• Computers and Concrete
• /
• 제8권1호
• /
• pp.111-123
• /
• 2011

Severe element distortion problem is observed in finite element mesh while performing numerical simulations of high velocity steel projectiles penetration/perforation of concrete targets using finite element method (FEM). This problem of element distortion in Lagrangian formulation of FEM can be resolved by using element erosion methodology. Element erosion approach is applied in the finite element program by defining failure parameters as a condition for element elimination. In this study strain parameters for both compression and tension at failure are used as failure criteria. Since no direct method exists to determine these values, a calibration approach is used to establish suitable failure strain values while performing numerical simulations of ogive-nose steel projectile penetration/perforation into concrete target. A range of erosion parameters is suggested and adopted in concrete penetration/perforation tests to validate the suggested values. Good agreement between the numerical and field data is observed.

• 한국안전학회지
• /
• 제11권4호
• /
• pp.3-9
• /
• 1996

In this study, comparison of theoretical solutions with experimental results is examined through fracture conditions for the case of float glasses subjected static loading. The range of fracture generation limits and critical penetration energies are solved according to the impactor mass under the high velocity, and analytical method of fracture strength and penetration strength are presented. Also, fracture patterns are investigated according to impact velocities. The results obtained from this study are as follows ; 1) Radial cracks are generated from the loading point regardless of plate thickness in the case of the plate subjected to the static loading. In the case of high-speed impact, dimensions of ring cracks become to smaller and length of radial cracks becomes shorter with the rapidity of impact velocity. 2) Kinetic change volume of collision after/before is constant regardless of velocities over the range of critical penetration velocity. 3) Although the same impact energy is working, the critical penetration energy is increased with the shorter of impactor mass. 4) Although the same impact energy is working, the penetration fracture of lighter Impactor mass is generated more than that of heavier impactor mass, and the impulse of lighter impacter mass appear more than that of heavier impactor mass. Therefore, the penetration fracture in the case of greater impulse is generated earlier regardless of the of the dimensions of Impact loading.

• 한국지반공학회논문집
• /
• 제31권11호
• /
• pp.25-31
• /
• 2015

연속 동하중을 지지하는 철도노반의 탄성거동은 대상 상부노반의 전단탄성계수에 주된 영향을 받으므로, 일정한 다짐도로 조성된 상부노반에서의 전단파속도 획득은 대상 지반의 탄성거동 예측에 활용될 수 있다. 본 연구에서는 상부노반에서 수행된 동적 콘 관입시험(DCPT) 결과로부터 전단파속도($V_s$)를 추정하기 위하여 동적 콘 관입지수(DCPI)와 전단파속도의 상호관계를 제시하고자 하였다. 상호관계의 신뢰도를 확보하기 위하여 동적 콘 관입시험 및 전단파속도 획득은 시공 완료된 철도 상부노반에서 수행되었다. 전단파속도 획득 방법으로서 cross hole 방법이 사용되었으며, 수신기와 발신기의 중간 위치에서 동적 콘 관입시험이 수행되었다. 동일한 심도에서의 동적 콘 관입지수 및 전단파속도 비교 결과, 전단파속도는 결정계수가 0.8 이상인 동적 콘 관입지수의 거듭제곱 형태로 나타났다. 본 연구결과는 동적 콘 관입기를 이용한 상부노반의 강도평가와 동시에 전단파속도 추정 방법으로써 유용하게 사용될 것이라 기대된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.656-665
• /
• 2010

Shear modulus has been recognized as one of the important soil properties in dynamic analysis of ground and can be calculated from in situ measurement of shear wave velocity. Field seismic tests are the most accurate but expensive methods to investigate dynamic ground characteristics. Due to that reason, empirical equations for estimating the shear wave velocity are widely used rather than conducting in-situ tests. The most common equations are based on the N value obtained in conjuctions with a standard penetration test. In this paper, the field datas of standard penetration test and suspension PS logging measured in 126 sites of Korea were summarized and the correlation equations between N value and shear wave velocity are suggested.

