyngeal perforation is a rare, but fatal, complication. Clinical signs and symptoms of this condition are neck pain, odynophagia, dysphagia, fever, vomiting, cervical swelling and subcutaneous emphysema. However, these signs are obscured in patient suffering from severe trauma who has had an endotracheal tube inserted, which delay proper evaluation and treatment. Here, we report a case of hypopharyngeal perforation in a trauma patient who had an endotracheal tube inserted for mechanical ventilation.