• 한국CDE학회논문집
• /
• 제18권5호
• /
• pp.367-373
• /
• 2013

In this study, the penetration characteristic from the cubic and cylindrical penetrator consisting of tungsten material with the velocity of 2,300 m/s is evaluated and the penetration possibility into the target is confirmed. The design of shape and size of penetrator is directly related to space and weight of the warhead. AUTODYN-3D simulation is used to study the penetration effect of penetrator. The purpose of numerical analysis is to verify the penetration characteristic with various L/D penetrator. The penetration performance of penetrator with identical weight due to the shape is also confirmed. The cylindrical and cubic penetrator has enough penetration energy on constant target body. Because the possibility of 2'nd penetration is important factor after 1'st penetration into target body, residual velocity of residual mass must be existed as much as possible. As geometrical shape ratio increases, penetration performance is confirmed to improve.

• 한국안전학회지
• /
• 제26권3호
• /
• pp.29-33
• /
• 2011

Experimental studies were performed to investigate the injury potential of BB pellets through gelatine based simulants. In order to record BB pellet movements penetrating into the target simulant, a high-speed video camera was used. In this study the first investigation involved the effects on concentrations, homogeneity and gelation times of the gelatine simulant. The second investigation involved the penetration depth of the pellets to the simulant by different distances between the BB gun and the simulant. The final one is associated with impact velocity, threshold velocity and penetration depth of the pellets by different kinetic energies of the BB gun. Results provided the basis in assessing the injury potential of BB pellets.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.273-278
• /
• 2003

Recently, high-performance hybrid composite materials have been used for various industrial fields because of their superior high strength, high stiffness and lower weight. In this study, manufactured hybrid composite materials are composed of two parts. One is hard-anodized Al5083-O alloy as a face material and the other is high strength aramid fiber ($Twaron^{(R)}$ CT709) laminates as a back-up material. Resistance to penetration is determined by protection ballistic limit($V_{50}$, a static velocity with 50% probability for complete penetration) test method. $V_{50}$ tests with $0^{\circ}$obliquity at room temperature were conducted with 5.56mm ball projectiles that were able to achieve near or complete penetration during high velocity impact tests.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.121.2-121.2
• /
• 2005

• 한국전산구조공학회논문집
• /
• 제32권2호
• /
• pp.133-140
• /
• 2019

본 논문은 Shaped charge jet(SCJ)의 관통 과정을 유한요소해석을 통해 모사하여 제트 입사속도, 관통률 그리고 관통량 증분과 같은 물리량들을 획득하였다. 이 물리량들을 hydrodynamic 이론에 적용하여 입사 제트 속도의 효율을 분석한 결과, 입사 속도가 빠른 제트의 관통 효율은 이어지는 느린 제트에 비해 높은 것을 확인하였다. 이 효율은 hydrodynamic limit(HL) 미만인 제트인 경우 큰 폭으로 감소하였다. 한편, 시간에 따른 관통량 증분과 제트 소모량의 비교는 SCJ의 이론적인 관통현상 분석을 위해서는 길이 연장 효과를 고려해야함을 보였다.

• 한국군사과학기술학회지
• /
• 제18권5호
• /
• pp.566-573
• /
• 2015

The most important factor for the penetration performance of shaped charge is the liner design. By designing the liner to have properties of both high jet tip velocity and long jet break-up time, the better penetration performance could be acquired. Usually it is very difficult to satisfy above two conditions simultaneously. In this study, the liner with the shape of ogive was developed to have relatively larger jet mass compared to the conventional trumpet liner. The designed shaped charge showed jet properties with high jet tip velocity and long jet break-up time by using ogive liner and wave shaper. A commercially available hydro-dynamic code AUTODYN-2D was used for numerical analysis of jet formation. The flash X-ray test and the static penetration test were conducted to verify the results of numerical analysis.